Specified the source interface or tunnel, from which probes
of the test instance are sent. The object applies to DHCP,
jitter, icmpjitter, ICMP, lspping or lsptrace type test instance.
The value zero implies that the object is disabled.
Parsed from file NQA-MIB.mib.txt
Company: huawei
Module: NQA-MIB
nqaAdminParaIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "Specified the source interface or tunnel, from which probes of the test instance are sent. The object applies to DHCP, jitter, icmpjitter, ICMP, lspping or lsptrace type test instance. The value zero implies that the object is disabled." DEFVAL { 0 } ::= { nqaAdminParaEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.1 | nqaAdminParaTargetAddressType | 0 | 0 | Represents the address type of destination. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.2 | nqaAdminParaTargetAddress | 0 | 0 | Represents the address of destination. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.3 | nqaAdminParaTargetPort | 0 | 0 | Represents the port number of destination. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.4 | nqaAdminParaSourceAddressType | 0 | 0 | Represents the address type of source. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.5 | nqaAdminParaSourceAddress | 0 | 0 | Represents the address of source. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.6 | nqaAdminParaSourcePort | 0 | 0 | Represents the port number of source. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.7 | nqaAdminParaMaxTtl | 0 | 0 | Specifies the maximum value of TTL. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.8 | nqaAdminParaInitialTtl | 0 | 0 | Specifies the initial value of TTL. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.9 | nqaAdminParaStorageType | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columna… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.10 | nqaAdminParaMaxFailures | 0 | 0 | The value of this object indicates the maximum number of consecutive timeouts allowed before terminating a remote traceroute requ… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.11 | nqaAdminParaDontFragment | 0 | 0 | This object enables setting of Don't Fragment (DF) flag in the IP header for a probe. Use of this object enables performing a man… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.12 | nqaAdminParaDataSize | 0 | 0 | The size of data field in packet. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.13 | nqaAdminParaDataFill | 0 | 0 | Represents the characters used for filling the data field. This object is used together with the corresponding object, nqaAdminPa… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.15 | nqaAdminParaByPassRouteTable | 0 | 0 | The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal … |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.16 | nqaAdminParaMiscOptions | 0 | 0 | Enables an application to specify implementation dependent options. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.17 | nqaAdminParaProbeCount | 0 | 0 | Specifies the number of packets sent by the test instance, or times of probe repeated, in which may send several packets. The se… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.18 | nqaAdminParaTrapGeneration | 0 | 0 | Switch of notification. Determine whether and how to send notifications for the test instance: - probeFailure(0) - Generate a… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.19 | nqaAdminParaTrapProbeFailureFilter | 0 | 0 | Specifies the condition when to trigger an nqaProbeFailed notification. When the number of consecutive failed probes violates th… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.20 | nqaAdminParaTrapTestFailureFilter | 0 | 0 | Specifies the condition when to trigger an nqaTestFailed notification. When the number of failed tests violates the threshold in… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.21 | nqaAdminParaDSField | 0 | 0 | Specifies the Differentiated Services (DS) field in the IP packet. The DS field is defined as the Type Of Service (TOS) octet in… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.22 | nqaAdminParaDnsServerAddressType | 0 | 0 | Specifies the address type of DNS server. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.23 | nqaAdminParaDnsServerAddress | 0 | 0 | Specifies the address of DNS server. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.24 | nqaAdminParaOperation | 0 | 0 | Specifies the operation of FTP or HTTP type test instance. The operations of FTP-type test instance include get and put. The oper… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.25 | nqaAdminParaHttpVersion | 0 | 0 | Specifies the version of HTTP. