The total count of probe packets of Traceroute
or LSP Traceroute test in a hop count index.
Parsed from file NQA-MIB.mib.txt
Company: huawei
Module: NQA-MIB
nqaResultsCurProbeCount OBJECT-TYPE SYNTAX Gauge32 UNITS "probes" MAX-ACCESS read-only STATUS current DESCRIPTION "The total count of probe packets of Traceroute or LSP Traceroute test in a hop count index." ::= { nqaResultsEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.1 | nqaResultsIndex | 0 | 0 | The result table index and times of dispatching dependency tests. Each test can only reserve 5 records. The result table only co… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.2 | nqaResultsHopIndex | 0 | 0 | The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default va… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.3 | nqaResultsCompletions | 0 | 0 | The status of test. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.4 | nqaResultsTestAttempts | 0 | 0 | The times of executing tests, which includes the times of successful execution, failed execution and interruption (interrupted b… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.5 | nqaResultsCurHopCount | 0 | 0 | It is equal to the hop count index executed by current Traceroute or LSP Traceroute tests. Ping/LSP Ping does not use this entry.… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.7 | nqaResultsRTDOverThresholds | 0 | 0 | The times of successful statistics test RTD (Round Trip Delay) over the threshold. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.8 | nqaResultsSumCompletionTime | 0 | 0 | The sum of RTT (response time) of all packets of each hop for executing Traceroute, LSP Traceroute tests. The sum of RTT (respon… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.9 | nqaResultsSumCompletionTime2Low | 0 | 0 | The low order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfu… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.10 | nqaResultsSumCompletionTime2High | 0 | 0 | The high order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successf… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.11 | nqaResultsCompletionTimeMin | 0 | 0 | The minimum RTT (for Traceroute and LSP Traceroute, it is the minimum RTT among all the packet of next hop) of all packets for e… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.12 | nqaResultsCompletionTimeMax | 0 | 0 | The maximum RTT (for Traceroute and LSP Traceroute, it is the maximum RTT among all the packets of next hop) of all packets in e… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.13 | nqaResultsDisconnects | 0 | 0 | The times of consecutive failures. For connectionless protocol type of test,this number should be zero. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.14 | nqaResultsTimeouts | 0 | 0 | The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.15 | nqaResultsBusies | 0 | 0 | The times of failure to apply resource due to the busy system. such as apply memory or create socket failure. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.16 | nqaResultsNoConnections | 0 | 0 | the number of occasions when a NQA operation could not be initiated because the connection to the target has not been established… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.17 | nqaResultsSequenceErrors | 0 | 0 | the number of NQA operation completions received with an unexpected sequence identifier. For all other values of nqaAdminCtrlTyp… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.18 | nqaResultsDrops | 0 | 0 | The times probes of the test dropped due to sending or connecting failure. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.19 | nqaResultsAddressType | 0 | 0 | The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16). |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.20 | nqaResultsAddress | 0 | 0 | The destination address (TraceRoute is the destination address of each hop, and ping is the destination address of tests). |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.21 | nqaResultsProbeResponses | 0 | 0 | Number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses … |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.22 | nqaResultsSentProbes | 0 | 0 | The value of this object reflects the number of probes sent for the corresponding test. The value of this object MUST be reported… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.23 | nqaResultsLastGoodProbe | 0 | 0 | Date and time when the last response was received for a probe. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.24 | nqaResultsLastGoodPath | 0 | 0 | The date and time when the last complete path was determined. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.25 | nqaResultsTestFinished | 0 | 0 | The status of test execution. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.26 | nqaResultsRttAvg | 0 | 0 | The average of RTTs that were successfully measured by tests. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.27 | nqaResultsLostPacketRatio | 0 | 0 | The ratio of the packets lost to all packets sent in the test. |