If this object was in enabled(1) state, the hubGrpLastChangeTrap
trap will be raised by the agent whenever the value of
hubGrpLastChange is changed due to the following conditions:
4) ports were added or removed as members of
the group (such as group admin enabled/disabled); or
5) any of the counters associated with this
group had a discontinuity (such as, reset group counters).
This object is set to disabled(2) state by default.
Parsed from file IBM8245.MIB.txt
Company: ibm
Module: HUB8245-MIB
Vendor: IBM
Module: HUB8245-MIB (IBM8245.MIB)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
hubGrpLastChangeNotify OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If this object was in enabled(1) state, the hubGrpLastChangeTrap trap will be raised by the agent whenever the value of hubGrpLastChange is changed due to the following conditions: 4) ports were added or removed as members of the group (such as group admin enabled/disabled); or 5) any of the counters associated with this group had a discontinuity (such as, reset group counters). This object is set to disabled(2) state by default." ::= { hubGrpEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.1 | hubGrpIndex | 0 | 0 | This object identifies the group within the system for which this entry contains information. |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.2 | hubGrpDescr | 0 | 0 | A textual description (ASCII characters) regarding the characteristics of this group. |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.3 | hubGrpPortCapacity | 0 | 0 | The maximum number of ports contained in this group. Within each group, the ports are uniquely numbered in the range from 1 to hu… |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.4 | hubGrpRptrType | 0 | 0 | The repeater type of this group. |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.5 | hubGrpRole | 0 | 0 | The role of this group. |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.6 | hubGrpHwRev | 0 | 0 | The hub base board h/w version in the form of 'Ver WWW Rel XXX Mod YYY PTF ZZZ' format, where the WWW, XXX, YYY, and ZZZ is 'V… |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.7 | hubGrpSerialNum | 0 | 0 | The device serial number of this group. This group serial number is used as an identifier to initiate the group operation during … |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.8 | hubGrpLastChange | 0 | 0 | The value of sysUpTime when any of the following conditions occurred: 1) agent cold- or warm-started; 2) this instance of group wa… |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.9 | hubGrpPartitionedPorts | 0 | 0 | This object returns the total number of ports in the repeater whose current state meets all three of the following criteria: rpt… |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.10 | hubGrpFPanelLedState | 0 | 0 | The front panel LEDs state of this group. The front panel LEDs state will be represented as an octet string, and will be sent in … |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.11 | hubGrpOperStatus | 0 | 0 | Indicate the current status of this group. |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.12 | hubGrpAdminState | 0 | 0 | The object enables/disables the specific group to administrate the 10/100Mbps segment, that means the specific group will be iso… |
| 1.3.6.1.4.1.2.6.147.2.1.1.1.1.1.1.13 | hubGrpReset | 0 | 0 | This object provides the capability to reset the operation of specified group. Setting this object to no-reset(1) has no effect. T… |