This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.
Parsed from file ibm-rxr-mib.txt
Company: ibm
Module: IBM-RXR-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
rxr1dStpHoldTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second." REFERENCE "P802.1d/D9, July 14, 1989: Section 4.5.3.14" ::= { rxr1dStp 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.26.1.2.10.0 | rxr1dStpHoldTime | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.26.1.2.1 | rxr1dStpProtocolSpecification | 1 | 1 | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 10… |
| 1.3.6.1.4.1.2.6.26.1.2.2 | rxr1dStpPriority | 1 | 1 | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (las… |
| 1.3.6.1.4.1.2.6.26.1.2.3 | rxr1dStpTimeSinceTopologyChange | 1 | 1 | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.2.6.26.1.2.4 | rxr1dStpTopChanges | 1 | 1 | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.2.6.26.1.2.5 | rxr1dStpDesignatedRoot | 1 | 1 | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. Thi… |
| 1.3.6.1.4.1.2.6.26.1.2.6 | rxr1dStpRootCost | 1 | 1 | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.2.6.26.1.2.7 | rxr1dStpRootPort | 1 | 1 | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.2.6.26.1.2.8 | rxr1dStpMaxAge | 1 | 1 | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hu… |
| 1.3.6.1.4.1.2.6.26.1.2.9 | rxr1dStpHelloTime | 1 | 1 | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the span… |
| 1.3.6.1.4.1.2.6.26.1.2.11 | rxr1dStpForwardDelay | 1 | 1 | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving tow… |
| 1.3.6.1.4.1.2.6.26.1.2.12 | rxr1dStpBridgeMaxAge | 1 | 1 | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1d/D9 specifies that the range f… |
| 1.3.6.1.4.1.2.6.26.1.2.13 | rxr1dStpBridgeHelloTime | 1 | 1 | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified … |
| 1.3.6.1.4.1.2.6.26.1.2.14 | rxr1dStpBridgeForwardDelay | 1 | 1 | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1d/D9 specifies that the r… |
| 1.3.6.1.4.1.2.6.26.1.2.15 | rxr1dStpPortTable | 1 | 11 | A table that contains port-specific information for the Spanning Tree Protocol. |