Indicates the ingress LSR ID of this tunnel.
When the MPLS signalling protocol
is rsvp(2), this value equals to the Tunnel
Sender Address in the Sender Template object and may
equal to the Extended Tunnel ID in the
SESSION object. When the MPLS signalling protocol is
crldp(3), this value equals to the Ingress
LSR Router ID in the LSPID TLV object.
Reference to MPLS-TE-STD-MIB.
Parsed from file HUAWEI-MPLS-EXTEND-MIB.mib.txt
Company: huawei
Module: HUAWEI-MPLS-EXTEND-MIB
hwMplsTunnelIngressLSRId OBJECT-TYPE SYNTAX MplsExtendedTunnelId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the ingress LSR ID of this tunnel. When the MPLS signalling protocol is rsvp(2), this value equals to the Tunnel Sender Address in the Sender Template object and may equal to the Extended Tunnel ID in the SESSION object. When the MPLS signalling protocol is crldp(3), this value equals to the Ingress LSR Router ID in the LSPID TLV object. Reference to MPLS-TE-STD-MIB." ::= { hwMplsTunnelEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.1 | hwMplsTunnelIndex | 0 | 0 | Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. When the MPLS signalling protocol is rsv… |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.2 | hwMplsTunnelInstance | 0 | 0 | Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is used to identify multiple … |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.4 | hwMplsTunnelEgressLSRId | 0 | 0 | Indicates the egress LSR ID of this tunnel. Reference to MPLS-TE-STD-MIB. |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.5 | hwMplsTunnelClassType | 0 | 0 | Indicates the bandwidth type used by this tunnel. Options: 1. bc0(1) -indicates the bandwidth type is bc0. 2. bc1(2) … |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.6 | hwMplsTunnelBandwidth | 0 | 0 | Indicates the bandwidth used by this tunnel. Unit: kbit/s |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.7 | hwMplsTunnelAdminStatus | 0 | 0 | Indicates the management status of this tunnel.Reference to MPLS-TE-STD-MIB. Options: 1. up(1) -indicates the management stat… |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.8 | hwMplsTunnelOperStatus | 0 | 0 | Indicates the actual operational status of this tunnel, which is but not limited to the status of this tunnel of a certain period… |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.9 | hwMplsTunnelSessionAttr | 0 | 0 | Indicates protection types desired by the primary tunnel, such as node protection, link protection or bandwidth protection. Option… |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.10 | hwMplsTunnelFrrSetupPrio | 0 | 0 | Indicates the setup PRI of auto-bypass tunnel. Range: 0-7 Default: 7 |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.11 | hwMplsTunnelFrrHoldingPrio | 0 | 0 | Indicates the holding PRI of auto-bypass tunnel. Range: 0-7 Default: 7 |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.12 | hwMplsTunnelFrrBandwidth | 0 | 0 | Indicates the protecting bandwidth of auto-bypass tunnel. Its value is defined by the configuration on the primary tunnel. Unit: k… |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.13 | hwMplsTunnelFrrSwitchover | 0 | 0 | Indicates FRR switching times |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.14 | hwMplsTunnelFrrBypassTableIndex | 0 | 0 | Indicates the index of the bypass tunnel table, that is, the LSP ID of the bypass tunnel. The bypass table shows interfaces prote… |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.15 | hwMplsTunnelFrrARHopTableIndex | 0 | 0 | Indicates the table index of the protection type adopted by each hop of the primary tunnel. |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.16 | hwMplsTunnelName | 0 | 0 | Indicates the tunnel name. The name can refer to the tunnel on the console port of the LSR. If mplsTunnelIsIf is set to True, the… |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.17 | hwMplsTunnelIfIndex | 0 | 0 | Indicates the interface index of the tunnel. It uniquely identifies the tunnel name. |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.18 | hwMplsTunnelPreBandwidth | 0 | 0 | Indicates the original bandwidth of the tunnel when the tunnel is in the Modify state. Unit: kbit/s |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.19 | hwMplsTunnelNextBandwidth | 0 | 0 | Indicates the bandwidth of the tunnel that is to be changed when the tunnel is in the Modify state. Unit: kbit/s |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.20 | hwMplsTunnelCt0Bandwidth | 0 | 0 | The bandwidth of Class-Type 0 (CT0) in this tunnel, in kbit/s. If all CT bandwidths are 0s, it means that this tunnel's Class-Ty… |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.21 | hwMplsTunnelCt1Bandwidth | 0 | 0 | The bandwidth of Class-Type 1 (CT1) in this tunnel, in kbit/s. Unit: kbit/s |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.22 | hwMplsTunnelCt2Bandwidth | 0 | 0 | The bandwidth of Class-Type 2 (CT2) in this tunnel, in kbit/s. Unit: kbit/s |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.23 | hwMplsTunnelCt3Bandwidth | 0 | 0 | The bandwidth of Class-Type 3 (CT3) in this tunnel, in kbit/s. Unit: kbit/s |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.24 | hwMplsTunnelCt4Bandwidth | 0 | 0 | The bandwidth of Class-Type 4 (CT4) in this tunnel, in kbit/s. Unit: kbit/s |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.25 | hwMplsTunnelCt5Bandwidth | 0 | 0 | The bandwidth of Class-Type 5 (CT5) in this tunnel, in kbit/s. Unit: kbit/s |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.26 | hwMplsTunnelCt6Bandwidth | 0 | 0 | The bandwidth of Class-Type 6 (CT6) in this tunnel, in kbit/s. Unit: kbit/s |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.27 | hwMplsTunnelCt7Bandwidth | 0 | 0 | The bandwidth of Class-Type 7 (CT7) in this tunnel, in kbit/s. Unit: kbit/s |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.28 | hwMplsTunnelLspType | 0 | 0 | This object is meaningful only at the ingress of the tunnel. It indicates LSP types. Options: 0. invalid(0) -indicates that the L… |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.29 | hwMplsTunnelInterfaceName | 0 | 0 | Indicates the tunnel interface name. The object is only valid at the ingress. |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.30 | hwMplsTunnelSignalProto | 0 | 0 | Indicates the signal protocol of this tunnel |
| 1.3.6.1.4.1.2011.5.25.121.1.1.1.31 | hwMplsTunnelType | 0 | 0 | This object is meaningful only at the ingress of the tunnel. It indicates tunnel types. Options: 1. invalid(1) -indicates that th… |