BDI is generated at the trail termination source point of
a return path in response to a defect detected at the trail
termination sink point of an LSP in the forwarding direction.
The frequency of BDI can be set by user.
Only valid for egress configuration.
The default value is detect frequency and it is valid only when a
backward-LSP exists.
0: per-second;
1: same as detect frequency.
Parsed from file HUAWEI-MPLSOAM-MIB.mib.txt
Company: huawei
Module: HUAWEI-MPLSOAM-MIB
hwMplsOamEgrBDIFreq OBJECT-TYPE SYNTAX INTEGER { perSecond(0), detectFrequency(1) } MAX-ACCESS read-create STATUS current DESCRIPTION "BDI is generated at the trail termination source point of a return path in response to a defect detected at the trail termination sink point of an LSP in the forwarding direction. The frequency of BDI can be set by user. Only valid for egress configuration. The default value is detect frequency and it is valid only when a backward-LSP exists. 0: per-second; 1: same as detect frequency." ::= { hwMplsOamEgrEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.1 | hwMplsOamEgrLspName | 0 | 0 | The object indicates the name of static LSP at egress. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.2 | hwMplsOamEgrLsrId | 0 | 0 | The object indicates the Ingress LSR ID of the LSP. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.3 | hwMplsOamEgrSessTunnId | 0 | 0 | The object indicates the the Ingress session tunnel ID of the LSP.. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.4 | hwMplsOamEgrDetType | 0 | 0 | 0: invalid, if auto-protocol, this detect type is invalid; 1: CV; 2: FFD. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.5 | hwMplsOamEgrDetFreq | 0 | 0 | 0: 1000ms(only for cv); 1: 10ms; 2: 20ms; 3: 50ms; 4: 100ms; 5: 200ms; 6: 500ms; 7: invalid; 8: 3ms. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.6 | hwMplsOamEgrRevType | 0 | 0 | When an LSP is found to be in defect, the sink LSR of the LSP should send BDI to inform the source LSR of the LSP,the BDI is tran… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.7 | hwMplsOamEgrRevTunnName | 0 | 0 | The object indicates the name of a reverse tunnel. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.8 | hwMplsOamEgrAutoEn | 0 | 0 | If autoprotocol, then the egress can process extended FDI sent by ingress. 0: disable; 1: enable; Valid only for the egress config… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.9 | hwMplsOamEgrAutoOvertime | 0 | 0 | This time is set at the egress. If the egress receives CV/FFD, it records the parameters included in the packet, such as OAM type… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.11 | hwMplsOamEgrEnable | 0 | 0 | Whether one LSP is enabled with OAM. If disable, LSP is not monitored; If enable, CV/FFD is generated at the source LSR of the LS… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.12 | hwMplsOamEgrValid | 0 | 0 | 1: stop detect; 2: start detect. |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.13 | hwMplsOamEgrAvaState | 0 | 0 | If the LSP Timer (T1) expires, then the LSP enters the Unavailable state. The start point of the Unavailable state is deemed to b… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.14 | hwMplsOamEgrDefectType | 0 | 0 | 0: no defect; 1: dServer, 2: dPeerMe, 3: dLOCV, Loss of Connectivity Verification defect; 4: dTTSI-Mismatch, Trail Termination Sour… |
| 1.3.6.1.4.1.2011.5.12.7.1.1.3.1.15 | hwMplsOamEgrRowStatus | 0 | 0 | This variable is used to create, modify, and delete a row in this table. |