Indicates wether Early Token Release is enabled for this
hub's TR adapter. Early Token Release (ETR) is a function
which allows a transmitting adapter to release a new token
as soon as it has completed frame transmission. This option
is only supported on 16Mbps Token Ring networks.
Parsed from file ibm8239.mib.txt
Company: ibm
Module: IBM8239-MIB
Vendor: IBM
Module: IBM8239-MIB (ibm8239.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
mgmtIfEarlyTokenRel OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates wether Early Token Release is enabled for this hub's TR adapter. Early Token Release (ETR) is a function which allows a transmitting adapter to release a new token as soon as it has completed frame transmission. This option is only supported on 16Mbps Token Ring networks." ::= { mgmtIfEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.138.1.7.1.1.1 | mgmtIfHubId | 0 | 0 | ID number of the current hub. |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.2 | mgmtIfDefaultGateway | 0 | 0 | The current default gateway IP address of this hubs's token-ring management interface. WARNING - connectivity may be lost if th… |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.3 | mgmtIfIpAddr | 0 | 0 | The current IP address of this hubs's token-ring management interface. WARNING - connectivity may be lost if this setting is ch… |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.4 | mgmtIfSubnetMask | 0 | 0 | The current subnet mask of this hubs's token-ring management interface. WARNING - connectivity may be lost if this setting is c… |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.5 | mgmtIfBurnedinAddr | 0 | 0 | A 6 octet address burned-in (programmed at the factory) that uniquely identifies this hub. |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.6 | mgmtIfLocalAdminAddr | 0 | 0 | A MAC address with the locally administered bit set to one. Setting this value to an invalid address will return an error. An inv… |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.7 | mgmtIfMacAddrType | 0 | 0 | The desired MAC address for this agent. burned_in(1) indicates that the factory setting as defined in mgmtIfBurnedinAddr should … |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.8 | mgmtIfMode | 0 | 0 | The desired connectivity mode of the management interface for the corresponding hub-Id. When this value is set to enabled(1) the … |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.10 | mgmtIfMonitorConten | 0 | 0 | Indicates wether this hub's TR adapter will participate in active monitor contention. |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.11 | mgmtIfArpResolveMethod | 0 | 0 | The desired ARP broadcast type for this card. When this attribute is set to source-route(1), all ARP requests will contain the … |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.12 | mgmtIfDiagnosticsWrap | 0 | 0 | The desired mode of wrapping for diagnostic tests. When this value is none(1) no diagnostics wraps will be performed. When this… |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.13 | mgmtIfTRSurrogateMode | 0 | 0 | mgmtIftRSurrogateMode |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.14 | mgmtIfDot5StatsMode | 0 | 0 | The desired IEEE 802.5 statistics mode of this hub. When the attribute is set to enabled(1), the hub will gather IEEE 802.5 stat… |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.15 | mgmtIfRmonMode | 0 | 0 | The current state of the corresponding hub's RMON probe. When any of the RMON flags is set to enabled, this value will read enabl… |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.16 | mgmtIfRmon2Mode | 0 | 0 | The desired RMON RMON2 statistics mode of this hub. When this attribute is set to rmon2Enabled(1), the probe will gather statis… |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.17 | mgmtIfRingSegmentNum | 0 | 0 | The local ring segment number. A value of zero means no ring segment number has been assigned. |
| 1.3.6.1.4.1.2.6.138.1.7.1.1.18 | mgmtIfRpsTraps | 0 | 0 | The desired RPS Traps mode. If the value is set to enabled(1) RPS traps will be sent. If the value is set to disabled(2) no RP… |