Represents the address type of destination.
Parsed from file NQA-MIB.mib.txt
Company: huawei
Module: NQA-MIB
nqaAdminParaTargetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the address type of destination." DEFVAL { unknown } ::= { nqaAdminParaEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.2 | nqaAdminParaTargetAddress | 0 | 0 | Represents the address of destination. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.3 | nqaAdminParaTargetPort | 0 | 0 | Represents the port number of destination. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.4 | nqaAdminParaSourceAddressType | 0 | 0 | Represents the address type of source. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.5 | nqaAdminParaSourceAddress | 0 | 0 | Represents the address of source. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.6 | nqaAdminParaSourcePort | 0 | 0 | Represents the port number of source. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.7 | nqaAdminParaMaxTtl | 0 | 0 | Specifies the maximum value of TTL. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.8 | nqaAdminParaInitialTtl | 0 | 0 | Specifies the initial value of TTL. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.9 | nqaAdminParaStorageType | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columna… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.10 | nqaAdminParaMaxFailures | 0 | 0 | The value of this object indicates the maximum number of consecutive timeouts allowed before terminating a remote traceroute requ… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.11 | nqaAdminParaDontFragment | 0 | 0 | This object enables setting of Don't Fragment (DF) flag in the IP header for a probe. Use of this object enables performing a man… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.12 | nqaAdminParaDataSize | 0 | 0 | The size of data field in packet. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.13 | nqaAdminParaDataFill | 0 | 0 | Represents the characters used for filling the data field. This object is used together with the corresponding object, nqaAdminPa… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.14 | nqaAdminParaIfIndex | 0 | 0 | Specified the source interface or tunnel, from which probes of the test instance are sent. The object applies to DHCP, jitter, ic… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.15 | nqaAdminParaByPassRouteTable | 0 | 0 | The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal … |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.16 | nqaAdminParaMiscOptions | 0 | 0 | Enables an application to specify implementation dependent options. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.17 | nqaAdminParaProbeCount | 0 | 0 | Specifies the number of packets sent by the test instance, or times of probe repeated, in which may send several packets. The se… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.18 | nqaAdminParaTrapGeneration | 0 | 0 | Switch of notification. Determine whether and how to send notifications for the test instance: - probeFailure(0) - Generate a… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.19 | nqaAdminParaTrapProbeFailureFilter | 0 | 0 | Specifies the condition when to trigger an nqaProbeFailed notification. When the number of consecutive failed probes violates th… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.20 | nqaAdminParaTrapTestFailureFilter | 0 | 0 | Specifies the condition when to trigger an nqaTestFailed notification. When the number of failed tests violates the threshold in… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.21 | nqaAdminParaDSField | 0 | 0 | Specifies the Differentiated Services (DS) field in the IP packet. The DS field is defined as the Type Of Service (TOS) octet in… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.22 | nqaAdminParaDnsServerAddressType | 0 | 0 | Specifies the address type of DNS server. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.23 | nqaAdminParaDnsServerAddress | 0 | 0 | Specifies the address of DNS server. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.24 | nqaAdminParaOperation | 0 | 0 | Specifies the operation of FTP or HTTP type test instance. The operations of FTP-type test instance include get and put. The oper… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.25 | nqaAdminParaHttpVersion | 0 | 0 | Specifies the version of HTTP. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.26 | nqaAdminParaHttpOperationString | 0 | 0 | A string that specifies the HTTP operation which will be sent to the HTTP server. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.27 | nqaAdminParaTestFailurePercent | 0 | 0 | Specifies the scale over which the test will be regarded as failed. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.28 | nqaAdminParaFtpUserName | 0 | 0 | Specifies the user name of the FTP server. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.29 | nqaAdminParaFtpPassword | 0 | 0 | Specifies the password of the user of the FTP server. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.30 | nqaAdminParaFtpFilePath | 0 | 0 | Specifies the full name of the file which will be transmitted by the FTP-type test instance. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.31 | nqaAdminParaFtpFileSize | 0 | 0 | Specifies the size that the file will be transmitted by the FTP-type test instance. It may be part of the file. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.32 | nqaAdminParaInterval | 0 | 0 | Specifies the interval between two consecutive probe packets. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.33 | nqaAdminParaNumPackets | 0 | 0 | Specifies the number of packet sent in each probe. This object is used together with nqaAdminParaProbeCount, and only apples to j… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.34 | nqaAdminParaVrfName | 0 | 0 | Specifies the VRF name. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.35 | nqaAdminParaLspAddressType | 0 | 0 | Specifies the address type of LSP. The object applies to lspping and lsptrace type test instance. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.36 | nqaAdminParaLspAddressMask | 0 | 0 | Specifies the address mask of LSP. The object apples to lspping and lsptrace type test instance. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.37 | nqaAdminParaLspIpAddress | 0 | 0 | IP Address filled in the ip header, must be a 127/8 address. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.38 | nqaAdminParaLspPWE3VcId | 0 | 0 | The local Pseudo wire ID in PWE3 Ping test |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.39 | nqaAdminParaLspPWE3Type | 0 | 0 | The encapsulation type of Pseudo wire ID in the PWE3 Ping test |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.40 | nqaAdminParaLspPWE3Option | 0 | 0 | The label type of PWE3 Ping and PWE3 Tracert test. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.41 | nqaAdminParaLspPWE3RemoteVcId | 0 | 0 | The remote Pseudo wire ID in PWE Ping test. