Backward cell burst size specified as number of cells.
If the best effort indicator is on, the value of this
object is ignored. Otherwise (for a reserved bandwidth
PVC) this value is utilized by OSA. A value of 0xFF
indicates that this value is not being used.
Backward cell burst size specifies the maximum number of
cells that can be received in the inbound direction at
the peak cell rate while maintaining conformance to the
PVC traffic contract.
Parsed from file mvstcpip.mi2.txt
Company: None
Module: IBMTCPIPMVS-MIB
Backward cell burst size specified as number of cells.
If the best effort indicator is on, the value of this
object is ignored. Otherwise (for a reserved bandwidth
PVC) this value is utilized by OSA. A value of 0xFF
indicates that this value is not being used.
Backward cell burst size specifies the maximum number of
cells that can be received in the inbound direction at
the peak cell rate while maintaining conformance to the
PVC traffic contract.
Parsed from file IBMTCPIPMVS-MIB.mib
Module: IBMTCPIPMVS-MIB
Vendor: IBM
Module: IBMTCPIPMVS-MIB
[Automatically extracted from oidview.com]
ibmMvsAtmOsasfPvcBwdCellBurstSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Backward cell burst size specified as number of cells. If the best effort indicator is on, the value of this object is ignored. Otherwise (for a reserved bandwidth PVC) this value is utilized by OSA. A value of 0xFF indicates that this value is not being used. Backward cell burst size specifies the maximum number of cells that can be received in the inbound direction at the peak cell rate while maintaining conformance to the PVC traffic contract." ::= { osasfPvcEntry 8 }
ibmMvsAtmOsasfPvcBwdCellBurstSize OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Backward cell burst size specified as number of cells. If the best effort indicator is on, the value of this object is ignored. Otherwise (for a reserved bandwidth PVC) this value is utilized by OSA. A value of 0xFF indicates that this value is not being used. Backward cell burst size specifies the maximum number of cells that can be received in the inbound direction at the peak cell rate while maintaining conformance to the PVC traffic contract." ::= { osasfPvcEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.1 | ibmMvsAtmOsasfPvcName | 0 | 0 | PVC Name |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.2 | ibmMvsAtmOsasfPvcBestEffort | 0 | 0 | Best Effort rate. 0 indicated that best effort delivery is not desired. 1 indicates that best effort delivery is desired. |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.3 | ibmMvsAtmOsasfPvcFwdPeakCellRate | 0 | 0 | Forward peak cell rate specified as cells per second. Needed in order to set up either a best effort or a reserved bandwidth PVC.… |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.4 | ibmMvsAtmOsasfPvcBwdPeakCellRate | 0 | 0 | Backward peak cell rate specified as cells per second. Needed in order to set up either a best effort or a reserved bandwidth PVC… |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.5 | ibmMvsAtmOsasfPvcFwdsustainCellRate | 0 | 0 | Forward sustain cell rate specified as cells per second. If the best effort indicator is on, the value of this object is ignored.… |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.6 | ibmMvsAtmOsasfPvcBwdsustainCellRate | 0 | 0 | Backward sustain cell rate specified as cells per second. If the best effort indicator is on, the value of this object is ignored… |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.7 | ibmMvsAtmOsasfPvcFwdCellBurstSize | 0 | 0 | Forward cell burst size specified as number of cells. If the best effort indicator is on, the value of this object is ignored. Ot… |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.9 | ibmMvsAtmOsasfPvcVpi | 0 | 0 | vpi for this PVC |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.10 | ibmMvsAtmOsasfPvcVci | 0 | 0 | vci for this PVC. This value must be greater than or equal to 32 since the first 32 vci code points have been reserved by the ATM… |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.11 | ibmMvsAtmOsasfPvcFwdMaxAal5PduSize | 0 | 0 | This field is used to setup the PVC. Units are in OCTETs and represents the largest PDU size for the AAL5 CPCS layer that can be … |
| 1.3.6.1.4.1.2.6.19.2.2.6.3.1.12 | ibmMvsAtmOsasfPvcBwdMaxAal5PduSize | 0 | 0 | This field is used to setup the PVC. Units are in OCTETs and represents the largest PDU size for the AAL5 CPCS layer that can be … |