This object specifies whether the ATM code has been loaded
on to the adapter. The configRejected state indicates
that the ATM configuration file download via OSA/SF has
been found to be incorrect. The outOfSync condition
indicates that the OSA firmware and the ATM code both
running on the OSA have been found to be at incompatible
levels. Any state other than operational infers that
the data associated with a port may be incorrect.
Note: OSA/SF should only report states operational
and notOperational. This object is only valid for
ATM OSA-2 adapters. For other ATM adapters the value
is notApplicable.
Parsed from file mvstcpip.mi2.txt
Company: None
Module: IBMTCPIPMVS-MIB
This object specifies whether the ATM code has been loaded
on to the adapter. The configRejected state indicates
that the ATM configuration file download via OSA/SF has
been found to be incorrect. The outOfSync condition
indicates that the OSA firmware and the ATM code both
running on the OSA have been found to be at incompatible
levels. Any state other than operational infers that
the data associated with a port may be incorrect.
Note: OSA/SF should only report states operational
and notOperational. This object is only valid for
ATM OSA-2 adapters. For other ATM adapters the value
is notApplicable.
Parsed from file IBMTCPIPMVS-MIB.mib
Module: IBMTCPIPMVS-MIB
Vendor: IBM
Module: IBMTCPIPMVS-MIB
[Automatically extracted from oidview.com]
ibmMvsAtmOsasfPortCodeLoadStatus OBJECT-TYPE SYNTAX INTEGER { operational(1), notOperational(2), configRejected(3), outOfSync(4), notApplicable(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies whether the ATM code has been loaded on to the adapter. The configRejected state indicates that the ATM configuration file download via OSA/SF has been found to be incorrect. The outOfSync condition indicates that the OSA firmware and the ATM code both running on the OSA have been found to be at incompatible levels. Any state other than operational infers that the data associated with a port may be incorrect. Note: OSA/SF should only report states operational and notOperational. This object is only valid for ATM OSA-2 adapters. For other ATM adapters the value is notApplicable." ::= { osasfPortEntry 10 }
ibmMvsAtmOsasfPortCodeLoadStatus OBJECT-TYPE SYNTAX INTEGER { operational(1), notOperational(2), configRejected(3), outOfSync(4), notApplicable(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies whether the ATM code has been loaded on to the adapter. The configRejected state indicates that the ATM configuration file download via OSA/SF has been found to be incorrect. The outOfSync condition indicates that the OSA firmware and the ATM code both running on the OSA have been found to be at incompatible levels. Any state other than operational infers that the data associated with a port may be incorrect. Note: OSA/SF should only report states operational and notOperational. This object is only valid for ATM OSA-2 adapters. For other ATM adapters the value is notApplicable." ::= { osasfPortEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.1 | ibmMvsAtmOsasfPortNumber | 0 | 0 | Port number, starts at 0. |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.2 | ibmMvsAtmOsasfPortType | 0 | 0 | For an ATM OSA-2 adapter configured for ATM native traffic, the value of this object is atm(9). For an ATM OSA-2 adapter configu… |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.3 | ibmMvsAtmOsasfPortHardwareState | 0 | 0 | The hardware state value ranges from 0 to 6 as follows: 0 - enable 1 - disabled from host 2 - disabled from external source 3 - dis… |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.4 | ibmMvsAtmOsasfPortMediaType | 0 | 0 | ILMI atmfPortMediaType equivalent. OSA supports types 2 and 3 |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.5 | ibmMvsAtmOsasfPortUniType | 0 | 0 | ILMI atmfAtmLayerUniType. OSA supports only 2 |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.6 | ibmMvsAtmOsasfPortUniVersion | 0 | 0 | ILMI atmfAtmLayerUniVersion. OSA supports only 3. This is the highest UNI version supported. |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.7 | ibmMvsAtmOsasfPortNetPrefix | 0 | 0 | A unique value which identifies the UNI port for which the network prefix for ATM addresses is in effect. The value of 0 has the … |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.8 | ibmMvsAtmOsasfPortNetPrefixPrefix | 0 | 0 | The network prefix for ATM addresses which is in effect on the user-side of the ATM UNIT port. Network prefix is defined as the A… |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.9 | ibmMvsAtmOsasfPortNetPrefixStatus | 0 | 0 | Equivalent to the atmfNetPrefixStatus as defined in the Network Prefix Table in the ILMI Address Registration MIB. An indication … |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.11 | ibmMvsAtmOsasfPortMacAddrBurntIn | 0 | 0 | A 6 byte OCTET STRING which contains the adapter's burned in MAC address. Does not apply to ATM OSA-2 device configured for ATM … |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.12 | ibmMvsAtmOsasfPortMacAddrActive | 0 | 0 | A 6 byte OCTET STRING which contains the current MAC address in use on the adapter. Does not apply to ATM OSA-2 device configure… |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.13 | ibmMvsAtmOsasfPortMaxPcmConnections | 0 | 0 | Specifies the maximum number of connects on an OSA port which can be used for ATM exploitation purposes. It can range from 0 to t… |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.14 | ibmMvsAtmOsasfPortPcmName | 0 | 0 | Specifies the Port Name which must also be entered at the connection manager on the host and the application. Port Name is specif… |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.15 | ibmMvsAtmOsasfPortAAL5InPackets | 0 | 0 | inbound packets at the corresponding AAL5 interface layer. |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.16 | ibmMvsAtmOsasfPortAAL5OutPackets | 0 | 0 | outbound packets at the corresponding AAL5 interface layer. |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.17 | ibmMvsAtmOsasfPortIpAddress | 0 | 0 | The managing IpAddress reported by the ATM port as its atmfMyIpNmAddress as specified by the ATM Forum User-NetworkInterface (UNI… |