The sum of RTT (response time) of all packets of each hop for executing Traceroute,
LSP Traceroute tests. The sum of RTT (response time) of sent packets for executing ping,
lsp ping and disman-ping tests and so on.
Parsed from file NQA-MIB.mib.txt
Company: huawei
Module: NQA-MIB
nqaResultsSumCompletionTime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The sum of RTT (response time) of all packets of each hop for executing Traceroute, LSP Traceroute tests. The sum of RTT (response time) of sent packets for executing ping, lsp ping and disman-ping tests and so on." ::= { nqaResultsEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.1 | nqaResultsIndex | 0 | 0 | The result table index and times of dispatching dependency tests. Each test can only reserve 5 records. The result table only co… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.2 | nqaResultsHopIndex | 0 | 0 | The hop index. If the test type is Traceroute or LSP Traceroute, the entry only defines one hop. For other types, the default va… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.3 | nqaResultsCompletions | 0 | 0 | The status of test. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.4 | nqaResultsTestAttempts | 0 | 0 | The times of executing tests, which includes the times of successful execution, failed execution and interruption (interrupted b… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.5 | nqaResultsCurHopCount | 0 | 0 | It is equal to the hop count index executed by current Traceroute or LSP Traceroute tests. Ping/LSP Ping does not use this entry.… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.6 | nqaResultsCurProbeCount | 0 | 0 | The total count of probe packets of Traceroute or LSP Traceroute test in a hop count index. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.7 | nqaResultsRTDOverThresholds | 0 | 0 | The times of successful statistics test RTD (Round Trip Delay) over the threshold. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.9 | nqaResultsSumCompletionTime2Low | 0 | 0 | The low order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successfu… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.10 | nqaResultsSumCompletionTime2High | 0 | 0 | The high order 32 bits of the accumulated squares of completion times (in milliseconds) of NQA operations which complete successf… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.11 | nqaResultsCompletionTimeMin | 0 | 0 | The minimum RTT (for Traceroute and LSP Traceroute, it is the minimum RTT among all the packet of next hop) of all packets for e… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.12 | nqaResultsCompletionTimeMax | 0 | 0 | The maximum RTT (for Traceroute and LSP Traceroute, it is the maximum RTT among all the packets of next hop) of all packets in e… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.13 | nqaResultsDisconnects | 0 | 0 | The times of consecutive failures. For connectionless protocol type of test,this number should be zero. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.14 | nqaResultsTimeouts | 0 | 0 | The number of occasions when a NQA operation was not completed before a timeout occurred, i.e. nqaAdminCtrlTimeOut was exceeded. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.15 | nqaResultsBusies | 0 | 0 | The times of failure to apply resource due to the busy system. such as apply memory or create socket failure. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.16 | nqaResultsNoConnections | 0 | 0 | the number of occasions when a NQA operation could not be initiated because the connection to the target has not been established… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.17 | nqaResultsSequenceErrors | 0 | 0 | the number of NQA operation completions received with an unexpected sequence identifier. For all other values of nqaAdminCtrlTyp… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.18 | nqaResultsDrops | 0 | 0 | The times probes of the test dropped due to sending or connecting failure. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.19 | nqaResultsAddressType | 0 | 0 | The destination address type, and the value range can be unknown(0), ipv4(1) and dns(16). |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.20 | nqaResultsAddress | 0 | 0 | The destination address (TraceRoute is the destination address of each hop, and ping is the destination address of tests). |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.21 | nqaResultsProbeResponses | 0 | 0 | Number of responses received for the corresponding test. The value of this object MUST be reported as 0 when no probe responses … |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.22 | nqaResultsSentProbes | 0 | 0 | The value of this object reflects the number of probes sent for the corresponding test. The value of this object MUST be reported… |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.23 | nqaResultsLastGoodProbe | 0 | 0 | Date and time when the last response was received for a probe. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.24 | nqaResultsLastGoodPath | 0 | 0 | The date and time when the last complete path was determined. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.25 | nqaResultsTestFinished | 0 | 0 | The status of test execution. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.26 | nqaResultsRttAvg | 0 | 0 | The average of RTTs that were successfully measured by tests. |
| 1.3.6.1.4.1.2011.5.25.111.4.1.1.27 | nqaResultsLostPacketRatio | 0 | 0 | The ratio of the packets lost to all packets sent in the test. |