The Vpi value which, with the Vci value specified in
atmSaalConfSiVci, defines the signalling channel for this
entry.
Usually, there is one signalling channel per interface
defined by Vpi=0,Vci=5.
Parsed from file atmmib21.mib.txt
Company: ibm
Module: ATM-SWITCHING-NODE-MIB
Vendor: IBM
Module: ATM-SWITCHING-NODE-MIB
[Automatically extracted from oidview.com]
atmSaalConfSiVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Vpi value which, with the Vci value specified in atmSaalConfSiVci, defines the signalling channel for this entry. Usually, there is one signalling channel per interface defined by Vpi=0,Vci=5." ::= { atmSaalConfEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.33.1.9.2.1.1.1 | atmSaalConfIndex | 0 | 0 | The ifIndex value of the ATM interface which, with the signalling channel defined by its Vpi/Vci values, uniquely identifies this… |
| 1.3.6.1.4.1.2.6.33.1.9.2.1.1.3 | atmSaalConfSiVci | 0 | 0 | The Vci value which, with the Vpi value specified in atmSaalConfSiVpi, defines the signalling channel for this entry. Usually, the… |
| 1.3.6.1.4.1.2.6.33.1.9.2.1.1.4 | atmSaalState | 0 | 0 | The state of the SAAL for this interface as defined in the Q.2110 Specification, Chapter 7.3. |
| 1.3.6.1.4.1.2.6.33.1.9.2.1.1.5 | atmSaalTimerPoll | 0 | 0 | Timer_POLL as defined in the Q.2110 Specification. This timer is running in the active phase to assure that the peer receiver is … |
| 1.3.6.1.4.1.2.6.33.1.9.2.1.1.6 | atmSaalTimerKeepAlive | 0 | 0 | Timer_KEEP-ALIVE as defined in the Q.2110 Specification. This timer is started when entering the transient phase. |
| 1.3.6.1.4.1.2.6.33.1.9.2.1.1.7 | atmSaalTimerNoResponse | 0 | 0 | Timer_NO-RESPONSE as defined in the Q.2110 Specification. This timer indicates the maximum time interval during which at least on… |
| 1.3.6.1.4.1.2.6.33.1.9.2.1.1.8 | atmSaalTimerCC | 0 | 0 | Timer_CC as defined in the Q.2110 Specification. Transmission of PDUs is protected by this timer during establishment and release… |
| 1.3.6.1.4.1.2.6.33.1.9.2.1.1.9 | atmSaalTimerIdle | 0 | 0 | Timer_IDLE as defined in the Q.2110 Specification. This timer is started upon receipt of a STAT PDU when entering the idle phase … |
| 1.3.6.1.4.1.2.6.33.1.9.2.1.1.10 | atmSaalMaxCC | 0 | 0 | MaxCC as defined in the Q.2110 Specification. This is the maximum value for the state variable VT(CC), corresponding to the maxim… |
| 1.3.6.1.4.1.2.6.33.1.9.2.1.1.11 | atmSaalMaxPD | 0 | 0 | MaxPD as defined in the Q.2110 Specification. This is the maximum iacceptable value for the state variable VT(PD) before sending … |
| 1.3.6.1.4.1.2.6.33.1.9.2.1.1.12 | atmSaalMaxStat | 0 | 0 | MaxSTAT as defined in the Q.2110 Specification. This is the maximum number of list elements placed in a STAT PDU. |