Indicates the setup PRI of auto-bypass tunnel.
Range: 0-7
Default: 7
Parsed from file HUAWEI-MPLS-EXTEND-MIB.mib.txt
Company: huawei
Module: HUAWEI-MPLS-EXTEND-MIB
hwMplsTunnelFrrSetupPrio OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the setup PRI of auto-bypass tunnel. Range: 0-7 Default: 7 " ::= { hwMplsTunnelEntry 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2011.5.25.121.1.1.1.1 | hwMplsTunnelIndex | 0 | 0 | Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. When the MPLS signalling protocol is rsv… |
1.3.6.1.4.1.2011.5.25.121.1.1.1.2 | hwMplsTunnelInstance | 0 | 0 | Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is used to identify multiple … |
1.3.6.1.4.1.2011.5.25.121.1.1.1.3 | hwMplsTunnelIngressLSRId | 0 | 0 | Indicates the ingress LSR ID of this tunnel. When the MPLS signalling protocol is rsvp(2), this value equals to the Tunnel Sender … |
1.3.6.1.4.1.2011.5.25.121.1.1.1.4 | hwMplsTunnelEgressLSRId | 0 | 0 | Indicates the egress LSR ID of this tunnel. Reference to MPLS-TE-STD-MIB. |
1.3.6.1.4.1.2011.5.25.121.1.1.1.5 | hwMplsTunnelClassType | 0 | 0 | Indicates the bandwidth type used by this tunnel. Options: 1. bc0(1) -indicates the bandwidth type is bc0. 2. bc1(2) … |
1.3.6.1.4.1.2011.5.25.121.1.1.1.6 | hwMplsTunnelBandwidth | 0 | 0 | Indicates the bandwidth used by this tunnel. Unit: kbit/s |
1.3.6.1.4.1.2011.5.25.121.1.1.1.7 | hwMplsTunnelAdminStatus | 0 | 0 | Indicates the management status of this tunnel.Reference to MPLS-TE-STD-MIB. Options: 1. up(1) -indicates the management stat… |
1.3.6.1.4.1.2011.5.25.121.1.1.1.8 | hwMplsTunnelOperStatus | 0 | 0 | Indicates the actual operational status of this tunnel, which is but not limited to the status of this tunnel of a certain period… |
1.3.6.1.4.1.2011.5.25.121.1.1.1.9 | hwMplsTunnelSessionAttr | 0 | 0 | Indicates protection types desired by the primary tunnel, such as node protection, link protection or bandwidth protection. Option… |
1.3.6.1.4.1.2011.5.25.121.1.1.1.11 | hwMplsTunnelFrrHoldingPrio | 0 | 0 | Indicates the holding PRI of auto-bypass tunnel. Range: 0-7 Default: 7 |
1.3.6.1.4.1.2011.5.25.121.1.1.1.12 | hwMplsTunnelFrrBandwidth | 0 | 0 | Indicates the protecting bandwidth of auto-bypass tunnel. Its value is defined by the configuration on the primary tunnel. Unit: k… |
1.3.6.1.4.1.2011.5.25.121.1.1.1.13 | hwMplsTunnelFrrSwitchover | 0 | 0 | Indicates FRR switching times |
1.3.6.1.4.1.2011.5.25.121.1.1.1.14 | hwMplsTunnelFrrBypassTableIndex | 0 | 0 | Indicates the index of the bypass tunnel table, that is, the LSP ID of the bypass tunnel. The bypass table shows interfaces prote… |
1.3.6.1.4.1.2011.5.25.121.1.1.1.15 | hwMplsTunnelFrrARHopTableIndex | 0 | 0 | Indicates the table index of the protection type adopted by each hop of the primary tunnel. |
1.3.6.1.4.1.2011.5.25.121.1.1.1.16 | hwMplsTunnelName | 0 | 0 | Indicates the tunnel name. The name can refer to the tunnel on the console port of the LSR. If mplsTunnelIsIf is set to True, the… |
1.3.6.1.4.1.2011.5.25.121.1.1.1.17 | hwMplsTunnelIfIndex | 0 | 0 | Indicates the interface index of the tunnel. It uniquely identifies the tunnel name. |
1.3.6.1.4.1.2011.5.25.121.1.1.1.18 | hwMplsTunnelPreBandwidth | 0 | 0 | Indicates the original bandwidth of the tunnel when the tunnel is in the Modify state. Unit: kbit/s |
1.3.6.1.4.1.2011.5.25.121.1.1.1.19 | hwMplsTunnelNextBandwidth | 0 | 0 | Indicates the bandwidth of the tunnel that is to be changed when the tunnel is in the Modify state. Unit: kbit/s |
1.3.6.1.4.1.2011.5.25.121.1.1.1.20 | hwMplsTunnelCt0Bandwidth | 0 | 0 | The bandwidth of Class-Type 0 (CT0) in this tunnel, in kbit/s. If all CT bandwidths are 0s, it means that this tunnel's Class-Ty… |
1.3.6.1.4.1.2011.5.25.121.1.1.1.21 | hwMplsTunnelCt1Bandwidth | 0 | 0 | The bandwidth of Class-Type 1 (CT1) in this tunnel, in kbit/s. Unit: kbit/s |
1.3.6.1.4.1.2011.5.25.121.1.1.1.22 | hwMplsTunnelCt2Bandwidth | 0 | 0 | The bandwidth of Class-Type 2 (CT2) in this tunnel, in kbit/s. Unit: kbit/s |
1.3.6.1.4.1.2011.5.25.121.1.1.1.23 | hwMplsTunnelCt3Bandwidth | 0 | 0 | The bandwidth of Class-Type 3 (CT3) in this tunnel, in kbit/s. Unit: kbit/s |
1.3.6.1.4.1.2011.5.25.121.1.1.1.24 | hwMplsTunnelCt4Bandwidth | 0 | 0 | The bandwidth of Class-Type 4 (CT4) in this tunnel, in kbit/s. Unit: kbit/s |
1.3.6.1.4.1.2011.5.25.121.1.1.1.25 | hwMplsTunnelCt5Bandwidth | 0 | 0 | The bandwidth of Class-Type 5 (CT5) in this tunnel, in kbit/s. Unit: kbit/s |
1.3.6.1.4.1.2011.5.25.121.1.1.1.26 | hwMplsTunnelCt6Bandwidth | 0 | 0 | The bandwidth of Class-Type 6 (CT6) in this tunnel, in kbit/s. Unit: kbit/s |
1.3.6.1.4.1.2011.5.25.121.1.1.1.27 | hwMplsTunnelCt7Bandwidth | 0 | 0 | The bandwidth of Class-Type 7 (CT7) in this tunnel, in kbit/s. Unit: kbit/s |
1.3.6.1.4.1.2011.5.25.121.1.1.1.28 | hwMplsTunnelLspType | 0 | 0 | This object is meaningful only at the ingress of the tunnel. It indicates LSP types. Options: 0. invalid(0) -indicates that the L… |
1.3.6.1.4.1.2011.5.25.121.1.1.1.29 | hwMplsTunnelInterfaceName | 0 | 0 | Indicates the tunnel interface name. The object is only valid at the ingress. |
1.3.6.1.4.1.2011.5.25.121.1.1.1.30 | hwMplsTunnelSignalProto | 0 | 0 | Indicates the signal protocol of this tunnel |
1.3.6.1.4.1.2011.5.25.121.1.1.1.31 | hwMplsTunnelType | 0 | 0 | This object is meaningful only at the ingress of the tunnel. It indicates tunnel types. Options: 1. invalid(1) -indicates that th… |