To enable loop prevention the value of this object should be
'enabled(1)'. Otherwise, to turn off loop prevention, set this
value to 'disabled(2)'.
Current release of HuaweiMPLS does not provide support to assign
this MIB object with a value 'enabled'.
Parsed from file huawei-mpls-ldp.mib.txt
Company: huawei
Module: HUAWEI-MPLS-LDP-MIB
Vendor: Huawei
Module: HUAWEI-MPLS-LDP-MIB (huawei-mpls-ldp.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
hwMplsLdpLsrLoopPreventionAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "To enable loop prevention the value of this object should be 'enabled(1)'. Otherwise, to turn off loop prevention, set this value to 'disabled(2)'. Current release of HuaweiMPLS does not provide support to assign this MIB object with a value 'enabled'." DEFVAL { disabled } ::= { hwMplsLdpLsrIncarnEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.1 | hwMplsLdpLsrID | 0 | 0 | The LSR's Identifier. |
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.2 | hwMplsLdpLsrLoopDetectionPresent | 0 | 0 | A indication of whether this LSR supports loop detection. A value of 'true' indicates this LSR does support loop detection. A va… |
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.3 | hwMplsLdpLsrLoopDetectionAdminStatus | 0 | 0 | To enable loop detection the value of this object should be 'enabled(1)'. Otherwise, to turn off loop detection, set this value … |
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.4 | hwMplsLdpLsrPathVectorLimit | 0 | 0 | This object only has meaning if hwMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the… |
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.5 | hwMplsLdpLsrHopCountLimit | 0 | 0 | This object only has meaning if hwMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the… |
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.6 | hwMplsLdpLsrLoopPreventionPresent | 0 | 0 | A indication of whether this LSR supports loop prevention. A value of 'true' indicates this LSR does support loop prevention. A … |
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.8 | hwMplsLdpLsrLabelRetentionMode | 0 | 0 | The LSR can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative… |
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.9 | hwMplsLdpLsrIncarnID | 0 | 0 | The incarnation acts as index to all the elements in this table. |
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.10 | hwMplsLdpLsrMaxLdpEntities | 0 | 0 | The maximum number of LDP entities that can be supported by this Incarnation. |
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.11 | hwMplsLdpLsrMaxLocalPeers | 0 | 0 | The maximum number of Local LDP peers that can be supported by this Incarnation. |
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.12 | hwMplsLdpLsrMaxRemotePeers | 0 | 0 | The maximum number of Remote LDP peers that can be supported by this Incarnation. |
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.13 | hwMplsLdpLsrMaxIfaces | 0 | 0 | The maximum number of Label enabled Interfaces that can be supported by this Incarnation. |
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.14 | hwMplsLdpLsrMaxLsps | 0 | 0 | The maximum number of Label Switched Paths that can be supported by this Incarnation. |
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.15 | hwMplsLdpLsrMaxCrlspTnls | 0 | 0 | The maximum number of CRLSPs that can be supported by this Incarnation. |
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.16 | hwMplsLdpLsrMaxErhopPerCrlspTnl | 0 | 0 | The maximum number of ER-Hops that can be supported in a CRLSP tunnel. |
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.17 | hwMplsLdpLsrRowStatus | 0 | 0 | An object that allows entries in this table to be created and deleted using the RowStatus convention. |
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.18 | hwMplsLdpLsrMaxVcmCapability | 0 | 0 | None |
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.19 | hwMplsLdpLsrVcmPathVecInAllLblMapPresent | 0 | 0 | None |
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.20 | hwMplsLdpLsrRequestRetrytimerValue | 0 | 0 | None |
1.3.6.1.4.1.2011.5.12.2.1.1.1.1.21 | hwMplsLdpLsrNumOfRequestRetryAttempts | 0 | 0 | None |