The switch port's actual status.
This object indicates the switch port's operational
status. The notPresent(3) status indicates the
port is physically removed (note this may or may
not be possible depending on the type of port.)
The operational(1) status indicates that the port
is enabled (see sw2PortCfgAdminState) and working,
even though it might be auto-partitioned (see
sw2PortCfgAutoPartitionStatus).
If this object has the value operational(1) and
sw2PortCfgAdminState is set to disabled(2), it is
expected that this object's value will soon change
to notOperational(2).
Parsed from file ibm8275-2xx.mib.txt
Company: ibm
Module: IBM8275-2XX-MIB
Vendor: IBM
Module: IBM8275-2XX-MIB (ibm8275-2xx.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
sw2PortCfgPortStatus OBJECT-TYPE SYNTAX INTEGER { operational(1), notOperational(2), notPresent(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The switch port's actual status. This object indicates the switch port's operational status. The notPresent(3) status indicates the port is physically removed (note this may or may not be possible depending on the type of port.) The operational(1) status indicates that the port is enabled (see sw2PortCfgAdminState) and working, even though it might be auto-partitioned (see sw2PortCfgAutoPartitionStatus). If this object has the value operational(1) and sw2PortCfgAdminState is set to disabled(2), it is expected that this object's value will soon change to notOperational(2)." ::= { sw2PortCfgTblEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.156.1.3.1.1.1 | sw2PortCfgIndex | 0 | 0 | A unique value to identify each switch port. |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.2 | sw2PortCfgPortIfType | 0 | 0 | sw2PortCfgPortIftype |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.3 | sw2PortCfgPortName | 0 | 0 | A user definable name for this port. |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.4 | sw2PortCfgXmitPacing | 0 | 0 | Transmit pacing enabled(2) introduces delays into the normal transmission of frames which delays attempts between stations. This … |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.5 | sw2PortCfgPortSpeedCapability | 0 | 0 | The speed capability that is supported by this switch port. |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.6 | sw2PortCfgSpeedAndDuplexMode | 0 | 0 | Set the speed and duplex mode of switch port. |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.7 | sw2PortCfgCurSpeedAndDuplex | 0 | 0 | The working speed and the duplex mode between the connected station and the switch port. |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.8 | sw2PortCfgAdminState | 0 | 0 | Specifies whether the switch port is enabled(2) or disabled(3). If the port is in disabled(3) state, frames are not transmitted t… |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.9 | sw2PortCfgAutoPartitionStatus | 0 | 0 | The status indicates whether this switch port is currently partitioned by the switch's broadcast storming protection function. |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.10 | sw2PortCfgAutoPartitionReason | 0 | 0 | The priority level is broadcast-storm(2) > self-loop(3) > stp(4), If multiple reasons exists, this object shows the most prioritiz… |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.12 | sw2PortCfgLinkStatus | 0 | 0 | The link integrity status. |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.13 | sw2PortLongFrameHandling | 0 | 0 | This object selects the per port counter etherStatsPkts1024to1518Octets (RMON ether statistics) statistics counter to either reco… |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.14 | sw2PortDefaultVLANId | 0 | 0 | The VLAN ID assigned to untagged frames or Prority-Tagged frames received on this port. |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.15 | sw2PortGvrpStatus | 0 | 0 | The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as sw2VlanGv… |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.16 | sw2PortConnectionType | 0 | 0 | To specify what kind of devices will be connected to this port. 1. access-link : all the devices attached to this port will be re… |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.17 | sw2PortJoinStpStatus | 0 | 0 | When a port of this attribute was set as 'enabled(1). It will behave as 802.1D (STP) said. (i.e. it will be in one of the Blockin… |