Specifies the default FGID (Font typeface Global IDentifier),
which identifies the default resident font the printer uses.
The valid set of values for this variable are specified in
ibm4312Prtx1InterpreterIPDSSetFGID.
Parsed from file ibm4312x.mib.txt
Company: ibm
Module: IBM-4312-Printer-Ext-V1-MIB
Vendor: IBM
Module: IBM-4312-Printer-Ext-V1-MIB (ibm4312x.mib)
Type: TABULAR
Access: read-write
Syntax: Integer32
Automatically extracted from www.mibdepot.com
ibm4312Prtx1InterpreterIPDSDefaultFGID OBJECT-TYPE SYNTAX Integer32 ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the default FGID (Font typeface Global IDentifier), which identifies the default resident font the printer uses. The valid set of values for this variable are specified in ibm4312Prtx1InterpreterIPDSSetFGID." ::= { ibm4312Prtx1InterpreterIPDSEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.123.15.102.1.1.1 | ibm4312Prtx1InterpreterIPDSDefaultCharsPerInch | 0 | 0 | Selects characters-per-inch (pitch) for the default font. The proper units and valid range for this value are specified by ibm43… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.2 | ibm4312Prtx1InterpreterIPDSCharsPerInchUnit | 0 | 0 | The units of measure for ibm4312Prtx1InterpreterIPDSDefaultCharsPerInch, ibm4312Prtx1InterpreterIPDSCharsPerInchMin, and ibm4312Pr… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.3 | ibm4312Prtx1InterpreterIPDSCharsPerInchMin | 0 | 0 | The minimum allowable value for ibm4312Prtx1InterpreterIPDSDefaultCharsPerInch. The units are specified in ibm4312Prtx1Interprete… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.4 | ibm4312Prtx1InterpreterIPDSCharsPerInchMax | 0 | 0 | The maximum allowable value for ibm4312Prtx1InterpreterIPDSDefaultCharsPerInch. The units are specified in ibm4312Prtx1Interprete… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.6 | ibm4312Prtx1InterpreterIPDSEdgeToEdge | 0 | 0 | Turns edge-to-edge printing off or on. off: the printer maintains a border of 4 mm on all four paper sides. on: the printer allo… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.7 | ibm4312Prtx1InterpreterIPDSEmulation | 0 | 0 | Specifies the printer to emulate. prt4312 should only be selected if the appropriate level of PSF software is installed. |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.8 | ibm4312Prtx1InterpreterIPDSEPC | 0 | 0 | Turns Early Print Completion (EPC) off or on for jobs sent over the twinax attachment. off: the printer waits until the j… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.9 | ibm4312Prtx1InterpreterIPDSFontSub | 0 | 0 | Turns font substitution off or on. |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.10 | ibm4312Prtx1InterpreterIPDSPage | 0 | 0 | See the 'IBM Network Printers: Twinax/Coax Configuration Guide' for a detailed description of the settings for this variable. |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.11 | ibm4312Prtx1InterpreterIPDSPort | 0 | 0 | The value of prtChannelIndex for the attachment used for IPDS jobs. Must specifiy Coax, Twinax, TokenRing, or Ethernet. A value… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.12 | ibm4312Prtx1InterpreterIPDSVPACheck | 0 | 0 | Turns Valid Printable Area (VPA) checking off or on. off: the printer does not report pels outside the valie printable area. on: … |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.13 | ibm4312Prtx1InterpreterIPDSXOffset | 0 | 0 | Sets the print offset in the X (horizontal direction. Positive values move the starting point for printing to the right on a por… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.14 | ibm4312Prtx1InterpreterIPDSXOffsetUnit | 0 | 0 | The unit of measure for ibm4312Prtx1InterpreterIPDSXOffset, ibm4312Prtx1InterpreterIPDSXOffsetMin, and ibm4312Prtx1InterpreterIPDS… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.15 | ibm4312Prtx1InterpreterIPDSXOffsetMin | 0 | 0 | The minimum allowable value for ibm4312Prtx1InterpreterIPDSXOffset. The unit is specified by ibm4312Prtx1InterpreterIPDSXOffsetUn… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.16 | ibm4312Prtx1InterpreterIPDSXOffsetMax | 0 | 0 | The maximum allowable value for ibm4312Prtx1InterpreterIPDSXOffset. The unit is specified by ibm4312Prtx1InterpreterIPDSXOffsetUn… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.17 | ibm4312Prtx1InterpreterIPDSYOffset | 0 | 0 | Sets the print offset in the Y (vertical) direction. Positive values move the starting print for printing toward the bottom of a… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.18 | ibm4312Prtx1InterpreterIPDSYOffsetUnit | 0 | 0 | The unit of measure for ibm4312Prtx1InterpreterIPDSYOffset, ibm4312Prtx1InterpreterIPDSYOffsetMin, and ibm4312Prtx1InterpreterIPDS… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.19 | ibm4312Prtx1InterpreterIPDSYOffsetMin | 0 | 0 | The minimum allowable value for ibm4312Prtx1InterpreterIPDSYOffset. The unit is specified by ibm4312Prtx1InterpreterIPDSYOffsetUn… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.20 | ibm4312Prtx1InterpreterIPDSYOffsetMax | 0 | 0 | The maximum allowable value for ibm4312Prtx1InterpreterIPDSYOffset. The unit is specified by ibm4312Prtx1InterpreterIPDSYOffsetUn… |
| 1.3.6.1.4.1.2.6.123.15.102.1.1.21 | ibm4312Prtx1InterpreterIPDSPageProtect | 0 | 0 | Sets page protection: on: the printer reserves enough memory to process an entire page without compression before it prints th… |