This object will allow the user to set the number of BootP/RARP retries
that will be performed when the unit goes through its Boot sequence (unit
is reset or power cycled). This object is used in conjunction with the
ibm8224BootpRarpRetryInterval object. The default value will be 2 retries.
DURABLE
Parsed from file IBM8224.MIB.txt
Company: ibm
Module: IBM-8224-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
ibm8224BootpRarpRetries OBJECT-TYPE SYNTAX INTEGER (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "This object will allow the user to set the number of BootP/RARP retries that will be performed when the unit goes through its Boot sequence (unit is reset or power cycled). This object is used in conjunction with the ibm8224BootpRarpRetryInterval object. The default value will be 2 retries. DURABLE" ::= { ibm8224NmmInfo 16 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.39.1.16.0 | ibm8224BootpRarpRetries | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.39.1.1 | ibm8224ModuleDescr | 1 | 1 | The text description of the module. Includes microcode revision level. |
| 1.3.6.1.4.1.2.6.39.1.2 | ibm8224HwVer | 1 | 1 | The hardware version level. |
| 1.3.6.1.4.1.2.6.39.1.3 | ibm8224FwMajorVer | 1 | 1 | The major number of the microcode version. For example, if the microcode version is 2.12, the value of this object would be 2. |
| 1.3.6.1.4.1.2.6.39.1.4 | ibm8224FwMinorVer | 1 | 1 | The minor number of the microcode version. For example, if the microcode version is 2.12, the value of this object would be 12. |
| 1.3.6.1.4.1.2.6.39.1.5 | ibm8224ThisNmm | 1 | 1 | The stack index of the SNMP agent controlling this MIB. This corresponds to an entry in ibm8224StackTable. The topmost module in… |
| 1.3.6.1.4.1.2.6.39.1.6 | ibm8224WriteCommunity | 1 | 1 | The write community name FOR ALL MODULES IN THE STACK. If the value is not public, the write community name is not returned for … |
| 1.3.6.1.4.1.2.6.39.1.7 | ibm8224WriteProtected | 1 | 1 | When set to ro(2); read-only, the entire MIB, with the exception of this object is made read only. This can be used in conjuncti… |
| 1.3.6.1.4.1.2.6.39.1.8 | ibm8224BootpRarpRequests | 1 | 1 | If the hub does not have an IP address assignment it periodically attempts to find one via the BootP and RARP protocols. Settin… |
| 1.3.6.1.4.1.2.6.39.1.9 | ibm8224IPFrameType | 1 | 1 | Except when the hub is booting up, it will communicate over IP using a single frame type defining the type of network that the I… |
| 1.3.6.1.4.1.2.6.39.1.10 | ibm8224IPXFrameType | 1 | 1 | The frame type over which IPX communication originating from the ibm8224 will take place. The unit will respond to a packet usin… |
| 1.3.6.1.4.1.2.6.39.1.11 | ibm8224IPXSAPBroadcast | 1 | 1 | The hub will generate SAP broadcasts over IPX. This allows the hub to be auto-discovered by NMS (NetWare Management System) and… |
| 1.3.6.1.4.1.2.6.39.1.12 | ibm8224IPAutoDiscoveryState | 1 | 1 | This object will allow a user to enable the unit to send out periodic ICMP PINGs to ensure that the unit's IP Address is contain… |
| 1.3.6.1.4.1.2.6.39.1.13 | ibm8224PingPacketRate | 1 | 1 | This object will determine the rate (in seconds) at which ICMP Pings will be sent out by the unit to ensure that its IP Address … |
| 1.3.6.1.4.1.2.6.39.1.14 | ibm8224NVRAMStatus | 1 | 1 | This object provides status information of the NVRAM for the unit. If the value is error(2), status information will not be reta… |
| 1.3.6.1.4.1.2.6.39.1.15 | ibm8224rptrReset | 1 | 1 | Setting this object to reset(2) causes the unit to restart, as if the unit was switched off and then back on. All counters are … |
| 1.3.6.1.4.1.2.6.39.1.17 | ibm8224BootpRarpRetryInterval | 1 | 1 | This object will allow the user to set the time period (in seconds) after which a BootP/RARP attempt will time out and the unit … |
| 1.3.6.1.4.1.2.6.39.1.18 | ibm8224VT100ScreenRefresh | 1 | 1 | This object will determine the rate, in seconds, at which the VT100 screen will refresh the automatic fields (for example: stati… |
| 1.3.6.1.4.1.2.6.39.1.19 | ibm8224ModemInitString | 1 | 1 | This object provides a Modem Initialization String input which will be used to initialize a modem to the proper configuration. T… |
| 1.3.6.1.4.1.2.6.39.1.20 | ibm8224ModemAutoNegotiateState | 1 | 1 | If enabled(1), then the ibm8224 will adjust its speed to that specified when the modem answers the incoming connection. If the m… |
| 1.3.6.1.4.1.2.6.39.1.21 | ibm8224SlipIpAddr | 1 | 1 | The IP Address of the SLIP Interface over which the Management Software may be communicating. DURABLE |
| 1.3.6.1.4.1.2.6.39.1.22 | ibm8224SlipIpNetMask | 1 | 1 | The IP Subnet Mask of the SLIP Interface over which the Management Software may be communicating. DURABLE |
| 1.3.6.1.4.1.2.6.39.1.23 | ibm8224AutoPolarityReversal | 1 | 1 | The unit's ability to detect and reverse the polarity on the receive lines of all UTP ports can be enabled or disabled. DURABLE. |