The current state of the corresponding hub's RMON probe.
When any of the RMON flags is set to enabled, this value
will read enabled(1).
When all of the RMON flags are disabled, this value
will read disabled(1).
Parsed from file ibm8239.mib.txt
Company: ibm
Module: IBM8239-MIB
Vendor: IBM
Module: IBM8239-MIB (ibm8239.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
mgmtIfRmonMode OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the corresponding hub's RMON probe. When any of the RMON flags is set to enabled, this value will read enabled(1). When all of the RMON flags are disabled, this value will read disabled(1)." ::= { mgmtIfEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.138.1.7.1.1.1 | mgmtIfHubId | 0 | 0 | ID number of the current hub. |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.2 | mgmtIfDefaultGateway | 0 | 0 | The current default gateway IP address of this hubs's token-ring management interface. WARNING - connectivity may be lost if th… |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.3 | mgmtIfIpAddr | 0 | 0 | The current IP address of this hubs's token-ring management interface. WARNING - connectivity may be lost if this setting is ch… |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.4 | mgmtIfSubnetMask | 0 | 0 | The current subnet mask of this hubs's token-ring management interface. WARNING - connectivity may be lost if this setting is c… |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.5 | mgmtIfBurnedinAddr | 0 | 0 | A 6 octet address burned-in (programmed at the factory) that uniquely identifies this hub. |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.6 | mgmtIfLocalAdminAddr | 0 | 0 | A MAC address with the locally administered bit set to one. Setting this value to an invalid address will return an error. An inv… |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.7 | mgmtIfMacAddrType | 0 | 0 | The desired MAC address for this agent. burned_in(1) indicates that the factory setting as defined in mgmtIfBurnedinAddr should … |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.8 | mgmtIfMode | 0 | 0 | The desired connectivity mode of the management interface for the corresponding hub-Id. When this value is set to enabled(1) the … |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.9 | mgmtIfEarlyTokenRel | 0 | 0 | Indicates wether Early Token Release is enabled for this hub's TR adapter. Early Token Release (ETR) is a function which allows … |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.10 | mgmtIfMonitorConten | 0 | 0 | Indicates wether this hub's TR adapter will participate in active monitor contention. |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.11 | mgmtIfArpResolveMethod | 0 | 0 | The desired ARP broadcast type for this card. When this attribute is set to source-route(1), all ARP requests will contain the … |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.12 | mgmtIfDiagnosticsWrap | 0 | 0 | The desired mode of wrapping for diagnostic tests. When this value is none(1) no diagnostics wraps will be performed. When this… |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.13 | mgmtIfTRSurrogateMode | 0 | 0 | mgmtIftRSurrogateMode |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.14 | mgmtIfDot5StatsMode | 0 | 0 | The desired IEEE 802.5 statistics mode of this hub. When the attribute is set to enabled(1), the hub will gather IEEE 802.5 stat… |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.16 | mgmtIfRmon2Mode | 0 | 0 | The desired RMON RMON2 statistics mode of this hub. When this attribute is set to rmon2Enabled(1), the probe will gather statis… |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.17 | mgmtIfRingSegmentNum | 0 | 0 | The local ring segment number. A value of zero means no ring segment number has been assigned. |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.18 | mgmtIfRpsTraps | 0 | 0 | The desired RPS Traps mode. If the value is set to enabled(1) RPS traps will be sent. If the value is set to disabled(2) no RP… |