Not implemented
Parsed from file ibm-sysmon6k.mib.txt
Company: None
Module: SYSMON6K-MIB
Not implemented
Parsed from file MIDLEVELMGR-MIB.mib
Module: MIDLEVELMGR-MIB
Vendor: IBM
Module: MIDLEVELMGR-MIB
[Automatically extracted from oidview.com]
sm6kFilterThrottleDisarmedTrapEnterprise OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Not implemented" ::= { sm6kFilterEntry 31 }
smMlmFilterThrottleDisarmedTrapEnterprise OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Not implemented" ::= { smMlmFilterEntry 31 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.12.7.4.1.1 | smMlmFilterState, sm6kFilterState | 0 | 0 | State for the filter rule. When the state is set to invalid, the filter is deleted. When the filter entry is set to disabled, t… |
| 1.3.6.1.4.1.2.6.12.7.4.1.2 | smMlmFilterParticipationState, sm6kFilterParticipationState | 0 | 0 | This field indicates whether or not the rule is participating in the filter rule base. When the filter rule is active, it is par… |
| 1.3.6.1.4.1.2.6.12.7.4.1.3 | smMlmFilterName, sm6kFilterName | 0 | 0 | This field contains the name for a particular filter. The instance identifier associated with every field in the filter entry is … |
| 1.3.6.1.4.1.2.6.12.7.4.1.4 | smMlmFilterDescription, sm6kFilterDescription | 0 | 0 | Description of the filter. This field should contain a general description of what the filter accomplishes. A user should be ab… |
| 1.3.6.1.4.1.2.6.12.7.4.1.5 | smMlmFilterAction, sm6kFilterAction | 0 | 0 | This field is used to determine whether or not the matching trap is forwarded on to a manager station. If sendTraps is specified… |
| 1.3.6.1.4.1.2.6.12.7.4.1.6 | smMlmFilterEntryEnterpriseExpression, sm6kFilterEntryEnterpriseExpression | 0 | 0 | This field is used to match the rule against the enterpriseID contained in the received trap. The entry may be an alias name (fr… |
| 1.3.6.1.4.1.2.6.12.7.4.1.7 | smMlmFilterAgentAddrExpression, sm6kFilterAgentAddrExpression | 0 | 0 | This field is used to match against the address of the agent that generated the trap. The agent address expression is a comma se… |
| 1.3.6.1.4.1.2.6.12.7.4.1.8 | smMlmFilterGenericExpression, sm6kFilterGenericExpression | 0 | 0 | This field is used to match against the generic trap number contained in the received trap. This field allows a comma separated … |
| 1.3.6.1.4.1.2.6.12.7.4.1.9 | smMlmFilterSpecificExpression, sm6kFilterSpecificExpression | 0 | 0 | This field is used to match against the specific trap number contained in the received trap. This field allows a comma separated… |
| 1.3.6.1.4.1.2.6.12.7.4.1.10 | smMlmFilterVariableExpression, sm6kFilterVariableExpression | 0 | 0 | Not implemented |
| 1.3.6.1.4.1.2.6.12.7.4.1.11 | smMlmFilterTotalTrapsMatched, sm6kFilterTotalTrapsMatched | 0 | 0 | This field contains the number of traps that have matched this filter. This count is reset to zero whenever the filter entry's s… |
| 1.3.6.1.4.1.2.6.12.7.4.1.12 | smMlmFilterActivationTime, sm6kFilterActivationTime | 0 | 0 | This field specifies the time to activate the filter (ie. change the participation state from inactive to active). The format sho… |
| 1.3.6.1.4.1.2.6.12.7.4.1.13 | smMlmFilterActivationDayOfWeek, sm6kFilterActivationDayOfWeek | 0 | 0 | This field specifies the days of the week to activate the filter at the time specified in the ActivationTime field (ie. change th… |
| 1.3.6.1.4.1.2.6.12.7.4.1.14 | smMlmFilterDeactivationTime, sm6kFilterDeactivationTime | 0 | 0 | This field specifies the time to deactivate the filter (ie. change the participation state from active to inactive). The format s… |
| 1.3.6.1.4.1.2.6.12.7.4.1.15 | smMlmFilterDeactivationDayOfWeek, sm6kFilterDeactivationDayOfWeek | 0 | 0 | This field specifies the days of the week to deactivate the filter at the time specified in the DeactivationTime field (ie. chang… |
