An entry in this table is created by an LSR for every LSP
capable of supporting MPLS OAM at egress.
Parsed from file HUAWEI-MPLSOAM-MIB.mib.txt
Company: huawei
Module: HUAWEI-MPLSOAM-MIB
hwMplsOamEgrEntry OBJECT-TYPE SYNTAX HwMplsOamEgrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in this table is created by an LSR for every LSP capable of supporting MPLS OAM at egress." INDEX { hwMplsOamEgrLspName, hwMplsOamEgrLsrId, hwMplsOamEgrSessTunnId } ::= { hwMplsOamEgrTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.1 | hwMplsOamEgrLspName | 0 | 0 | The object indicates the name of static LSP at egress. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.2 | hwMplsOamEgrLsrId | 0 | 0 | The object indicates the Ingress LSR ID of the LSP. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.3 | hwMplsOamEgrSessTunnId | 0 | 0 | The object indicates the the Ingress session tunnel ID of the LSP.. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.4 | hwMplsOamEgrDetType | 0 | 0 | 0: invalid, if auto-protocol, this detect type is invalid; 1: CV; 2: FFD. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.5 | hwMplsOamEgrDetFreq | 0 | 0 | 0: 1000ms(only for cv); 1: 10ms; 2: 20ms; 3: 50ms; 4: 100ms; 5: 200ms; 6: 500ms; 7: invalid; 8: 3ms. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.6 | hwMplsOamEgrRevType | 0 | 0 | When an LSP is found to be in defect, the sink LSR of the LSP should send BDI to inform the source LSR of the LSP,the BDI is tran… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.7 | hwMplsOamEgrRevTunnName | 0 | 0 | The object indicates the name of a reverse tunnel. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.8 | hwMplsOamEgrAutoEn | 0 | 0 | If autoprotocol, then the egress can process extended FDI sent by ingress. 0: disable; 1: enable; Valid only for the egress config… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.9 | hwMplsOamEgrAutoOvertime | 0 | 0 | This time is set at the egress. If the egress receives CV/FFD, it records the parameters included in the packet, such as OAM type… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.10 | hwMplsOamEgrBDIFreq | 0 | 0 | BDI is generated at the trail termination source point of a return path in response to a defect detected at the trail termination… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.11 | hwMplsOamEgrEnable | 0 | 0 | Whether one LSP is enabled with OAM. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LS… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.12 | hwMplsOamEgrValid | 0 | 0 | 1: stop detect; 2: start detect. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.13 | hwMplsOamEgrAvaState | 0 | 0 | If the LSP Timer (T1) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to b… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.14 | hwMplsOamEgrDefectType | 0 | 0 | 0: no defect; 1: dServer, 2: dPeerMe, 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSI-Mismatch, Trail Termination Sour… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.15 | hwMplsOamEgrRowStatus | 0 | 0 | This variable is used to create, modify, and delete a row in this table. |