The managing IpAddress reported by the ATM port as
its atmfMyIpNmAddress as specified by the ATM Forum
User-NetworkInterface (UNI) specification. An SNMP Set
for this object is only supported for OSA-2 ATM adapters.
If the values for objects
ibmMvsAtmOsasfChannelCurLparName/Num are not the same as
values for objects ibmMvsAtmOsasfChannelManParnName/Num
then the OSA/SF running in the current LPAR is not the
managing OSA/SF for this adapter.
SNMP Set commands for ibmMvsAtmOsasfPortIpAddress
(to set an IP address at the ATM port) will be rejected
by OSA/SF if the OSA/SF in the current LPAR is not the
managing OSA/SF for the adapter.
Parsed from file mvstcpip.mi2.txt
Company: None
Module: IBMTCPIPMVS-MIB
The managing IpAddress reported by the ATM port as
its atmfMyIpNmAddress as specified by the ATM Forum
User-NetworkInterface (UNI) specification. An SNMP Set
for this object is only supported for OSA-2 ATM adapters.
If the values for objects
ibmMvsAtmOsasfChannelCurLparName/Num are not the same as
values for objects ibmMvsAtmOsasfChannelManParnName/Num
then the OSA/SF running in the current LPAR is not the
managing OSA/SF for this adapter.
SNMP Set commands for ibmMvsAtmOsasfPortIpAddress
(to set an IP address at the ATM port) will be rejected
by OSA/SF if the OSA/SF in the current LPAR is not the
managing OSA/SF for the adapter.
Parsed from file IBMTCPIPMVS-MIB.mib
Module: IBMTCPIPMVS-MIB
Vendor: IBM
Module: IBMTCPIPMVS-MIB
[Automatically extracted from oidview.com]
ibmMvsAtmOsasfPortIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The managing IpAddress reported by the ATM port as its atmfMyIpNmAddress as specified by the ATM Forum User-NetworkInterface (UNI) specification. An SNMP Set for this object is only supported for OSA-2 ATM adapters. If the values for objects ibmMvsAtmOsasfChannelCurLparName/Num are not the same as values for objects ibmMvsAtmOsasfChannelManParnName/Num then the OSA/SF running in the current LPAR is not the managing OSA/SF for this adapter. SNMP Set commands for ibmMvsAtmOsasfPortIpAddress (to set an IP address at the ATM port) will be rejected by OSA/SF if the OSA/SF in the current LPAR is not the managing OSA/SF for the adapter." ::= { osasfPortEntry 17 }
ibmMvsAtmOsasfPortIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The managing IpAddress reported by the ATM port as its atmfMyIpNmAddress as specified by the ATM Forum User-NetworkInterface (UNI) specification. An SNMP Set for this object is only supported for OSA-2 ATM adapters. If the values for objects ibmMvsAtmOsasfChannelCurLparName/Num are not the same as values for objects ibmMvsAtmOsasfChannelManParnName/Num then the OSA/SF running in the current LPAR is not the managing OSA/SF for this adapter. SNMP Set commands for ibmMvsAtmOsasfPortIpAddress (to set an IP address at the ATM port) will be rejected by OSA/SF if the OSA/SF in the current LPAR is not the managing OSA/SF for the adapter." ::= { osasfPortEntry 17 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.1 | ibmMvsAtmOsasfPortNumber | 0 | 0 | Port number, starts at 0. |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.2 | ibmMvsAtmOsasfPortType | 0 | 0 | For an ATM OSA-2 adapter configured for ATM native traffic, the value of this object is atm(9). For an ATM OSA-2 adapter configu… |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.3 | ibmMvsAtmOsasfPortHardwareState | 0 | 0 | The hardware state value ranges from 0 to 6 as follows: 0 - enable 1 - disabled from host 2 - disabled from external source 3 - dis… |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.4 | ibmMvsAtmOsasfPortMediaType | 0 | 0 | ILMI atmfPortMediaType equivalent. OSA supports types 2 and 3 |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.5 | ibmMvsAtmOsasfPortUniType | 0 | 0 | ILMI atmfAtmLayerUniType. OSA supports only 2 |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.6 | ibmMvsAtmOsasfPortUniVersion | 0 | 0 | ILMI atmfAtmLayerUniVersion. OSA supports only 3. This is the highest UNI version supported. |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.7 | ibmMvsAtmOsasfPortNetPrefix | 0 | 0 | A unique value which identifies the UNI port for which the network prefix for ATM addresses is in effect. The value of 0 has the … |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.8 | ibmMvsAtmOsasfPortNetPrefixPrefix | 0 | 0 | The network prefix for ATM addresses which is in effect on the user-side of the ATM UNIT port. Network prefix is defined as the A… |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.9 | ibmMvsAtmOsasfPortNetPrefixStatus | 0 | 0 | Equivalent to the atmfNetPrefixStatus as defined in the Network Prefix Table in the ILMI Address Registration MIB. An indication … |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.10 | ibmMvsAtmOsasfPortCodeLoadStatus | 0 | 0 | This object specifies whether the ATM code has been loaded on to the adapter. The configRejected state indicates that the ATM con… |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.11 | ibmMvsAtmOsasfPortMacAddrBurntIn | 0 | 0 | A 6 byte OCTET STRING which contains the adapter's burned in MAC address. Does not apply to ATM OSA-2 device configured for ATM … |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.12 | ibmMvsAtmOsasfPortMacAddrActive | 0 | 0 | A 6 byte OCTET STRING which contains the current MAC address in use on the adapter. Does not apply to ATM OSA-2 device configure… |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.13 | ibmMvsAtmOsasfPortMaxPcmConnections | 0 | 0 | Specifies the maximum number of connects on an OSA port which can be used for ATM exploitation purposes. It can range from 0 to t… |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.14 | ibmMvsAtmOsasfPortPcmName | 0 | 0 | Specifies the Port Name which must also be entered at the connection manager on the host and the application. Port Name is specif… |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.15 | ibmMvsAtmOsasfPortAAL5InPackets | 0 | 0 | inbound packets at the corresponding AAL5 interface layer. |
| 1.3.6.1.4.1.2.6.19.2.2.6.2.1.16 | ibmMvsAtmOsasfPortAAL5OutPackets | 0 | 0 | outbound packets at the corresponding AAL5 interface layer. |