| 1.3.6.1.4.1.2.6.12.7.4.1.16 | smMlmFilterTrapDestinations, sm6kFilterTrapDestinations | 0 | 0 | This field specifies the destinations for any traps that match the filter criteria specified. This field allows ip addresses, al… |
| 1.3.6.1.4.1.2.6.12.7.4.1.17 | smMlmFilterMatchedCommand, sm6kFilterMatchedCommand | 0 | 0 | This field specifies the command to be executed when a received trap matches the filter. A set of environment variables are defi… |
| 1.3.6.1.4.1.2.6.12.7.4.1.18 | smMlmFilterMatchedTrapDescription, sm6kFilterMatchedTrapDescription | 0 | 0 | Not implemented |
| 1.3.6.1.4.1.2.6.12.7.4.1.19 | smMlmFilterMatchedTrapEnterprise, sm6kFilterMatchedTrapEnterprise | 0 | 0 | Not implemented |
| 1.3.6.1.4.1.2.6.12.7.4.1.20 | smMlmFilterMatchedSpecificTrap, sm6kFilterMatchedSpecificTrap | 0 | 0 | Not implemented |
| 1.3.6.1.4.1.2.6.12.7.4.1.21 | smMlmFilterThrottleType, sm6kFilterThrottleType | 0 | 0 | This field is used to indicate whether the throttle sends the first N matching traps (sendFirstN) or sends after receiving N matc… |
| 1.3.6.1.4.1.2.6.12.7.4.1.22 | smMlmFilterThrottleArmTrapCount, sm6kFilterThrottleArmTrapCount | 0 | 0 | This field specifies the number of matching traps to receive before throttling is armed. This is the N referred to in the Filter… |
| 1.3.6.1.4.1.2.6.12.7.4.1.23 | smMlmFilterThrottleArmedCommand, sm6kFilterThrottleArmedCommand | 0 | 0 | This field specifies the command to execute when the ThrottleArmTrapCount number of traps have been received (ie. when the thrott… |
| 1.3.6.1.4.1.2.6.12.7.4.1.24 | smMlmFilterThrottleArmedTrapDescription, sm6kFilterThrottleArmedTrapDescription | 0 | 0 | Not implemented |
| 1.3.6.1.4.1.2.6.12.7.4.1.25 | smMlmFilterThrottleArmedTrapEnterprise, sm6kFilterThrottleArmedTrapEnterprise | 0 | 0 | Not implemented |
| 1.3.6.1.4.1.2.6.12.7.4.1.26 | smMlmFilterThrottleArmedSpecificTrap, sm6kFilterThrottleArmedSpecificTrap | 0 | 0 | Not implemented |
| 1.3.6.1.4.1.2.6.12.7.4.1.27 | smMlmFilterThrottleDisarmTimer, sm6kFilterThrottleDisarmTimer | 0 | 0 | This field specifies the time period to elapse before the throttle is disarmed (reset). It is important to note that if sm6kThro… |
| 1.3.6.1.4.1.2.6.12.7.4.1.28 | smMlmFilterThrottleDisarmTrapCount, sm6kFilterThrottleDisarmTrapCount | 0 | 0 | This field specifies the delta number of traps to receive before the throttle is disarmed. This field value is a delta and only … |
| 1.3.6.1.4.1.2.6.12.7.4.1.29 | smMlmFilterThrottleDisarmedCommand, sm6kFilterThrottleDisarmedCommand | 0 | 0 | This field specifies the command to execute when the throttle is DISARMED. The throttle is disarmed when either 1) the smMlmThr… |
| 1.3.6.1.4.1.2.6.12.7.4.1.30 | smMlmFilterThrottleDisarmedTrapDescription, sm6kFilterThrottleDisarmedTrapDescription | 0 | 0 | Not implemented |
| 1.3.6.1.4.1.2.6.12.7.4.1.32 | smMlmFilterThrottleDisarmedSpecificTrap, sm6kFilterThrottleDisarmedSpecificTrap | 0 | 0 | Not implemented |
| 1.3.6.1.4.1.2.6.12.7.4.1.33 | smMlmFilterThrottleState, sm6kFilterThrottleState | 0 | 0 | This field is not supported. |
| 1.3.6.1.4.1.2.6.12.7.4.1.34 | smMlmFilterThrottleTimeStarted, sm6kFilterThrottleTimeStarted | 0 | 0 | This field is not supported. |
| 1.3.6.1.4.1.2.6.12.7.4.1.35 | smMlmFilterThrottleTrapCount, sm6kFilterThrottleTrapCount | 0 | 0 | This field is not supported. |
| 1.3.6.1.4.1.2.6.12.7.4.1.36 | smMlmFilterMessages | 0 | 0 | Contains informational and error messages for this filter rule. |
| 1.3.6.1.4.1.2.6.12.7.4.1.37 | smMlmFilterThrottleCriteria | 0 | 0 | This field is used to indicate whether the throttle is to be applied on a per node and trap type basis (byNodeAndTrapType) or onl… |
| 1.3.6.1.4.1.2.6.12.7.4.1.38 | smMlmFilterThrottleVariables | 0 | 0 | This field is used to set additional criteria for variables of which the traps will be throttled. These variables are contained i… |