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.26 | nqaAdminParaHttpOperationString | 0 | 0 | A string that specifies the HTTP operation which will be sent to the HTTP server. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.27 | nqaAdminParaTestFailurePercent | 0 | 0 | Specifies the scale over which the test will be regarded as failed. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.28 | nqaAdminParaFtpUserName | 0 | 0 | Specifies the user name of the FTP server. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.29 | nqaAdminParaFtpPassword | 0 | 0 | Specifies the password of the user of the FTP server. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.30 | nqaAdminParaFtpFilePath | 0 | 0 | Specifies the full name of the file which will be transmitted by the FTP-type test instance. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.31 | nqaAdminParaFtpFileSize | 0 | 0 | Specifies the size that the file will be transmitted by the FTP-type test instance. It may be part of the file. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.32 | nqaAdminParaInterval | 0 | 0 | Specifies the interval between two consecutive probe packets. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.33 | nqaAdminParaNumPackets | 0 | 0 | Specifies the number of packet sent in each probe. This object is used together with nqaAdminParaProbeCount, and only apples to j… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.34 | nqaAdminParaVrfName | 0 | 0 | Specifies the VRF name. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.35 | nqaAdminParaLspAddressType | 0 | 0 | Specifies the address type of LSP. The object applies to lspping and lsptrace type test instance. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.36 | nqaAdminParaLspAddressMask | 0 | 0 | Specifies the address mask of LSP. The object apples to lspping and lsptrace type test instance. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.37 | nqaAdminParaLspIpAddress | 0 | 0 | IP Address filled in the ip header, must be a 127/8 address. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.38 | nqaAdminParaLspPWE3VcId | 0 | 0 | The local Pseudo wire ID in PWE3 Ping test |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.39 | nqaAdminParaLspPWE3Type | 0 | 0 | The encapsulation type of Pseudo wire ID in the PWE3 Ping test |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.40 | nqaAdminParaLspPWE3Option | 0 | 0 | The label type of PWE3 Ping and PWE3 Tracert test. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.41 | nqaAdminParaLspPWE3RemoteVcId | 0 | 0 | The remote Pseudo wire ID in PWE Ping test. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.42 | nqaAdminParaLspPWE3RemoteAddress | 0 | 0 | The remote IP address in PWE3 Ping test. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.43 | nqaAdminParaLspExp | 0 | 0 | The 3bit EXP field of the MPLS echo packet label. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.44 | nqaAdminParaLspReplyMode | 0 | 0 | ReplyMode Value Meaning 1 Do not reply 2 Reply via an IPv4/IPv6 UDP packet 3 Reply via an IPv4/IPv6 UDP packet with Ro… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.45 | nqaAdminParaResultRowMax | 0 | 0 | Specifies the maximum number of result records. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.46 | nqaAdminParaHistoryRowMax | 0 | 0 | Specifies the maximum number of history records. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.47 | nqaAdminParaCreateHopsEntries | 0 | 0 | When set to 'enable (1)', the result of each hop will be kept in nqaResultsTable. The object applies to trace, pwe3trace, lsptrac… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.48 | nqaAdminParaLspVCType | 0 | 0 | The type of protocol which establishes PW in the pwe3tracert test |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.49 | nqaAdminParaMTraceLastHopAddress | 0 | 0 | The last hop router's IP address in Mtrace test. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.50 | nqaAdminParaMTraceSourceAddress | 0 | 0 | The IP address of the multicast source for the path being traced in Mtrace test. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.51 | nqaAdminParaMTraceGroupAddress | 0 | 0 | The group address to be traced in Mtrace test, or zero if no group-specific information is desired. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.52 | nqaAdminParaMTraceMaxTtl | 0 | 0 | The maximum number of hops that the requester wants to trace in Mtrace test. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.53 | nqaAdminParaMTraceSendMode | 0 | 0 | The sending mode of the Query pamessage in Mtrace test. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.54 | nqaAdminParaMTraceResponseTtl | 0 | 0 | The TTL at which to multicast the response in Mtrace test, if the response address is a multicast address. