The minor number of the microcode version. For example, if the
microcode version is 2.12, the value of this object would be 12.
Parsed from file IBM8224.MIB.txt
Company: ibm
Module: IBM-8224-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
ibm8224FwMinorVer OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minor number of the microcode version. For example, if the microcode version is 2.12, the value of this object would be 12." ::= { ibm8224NmmInfo 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.39.1.4.0 | ibm8224FwMinorVer | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2.6.39.1.1 | ibm8224ModuleDescr | 1 | 1 | The text description of the module. Includes microcode revision level. |
| 1.3.6.1.4.1.2.6.39.1.2 | ibm8224HwVer | 1 | 1 | The hardware version level. |
| 1.3.6.1.4.1.2.6.39.1.3 | ibm8224FwMajorVer | 1 | 1 | The major number of the microcode version. For example, if the microcode version is 2.12, the value of this object would be 2. |
| 1.3.6.1.4.1.2.6.39.1.5 | ibm8224ThisNmm | 1 | 1 | The stack index of the SNMP agent controlling this MIB. This corresponds to an entry in ibm8224StackTable. The topmost module in… |
| 1.3.6.1.4.1.2.6.39.1.6 | ibm8224WriteCommunity | 1 | 1 | The write community name FOR ALL MODULES IN THE STACK. If the value is not public, the write community name is not returned for … |
| 1.3.6.1.4.1.2.6.39.1.7 | ibm8224WriteProtected | 1 | 1 | When set to ro(2); read-only, the entire MIB, with the exception of this object is made read only. This can be used in conjuncti… |
| 1.3.6.1.4.1.2.6.39.1.8 | ibm8224BootpRarpRequests | 1 | 1 | If the hub does not have an IP address assignment it periodically attempts to find one via the BootP and RARP protocols. Settin… |
| 1.3.6.1.4.1.2.6.39.1.9 | ibm8224IPFrameType | 1 | 1 | Except when the hub is booting up, it will communicate over IP using a single frame type defining the type of network that the I… |
| 1.3.6.1.4.1.2.6.39.1.10 | ibm8224IPXFrameType | 1 | 1 | The frame type over which IPX communication originating from the ibm8224 will take place. The unit will respond to a packet usin… |
| 1.3.6.1.4.1.2.6.39.1.11 | ibm8224IPXSAPBroadcast | 1 | 1 | The hub will generate SAP broadcasts over IPX. This allows the hub to be auto-discovered by NMS (NetWare Management System) and… |
| 1.3.6.1.4.1.2.6.39.1.12 | ibm8224IPAutoDiscoveryState | 1 | 1 | This object will allow a user to enable the unit to send out periodic ICMP PINGs to ensure that the unit's IP Address is contain… |
| 1.3.6.1.4.1.2.6.39.1.13 | ibm8224PingPacketRate | 1 | 1 | This object will determine the rate (in seconds) at which ICMP Pings will be sent out by the unit to ensure that its IP Address … |
| 1.3.6.1.4.1.2.6.39.1.14 | ibm8224NVRAMStatus | 1 | 1 | This object provides status information of the NVRAM for the unit. If the value is error(2), status information will not be reta… |
| 1.3.6.1.4.1.2.6.39.1.15 | ibm8224rptrReset | 1 | 1 | Setting this object to reset(2) causes the unit to restart, as if the unit was switched off and then back on. All counters are … |
| 1.3.6.1.4.1.2.6.39.1.16 | ibm8224BootpRarpRetries | 1 | 1 | This object will allow the user to set the number of BootP/RARP retries that will be performed when the unit goes through its Bo… |
| 1.3.6.1.4.1.2.6.39.1.17 | ibm8224BootpRarpRetryInterval | 1 | 1 | This object will allow the user to set the time period (in seconds) after which a BootP/RARP attempt will time out and the unit … |
| 1.3.6.1.4.1.2.6.39.1.18 | ibm8224VT100ScreenRefresh | 1 | 1 | This object will determine the rate, in seconds, at which the VT100 screen will refresh the automatic fields (for example: stati… |
| 1.3.6.1.4.1.2.6.39.1.19 | ibm8224ModemInitString | 1 | 1 | This object provides a Modem Initialization String input which will be used to initialize a modem to the proper configuration. T… |
| 1.3.6.1.4.1.2.6.39.1.20 | ibm8224ModemAutoNegotiateState | 1 | 1 | If enabled(1), then the ibm8224 will adjust its speed to that specified when the modem answers the incoming connection. If the m… |
| 1.3.6.1.4.1.2.6.39.1.21 | ibm8224SlipIpAddr | 1 | 1 | The IP Address of the SLIP Interface over which the Management Software may be communicating. DURABLE |
| 1.3.6.1.4.1.2.6.39.1.22 | ibm8224SlipIpNetMask | 1 | 1 | The IP Subnet Mask of the SLIP Interface over which the Management Software may be communicating. DURABLE |
| 1.3.6.1.4.1.2.6.39.1.23 | ibm8224AutoPolarityReversal | 1 | 1 | The unit's ability to detect and reverse the polarity on the receive lines of all UTP ports can be enabled or disabled. DURABLE. |