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.42 | nqaAdminParaLspPWE3RemoteAddress | 0 | 0 | The remote IP address in PWE3 Ping test. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.43 | nqaAdminParaLspExp | 0 | 0 | The 3bit EXP field of the MPLS echo packet label. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.44 | nqaAdminParaLspReplyMode | 0 | 0 | ReplyMode Value Meaning 1 Do not reply 2 Reply via an IPv4/IPv6 UDP packet 3 Reply via an IPv4/IPv6 UDP packet with Ro… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.45 | nqaAdminParaResultRowMax | 0 | 0 | Specifies the maximum number of result records. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.46 | nqaAdminParaHistoryRowMax | 0 | 0 | Specifies the maximum number of history records. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.47 | nqaAdminParaCreateHopsEntries | 0 | 0 | When set to 'enable (1)', the result of each hop will be kept in nqaResultsTable. The object applies to trace, pwe3trace, lsptrac… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.48 | nqaAdminParaLspVCType | 0 | 0 | The type of protocol which establishes PW in the pwe3tracert test |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.49 | nqaAdminParaMTraceLastHopAddress | 0 | 0 | The last hop router's IP address in Mtrace test. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.50 | nqaAdminParaMTraceSourceAddress | 0 | 0 | The IP address of the multicast source for the path being traced in Mtrace test. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.51 | nqaAdminParaMTraceGroupAddress | 0 | 0 | The group address to be traced in Mtrace test, or zero if no group-specific information is desired. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.52 | nqaAdminParaMTraceMaxTtl | 0 | 0 | The maximum number of hops that the requester wants to trace in Mtrace test. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.53 | nqaAdminParaMTraceSendMode | 0 | 0 | The sending mode of the Query pamessage in Mtrace test. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.54 | nqaAdminParaMTraceResponseTtl | 0 | 0 | The TTL at which to multicast the response in Mtrace test, if the response address is a multicast address. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.55 | nqaAdminParaMTraceResponseAddressType | 0 | 0 | Mtrace response address type |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.56 | nqaAdminParaMTraceResponseAddress | 0 | 0 | This field specifies where the completed traceroute response packet gets sent in Mtrace test. It can be a unicast address or a mu… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.57 | nqaAdminParaDistanceNodeType | 0 | 0 | The destination of MAC ping(mac address or rmepid). |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.58 | nqaAdminParaMacAddress | 0 | 0 | Mac address of the destination of MAC PING. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.59 | nqaAdminParaRMepID | 0 | 0 | Rmepid of the destination of MAC PING. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.60 | nqaAdminParaMDName | 0 | 0 | Indicate the MD name in which the MAC Ping operated. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.61 | nqaAdminParaMAName | 0 | 0 | Indicate the MA name in which the MAC Ping operated. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.62 | nqaAdminParaMacTunnelName | 0 | 0 | Indicate the MAC Tunnel name in which the MAC Ping operated. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.63 | nqaAdminParaPathMtuStep | 0 | 0 | Specify the step of the path MTU test.If the last response was received successful,the next packet's length will add the step. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.64 | nqaAdminParaPathMtuDiscoveryPathMtuMax | 0 | 0 | Specify the max value of the discovery field in the path MTU test. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.65 | nqaAdminParaIcmpJitterMode | 0 | 0 | Select the type of ICMP packets to be sent in ICMP jitter and path jitter test.The value can be icmpTimestamp(1) or icmpEcho(2). |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.66 | nqaAdminParaCodecType | 0 | 0 | To indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.67 | nqaAdminParaIcpifAdvFactor | 0 | 0 | The advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.68 | nqaAdminParaFtpMode | 0 | 0 | To indicate the mode to be used with ftp probe. This is applicable only for the ftp probe. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.69 | nqaAdminParaHardwareBased | 0 | 0 | Indicates that the hardware is enabled to send packets. (The value range: enable:1;disable:2.The default value is disable(2)) |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.70 | nqaAdminParaPppoeUserName | 0 | 0 | Specifies the username of PPPoE dial-up. For jitter,icmp,traceroute, tcp,udp,ftp,dns,http probes, this parameter indicates that t… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.71 | nqaAdminParaPppoePassword | 0 | 0 | Specifies the password of PPPoE dial-up. This is applicable only for the PPPoE probe. This parameter accepts the characters in si… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.72 | nqaAdminParaPppoeVlanIf | 0 | 0 | Specifies the vlanif of PPPoE dial-up. For jitter,icmp,traceroute, tcp,udp,ftp,dns,http probes, this parameter indicates that the… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.73 | nqaAdminParaPppoeAuthenticationMode | 0 | 0 | Specifies the authentication mode of PPPoE dial-up. This is applicable only for the PPPoE probe. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.74 | nqaAdminParaPppoeRedialUpTimes | 0 | 0 | Specifies the redialup times of PPPoE dial-up. This is applicable only for the PPPoE probe. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.75 | nqaAdminParaPppoeInterval | 0 | 0 | Specifies the redialup interval of PPPoE dial-up. This is applicable only for the PPPoE probe. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.76 | nqaAdminParaVsiName | 0 | 0 | Specify the name of the VSI(Virtual Switch Instance) |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.77 | nqaAdminParaVlanId | 0 | 0 | Specify the Vlan ID |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.78 | nqaAdminParaLspTunnelType | 0 | 0 | To indicate ping/trace which lsp tunnel. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.79 | nqaAdminParaLspNextHopAddress | 0 | 0 | Represents the address of nexthop. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.80 | nqaAdminParaLspVersion | 0 | 0 | Specify lsp version of protocol. Draft-ietf-mpls-lsp-ping-06 protocol or RFC4379 protocol. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.81 | nqaAdminParaRemoteAddressType | 0 | 0 | Represents the address type of remote. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.82 | nqaAdminParaRemoteAddress | 0 | 0 | Represents the address of remote. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.83 | nqaAdminParaTimeUnit | 0 | 0 | The unit of the timestamp, ms or us. |