The front panel LEDs state of this group.
The front panel LEDs state will be represented as an octet string,
and will be sent in the following order:
octet[0] (OOB management),
octet[1] (Web-based management), and
octet[2] (SNMP management) :
1 -> supported, 0 -> not supported
octet[3] (Number of port available in this group)
octet[4] (Collision indicator):
where bit 0 (100M segment collision indicator)
bit 1 (10M segment collision indicator),
1 -> Collision detected, 0 -> no collision
octet[5] (10Mbps Segment utilization indicator),
octet[6] (100Mbps Segment utilization indicator):
The mapping between utilization and bit field will be:
bit : 0, 1, 2, 3, 4
utilization (%) : 1 5 10 20 50+
octet[7] (port 1 information)
...
octet[n] (port n information), where n is indicated by octet[3]:
bit 0 (port speed): 1 -> 100Mbps, 0 -> 10 Mbps
bit 1 (rx activity): 1 -> packet receiving, 0 -> packet not receiving
bit 2 (link status): 1 -> link up, 0 -> link down
bit 3 (admin status): 1 -> admin enabled, 0 -> admin disabled
bit 4 (auto partitioned): 1 -> partitioned, 0 -> not partitioned
bit 5 (isolated): 1 -> port isolated, 0 -> port not isolated.
Parsed from file IBM8245.MIB.txt
Company: ibm
Module: HUB8245-MIB
Vendor: IBM
Module: HUB8245-MIB (IBM8245.MIB)
Type: TABULAR
Access: read-only
Syntax: OCTET STRING
( SIZE (
0..128 ) )
Automatically extracted from www.mibdepot.com
hubGrpFPanelLedState OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "The front panel LEDs state of this group. The front panel LEDs state will be represented as an octet string, and will be sent in the following order: octet[0] (OOB management), octet[1] (Web-based management), and octet[2] (SNMP management) : 1 -> supported, 0 -> not supported octet[3] (Number of port available in this group) octet[4] (Collision indicator): where bit 0 (100M segment collision indicator) bit 1 (10M segment collision indicator), 1 -> Collision detected, 0 -> no collision octet[5] (10Mbps Segment utilization indicator), octet[6] (100Mbps Segment utilization indicator): The mapping between utilization and bit field will be: bit : 0, 1, 2, 3, 4 utilization (%) : 1 5 10 20 50+ octet[7] (port 1 information) ... octet[n] (port n information), where n is indicated by octet[3]: bit 0 (port speed): 1 -> 100Mbps, 0 -> 10 Mbps bit 1 (rx activity): 1 -> packet receiving, 0 -> packet not receiving bit 2 (link status): 1 -> link up, 0 -> link down bit 3 (admin status): 1 -> admin enabled, 0 -> admin disabled bit 4 (auto partitioned): 1 -> partitioned, 0 -> not partitioned bit 5 (isolated): 1 -> port isolated, 0 -> port not isolated. " ::= { hubGrpEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.1 | hubGrpIndex | 0 | 0 | This object identifies the group within the system for which this entry contains information. |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.2 | hubGrpDescr | 0 | 0 | A textual description (ASCII characters) regarding the characteristics of this group. |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.3 | hubGrpPortCapacity | 0 | 0 | The maximum number of ports contained in this group. Within each group, the ports are uniquely numbered in the range from 1 to hu… |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.4 | hubGrpRptrType | 0 | 0 | The repeater type of this group. |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.5 | hubGrpRole | 0 | 0 | The role of this group. |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.6 | hubGrpHwRev | 0 | 0 | The hub base board h/w version in the form of 'Ver WWW Rel XXX Mod YYY PTF ZZZ' format, where the WWW, XXX, YYY, and ZZZ is 'V… |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.7 | hubGrpSerialNum | 0 | 0 | The device serial number of this group. This group serial number is used as an identifier to initiate the group operation during … |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.8 | hubGrpLastChange | 0 | 0 | The value of sysUpTime when any of the following conditions occurred: 1) agent cold- or warm-started; 2) this instance of group wa… |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.9 | hubGrpPartitionedPorts | 0 | 0 | This object returns the total number of ports in the repeater whose current state meets all three of the following criteria: rpt… |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.11 | hubGrpOperStatus | 0 | 0 | Indicate the current status of this group. |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.12 | hubGrpAdminState | 0 | 0 | The object enables/disables the specific group to administrate the 10/100Mbps segment, that means the specific group will be iso… |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.13 | hubGrpReset | 0 | 0 | This object provides the capability to reset the operation of specified group. Setting this object to no-reset(1) has no effect. T… |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.14 | hubGrpLastChangeNotify | 0 | 0 | If this object was in enabled(1) state, the hubGrpLastChangeTrap trap will be raised by the agent whenever the value of hubGrpLas… |