Specifies whether the switch port is enabled(2) or disabled(3).
If the port is in disabled(3) state, frames are not transmitted
to or received from the port.
Parsed from file ibm8275-2xx.mib.txt
Company: ibm
Module: IBM8275-2XX-MIB
Vendor: IBM
Module: IBM8275-2XX-MIB (ibm8275-2xx.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
sw2PortCfgAdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies whether the switch port is enabled(2) or disabled(3). If the port is in disabled(3) state, frames are not transmitted to or received from the port." ::= { sw2PortCfgTblEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.156.1.3.1.1.1 | sw2PortCfgIndex | 0 | 0 | A unique value to identify each switch port. |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.2 | sw2PortCfgPortIfType | 0 | 0 | sw2PortCfgPortIftype |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.3 | sw2PortCfgPortName | 0 | 0 | A user definable name for this port. |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.4 | sw2PortCfgXmitPacing | 0 | 0 | Transmit pacing enabled(2) introduces delays into the normal transmission of frames which delays attempts between stations. This … |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.5 | sw2PortCfgPortSpeedCapability | 0 | 0 | The speed capability that is supported by this switch port. |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.6 | sw2PortCfgSpeedAndDuplexMode | 0 | 0 | Set the speed and duplex mode of switch port. |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.7 | sw2PortCfgCurSpeedAndDuplex | 0 | 0 | The working speed and the duplex mode between the connected station and the switch port. |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.9 | sw2PortCfgAutoPartitionStatus | 0 | 0 | The status indicates whether this switch port is currently partitioned by the switch's broadcast storming protection function. |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.10 | sw2PortCfgAutoPartitionReason | 0 | 0 | The priority level is broadcast-storm(2) > self-loop(3) > stp(4), If multiple reasons exists, this object shows the most prioritiz… |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.11 | sw2PortCfgPortStatus | 0 | 0 | The switch port's actual status. This object indicates the switch port's operational status. The notPresent(3) status indicates … |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.12 | sw2PortCfgLinkStatus | 0 | 0 | The link integrity status. |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.13 | sw2PortLongFrameHandling | 0 | 0 | This object selects the per port counter etherStatsPkts1024to1518Octets (RMON ether statistics) statistics counter to either reco… |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.14 | sw2PortDefaultVLANId | 0 | 0 | The VLAN ID assigned to untagged frames or Prority-Tagged frames received on this port. |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.15 | sw2PortGvrpStatus | 0 | 0 | The state of GVRP operation on this port. The value enabled(1) indicates that GVRP is enabled on this port, as long as sw2VlanGv… |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.16 | sw2PortConnectionType | 0 | 0 | To specify what kind of devices will be connected to this port. 1. access-link : all the devices attached to this port will be re… |
| 1.3.6.1.4.1.2.6.156.1.3.1.1.17 | sw2PortJoinStpStatus | 0 | 0 | When a port of this attribute was set as 'enabled(1). It will behave as 802.1D (STP) said. (i.e. it will be in one of the Blockin… |