The value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the value of
rxr1dBaseBridgeAddress.
Parsed from file ibm-rxr-mib.txt
Company: ibm
Module: IBM-RXR-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
rxr1dStpPriority OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of rxr1dBaseBridgeAddress." REFERENCE "P802.1d/D9, July 14, 1989: Section 4.5.3.7" ::= { rxr1dStp 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.26.1.2.2.0 | rxr1dStpPriority | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.26.1.2.1 | rxr1dStpProtocolSpecification | 1 | 1 | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 10… |
| 1.3.6.1.4.1.2.6.26.1.2.3 | rxr1dStpTimeSinceTopologyChange | 1 | 1 | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.2.6.26.1.2.4 | rxr1dStpTopChanges | 1 | 1 | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.2.6.26.1.2.5 | rxr1dStpDesignatedRoot | 1 | 1 | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. Thi… |
| 1.3.6.1.4.1.2.6.26.1.2.6 | rxr1dStpRootCost | 1 | 1 | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.2.6.26.1.2.7 | rxr1dStpRootPort | 1 | 1 | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.2.6.26.1.2.8 | rxr1dStpMaxAge | 1 | 1 | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hu… |
| 1.3.6.1.4.1.2.6.26.1.2.9 | rxr1dStpHelloTime | 1 | 1 | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the span… |
| 1.3.6.1.4.1.2.6.26.1.2.10 | rxr1dStpHoldTime | 1 | 1 | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by th… |
| 1.3.6.1.4.1.2.6.26.1.2.11 | rxr1dStpForwardDelay | 1 | 1 | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving tow… |
| 1.3.6.1.4.1.2.6.26.1.2.12 | rxr1dStpBridgeMaxAge | 1 | 1 | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1d/D9 specifies that the range f… |
| 1.3.6.1.4.1.2.6.26.1.2.13 | rxr1dStpBridgeHelloTime | 1 | 1 | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified … |
| 1.3.6.1.4.1.2.6.26.1.2.14 | rxr1dStpBridgeForwardDelay | 1 | 1 | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1d/D9 specifies that the r… |
| 1.3.6.1.4.1.2.6.26.1.2.15 | rxr1dStpPortTable | 1 | 11 | A table that contains port-specific information for the Spanning Tree Protocol. |