This object defines the order in which
inbound filters are applied on a particular
bridge port.
The following filter types are represented by the associated
numerical value and are appropriate for transparent bridges:
MAC Address 0x02
Ethernet Type 0x05
SSAP 0x06
The following filter types are represented by the associated
numerical value and are appropriate for source-route bridges:
Hop Count 0x01
MAC Address 0x02
Ring Number 0x03
SNAP 0x04
SSAP 0x06
The remaining bytes not used to specify a filter type should
be zeros.
The agent will not prevent a filter type from appearing more
than once in the filter order octet string. In this situation,
the filtering process will be applied twice for that filter type.
This is a benign, but useless, situation, so it should be avoided.
Parsed from file IBM8281.MIB.txt
Company: ibm
Module: ATM-BRIDGE-MIB
Vendor: IBM
Module: ATM-BRIDGE-MIB (IBM8281.MIB)
Type: TABULAR
Access: read-write
Syntax: OCTET STRING
( SIZE (
5 ) )
Automatically extracted from www.mibdepot.com
atmBrUsrFilterInOrder OBJECT-TYPE SYNTAX OCTET STRING (SIZE(5)) ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the order in which inbound filters are applied on a particular bridge port. The following filter types are represented by the associated numerical value and are appropriate for transparent bridges: MAC Address 0x02 Ethernet Type 0x05 SSAP 0x06 The following filter types are represented by the associated numerical value and are appropriate for source-route bridges: Hop Count 0x01 MAC Address 0x02 Ring Number 0x03 SNAP 0x04 SSAP 0x06 The remaining bytes not used to specify a filter type should be zeros. The agent will not prevent a filter type from appearing more than once in the filter order octet string. In this situation, the filtering process will be applied twice for that filter type. This is a benign, but useless, situation, so it should be avoided." ::= { atmBrUsrFilterInEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.28.4.1.1.1 | atmBrUsrFilterInPort | 0 | 0 | This object reflects the Bridging port that this row provides information about. |
| 1.3.6.1.4.1.2.6.28.4.1.1.3 | atmBrUsrFilterInSSapPermitDeny | 0 | 0 | This object defines the Source Service Access Point (SSAP) filter type applicable to this bridge port and the filters prescribed b… |
| 1.3.6.1.4.1.2.6.28.4.1.1.4 | atmBrUsrFilterInSnapPermitDeny | 0 | 0 | This object defines the Subnetwork Access Protocol (SNAP) filter type applicable to this bridge port and the filters prescribed by… |
| 1.3.6.1.4.1.2.6.28.4.1.1.5 | atmBrUsrFilterInMacPermitDeny | 0 | 0 | This object defines the MAC address filter type applicable to this bridge port and the filters prescribed by atmBrUsrFilterInMacT… |
| 1.3.6.1.4.1.2.6.28.4.1.1.6 | atmBrUsrFilterInRingNumPermitDeny | 0 | 0 | This object defines the Ring Number filter type applicable to this bridge port and the filters prescribed by atmBrUsrFilterInRingN… |
| 1.3.6.1.4.1.2.6.28.4.1.1.7 | atmBrUsrFilterInEtherTypePermitDeny | 0 | 0 | This object defines the Ethernet Type filter type applicable to this bridge port and the filters prescribed by atmBrUsrFilterInEth… |
| 1.3.6.1.4.1.2.6.28.4.1.1.8 | atmBrUsrFilterInSSapFrameType | 0 | 0 | This object defines the type of frame to which the Source Service Access Point (SSAP) filter(s) in atmBrUsrFilterInSSapTable will… |
| 1.3.6.1.4.1.2.6.28.4.1.1.9 | atmBrUsrFilterInSnapFrameType | 0 | 0 | This object defines the type of frame to which the Subnet Access Protocol (SNAP) filter(s) in atmBrUsrFilterInSnapTable will be a… |
| 1.3.6.1.4.1.2.6.28.4.1.1.10 | atmBrUsrFilterInMacFrameType | 0 | 0 | This object defines the type of frame to which the MAC address filter(s) in atmBrUsrFilterInMacTable will be applied. srb(1) … |
| 1.3.6.1.4.1.2.6.28.4.1.1.11 | atmBrUsrFilterInRingNumFrameType | 0 | 0 | This object defines the type of frame to which the Ring Number filter(s) in atmBrUsrFilterInRingNumberTable will be applied. srb(1… |