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.55 | nqaAdminParaMTraceResponseAddressType | 0 | 0 | Mtrace response address type |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.56 | nqaAdminParaMTraceResponseAddress | 0 | 0 | This field specifies where the completed traceroute response packet gets sent in Mtrace test. It can be a unicast address or a mu… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.57 | nqaAdminParaDistanceNodeType | 0 | 0 | The destination of MAC ping(mac address or rmepid). |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.58 | nqaAdminParaMacAddress | 0 | 0 | Mac address of the destination of MAC PING. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.59 | nqaAdminParaRMepID | 0 | 0 | Rmepid of the destination of MAC PING. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.60 | nqaAdminParaMDName | 0 | 0 | Indicate the MD name in which the MAC Ping operated. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.61 | nqaAdminParaMAName | 0 | 0 | Indicate the MA name in which the MAC Ping operated. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.62 | nqaAdminParaMacTunnelName | 0 | 0 | Indicate the MAC Tunnel name in which the MAC Ping operated. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.63 | nqaAdminParaPathMtuStep | 0 | 0 | Specify the step of the path MTU test.If the last response was received successful,the next packet's length will add the step. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.64 | nqaAdminParaPathMtuDiscoveryPathMtuMax | 0 | 0 | Specify the max value of the discovery field in the path MTU test. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.65 | nqaAdminParaIcmpJitterMode | 0 | 0 | Select the type of ICMP packets to be sent in ICMP jitter and path jitter test.The value can be icmpTimestamp(1) or icmpEcho(2). |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.66 | nqaAdminParaCodecType | 0 | 0 | To indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.67 | nqaAdminParaIcpifAdvFactor | 0 | 0 | The advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.68 | nqaAdminParaFtpMode | 0 | 0 | To indicate the mode to be used with ftp probe. This is applicable only for the ftp probe. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.69 | nqaAdminParaHardwareBased | 0 | 0 | Indicates that the hardware is enabled to send packets. (The value range: enable:1;disable:2.The default value is disable(2)) |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.70 | nqaAdminParaPppoeUserName | 0 | 0 | Specifies the username of PPPoE dial-up. For jitter,icmp,traceroute, tcp,udp,ftp,dns,http probes, this parameter indicates that t… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.71 | nqaAdminParaPppoePassword | 0 | 0 | Specifies the password of PPPoE dial-up. This is applicable only for the PPPoE probe. This parameter accepts the characters in si… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.72 | nqaAdminParaPppoeVlanIf | 0 | 0 | Specifies the vlanif of PPPoE dial-up. For jitter,icmp,traceroute, tcp,udp,ftp,dns,http probes, this parameter indicates that the… |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.73 | nqaAdminParaPppoeAuthenticationMode | 0 | 0 | Specifies the authentication mode of PPPoE dial-up. This is applicable only for the PPPoE probe. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.74 | nqaAdminParaPppoeRedialUpTimes | 0 | 0 | Specifies the redialup times of PPPoE dial-up. This is applicable only for the PPPoE probe. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.75 | nqaAdminParaPppoeInterval | 0 | 0 | Specifies the redialup interval of PPPoE dial-up. This is applicable only for the PPPoE probe. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.76 | nqaAdminParaVsiName | 0 | 0 | Specify the name of the VSI(Virtual Switch Instance) |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.77 | nqaAdminParaVlanId | 0 | 0 | Specify the Vlan ID |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.78 | nqaAdminParaLspTunnelType | 0 | 0 | To indicate ping/trace which lsp tunnel. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.79 | nqaAdminParaLspNextHopAddress | 0 | 0 | Represents the address of nexthop. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.80 | nqaAdminParaLspVersion | 0 | 0 | Specify lsp version of protocol. Draft-ietf-mpls-lsp-ping-06 protocol or RFC4379 protocol. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.81 | nqaAdminParaRemoteAddressType | 0 | 0 | Represents the address type of remote. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.82 | nqaAdminParaRemoteAddress | 0 | 0 | Represents the address of remote. |
| 1.3.6.1.4.1.2011.5.25.111.2.2.1.83 | nqaAdminParaTimeUnit | 0 | 0 | The unit of the timestamp, ms or us. |