An entry in this table represents an CRLSP MPLS tunnel.
An entry can be created by a network administrator.
Parsed from file huawei-mpls-ldp.mib.txt
Company: huawei
Module: HUAWEI-MPLS-LDP-MIB
Vendor: Huawei
Module: HUAWEI-MPLS-LDP-MIB (huawei-mpls-ldp.mib)
Type: ENTRY
Access: not-accessible
Syntax: HwMplsLdpCrlspTnlEntry
Automatically extracted from www.mibdepot.com
hwMplsLdpCrlspTnlEntry OBJECT-TYPE SYNTAX HwMplsLdpCrlspTnlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table represents an CRLSP MPLS tunnel. An entry can be created by a network administrator." INDEX { hwMplsLdpLsrIncarnID, hwMplsLdpCrlspTnlIndex } ::= { hwMplsLdpCrlspTnlTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.1 | hwMplsLdpCrlspTnlIndex | 0 | 0 | Uniquely identifies this row. |
| 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.2 | hwMplsLdpCrlspTnlName | 0 | 0 | The 'canonical' name assigned to the tunnel that can be used to refer to it on the 'console' port. |
| 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.3 | hwMplsLdpCrlspTnlDirection | 0 | 0 | Whether this tunnel is unidirectional-incoming, unidirectional-outgoing, or bidirectional. |
| 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.4 | hwMplsLdpCrlspTnlSignallingProto | 0 | 0 | The signaling protocol, if any, that set up this tunnel. |
| 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.5 | hwMplsLdpCrlspTnlSetupPrio | 0 | 0 | The setup priority of this tunnel. |
| 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.6 | hwMplsLdpCrlspTnlHoldingPrio | 0 | 0 | The holding priority for this tunnel. |
| 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.7 | hwMplsLdpCrlspTnlPeakDataRate | 0 | 0 | The peak rate - the maximum rate at which traffic will be sent on the CRLSP. |
| 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.8 | hwMplsLdpCrlspTnlPeakBurstSize | 0 | 0 | The peak burst size - the maximum burst size of the traffic that can occur in the established CRLSP. |
| 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.9 | hwMplsLdpCrlspTnlCommittedDataRate | 0 | 0 | The committed rate - the committed rate at which traffic will be sent on the CRLSP. |
| 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.10 | hwMplsLdpCrlspTnlCommittedBurstSize | 0 | 0 | The committed burst size - the committed burst size of the traffic that will be handled in the established CRLSP. |
| 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.11 | hwMplsLdpCrlspTnlExcessBurstSize | 0 | 0 | The Excess burst size - the excess burst size limit to be used for traffic conditioning at the ingress of the CRLSP. |
| 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.12 | hwMplsLdpCrlspTnlIsPinned | 0 | 0 | Indicates whether the loose-routed hops of this tunnel are to be pinned. |
| 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.13 | hwMplsLdpCrlspTnlFrequency | 0 | 0 | Indicates the frequency of usage of the established CRLSP. |
| 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.14 | hwMplsLdpCrlspTnlWeight | 0 | 0 | Indicates the weight that is the established CRLSP. |
| 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.15 | hwMplsLdpCrlspTnlRowStatus | 0 | 0 | For controlling the state of this row. The status can be set to 'active' only when atleast one ERHOP is created in the hwMplsLdpE… |