An entry exists in this table for each device entry in the
hostmib device table who's type is 'printer'.
Parsed from file ibm4312x.mib.txt
Company: ibm
Module: IBM-4312-Printer-Ext-V1-MIB
Vendor: IBM
Module: IBM-4312-Printer-Ext-V1-MIB (ibm4312x.mib)
Type: ENTRY
Access: not-accessible
Syntax: Ibm4312Prtx1InterpreterIPDSEntry
Automatically extracted from www.mibdepot.com
ibm4312Prtx1InterpreterIPDSEntry OBJECT-TYPE SYNTAX Ibm4312Prtx1InterpreterIPDSEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry exists in this table for each device entry in the hostmib device table who's type is 'printer'." INDEX { hrDeviceIndex } ::= { ibm4312Prtx1InterpreterIPDSTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.123.15.102.1.1.1 | ibm4312Prtx1InterpreterIPDSDefaultCharsPerInch | 0 | 0 | Selects characters-per-inch (pitch) for the default font. The proper units and valid range for this value are specified by ibm43… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.2 | ibm4312Prtx1InterpreterIPDSCharsPerInchUnit | 0 | 0 | The units of measure for ibm4312Prtx1InterpreterIPDSDefaultCharsPerInch, ibm4312Prtx1InterpreterIPDSCharsPerInchMin, and ibm4312Pr… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.3 | ibm4312Prtx1InterpreterIPDSCharsPerInchMin | 0 | 0 | The minimum allowable value for ibm4312Prtx1InterpreterIPDSDefaultCharsPerInch. The units are specified in ibm4312Prtx1Interprete… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.4 | ibm4312Prtx1InterpreterIPDSCharsPerInchMax | 0 | 0 | The maximum allowable value for ibm4312Prtx1InterpreterIPDSDefaultCharsPerInch. The units are specified in ibm4312Prtx1Interprete… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.5 | ibm4312Prtx1InterpreterIPDSDefaultFGID | 0 | 0 | Specifies the default FGID (Font typeface Global IDentifier), which identifies the default resident font the printer uses. The v… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.6 | ibm4312Prtx1InterpreterIPDSEdgeToEdge | 0 | 0 | Turns edge-to-edge printing off or on. off: the printer maintains a border of 4 mm on all four paper sides. on: the printer allo… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.7 | ibm4312Prtx1InterpreterIPDSEmulation | 0 | 0 | Specifies the printer to emulate. prt4312 should only be selected if the appropriate level of PSF software is installed. |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.8 | ibm4312Prtx1InterpreterIPDSEPC | 0 | 0 | Turns Early Print Completion (EPC) off or on for jobs sent over the twinax attachment. off: the printer waits until the j… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.9 | ibm4312Prtx1InterpreterIPDSFontSub | 0 | 0 | Turns font substitution off or on. |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.10 | ibm4312Prtx1InterpreterIPDSPage | 0 | 0 | See the 'IBM Network Printers: Twinax/Coax Configuration Guide' for a detailed description of the settings for this variable. |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.11 | ibm4312Prtx1InterpreterIPDSPort | 0 | 0 | The value of prtChannelIndex for the attachment used for IPDS jobs. Must specifiy Coax, Twinax, TokenRing, or Ethernet. A value… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.12 | ibm4312Prtx1InterpreterIPDSVPACheck | 0 | 0 | Turns Valid Printable Area (VPA) checking off or on. off: the printer does not report pels outside the valie printable area. on: … |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.13 | ibm4312Prtx1InterpreterIPDSXOffset | 0 | 0 | Sets the print offset in the X (horizontal direction. Positive values move the starting point for printing to the right on a por… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.14 | ibm4312Prtx1InterpreterIPDSXOffsetUnit | 0 | 0 | The unit of measure for ibm4312Prtx1InterpreterIPDSXOffset, ibm4312Prtx1InterpreterIPDSXOffsetMin, and ibm4312Prtx1InterpreterIPDS… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.15 | ibm4312Prtx1InterpreterIPDSXOffsetMin | 0 | 0 | The minimum allowable value for ibm4312Prtx1InterpreterIPDSXOffset. The unit is specified by ibm4312Prtx1InterpreterIPDSXOffsetUn… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.16 | ibm4312Prtx1InterpreterIPDSXOffsetMax | 0 | 0 | The maximum allowable value for ibm4312Prtx1InterpreterIPDSXOffset. The unit is specified by ibm4312Prtx1InterpreterIPDSXOffsetUn… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.17 | ibm4312Prtx1InterpreterIPDSYOffset | 0 | 0 | Sets the print offset in the Y (vertical) direction. Positive values move the starting print for printing toward the bottom of a… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.18 | ibm4312Prtx1InterpreterIPDSYOffsetUnit | 0 | 0 | The unit of measure for ibm4312Prtx1InterpreterIPDSYOffset, ibm4312Prtx1InterpreterIPDSYOffsetMin, and ibm4312Prtx1InterpreterIPDS… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.19 | ibm4312Prtx1InterpreterIPDSYOffsetMin | 0 | 0 | The minimum allowable value for ibm4312Prtx1InterpreterIPDSYOffset. The unit is specified by ibm4312Prtx1InterpreterIPDSYOffsetUn… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.20 | ibm4312Prtx1InterpreterIPDSYOffsetMax | 0 | 0 | The maximum allowable value for ibm4312Prtx1InterpreterIPDSYOffset. The unit is specified by ibm4312Prtx1InterpreterIPDSYOffsetUn… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.21 | ibm4312Prtx1InterpreterIPDSPageProtect | 0 | 0 | Sets page protection: on: the printer reserves enough memory to process an entire page without compression before it prints th… |