This object indicates the configuration or deletion of the MTU signaling function.
By default, the MTU signaling function is enabled, and the MTU TLV type in the LDP message is 0x900.
Parsed from file HUAWEI-MPLSLDP-MIB.mib.txt
Company: huawei
Module: HUAWEI-MPLSLDP-MIB
hwLdpMtuSignaling OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the configuration or deletion of the MTU signaling function. By default, the MTU signaling function is enabled, and the MTU TLV type in the LDP message is 0x900. " ::= { hwMplsLdpInfo 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.143.1.1 | hwMplsLdpProcessName | 0 | 0 | This object indicates the process name of LDP running on the router. By default, the value is LDP. |
| 1.3.6.1.4.1.2011.5.25.143.1.2 | hwMplsLdpLspFec | 0 | 0 | This object indicates the destination address of an LSP. The value is either a destination IP address or a prefix of an IP addre… |
| 1.3.6.1.4.1.2011.5.25.143.1.3 | hwMplsLdpLspInLabel | 0 | 0 | This object indicates that labels are pushed into all the packets for direct MPLS forwarding. |
| 1.3.6.1.4.1.2011.5.25.143.1.4 | hwMplsLdpLspOutLabel | 0 | 0 | This object indicates that all the packets swap labels for MPLS forwarding. |
| 1.3.6.1.4.1.2011.5.25.143.1.5 | hwMplsLdpLspOutIfIndex | 0 | 0 | The value of this object identifies the index of the outgoing interface of the LSP. |
| 1.3.6.1.4.1.2011.5.25.143.1.6 | hwMplsLdpLspDownReason | 0 | 0 | This object indicates the cause that the LSP becomes Down. Options: 1. routeDelete(1) -indicates that a route has been d… |
| 1.3.6.1.4.1.2011.5.25.143.1.7 | hwMplsLdpSessionTable | 1 | 5 | Table containing the session parameters and session age. The index of this table is hwMplsLdpSessionPeerLsrId. |
| 1.3.6.1.4.1.2011.5.25.143.1.8 | hwMplsLdpSessionStateTable | 1 | 17 | This table is used to display the detailed state parameters of the session. The index of this table is hwMplsLdpSessionPeerId. |
| 1.3.6.1.4.1.2011.5.25.143.1.9 | hwLdpCapabilityConfig | 0 | 0 | This object indicates the global configuration or deletion of the LDP capability. Before enabling LDP capability, ensure that th… |
| 1.3.6.1.4.1.2011.5.25.143.1.10 | hwLdpLsrId | 0 | 0 | This object indicates the way to change the LDP LSR ID. The default LDP LSR ID has the same value as the MPLS LSR ID. It is recom… |
| 1.3.6.1.4.1.2011.5.25.143.1.11 | hwLdpPropagateIpPrefix | 0 | 0 | This object indicates the configuration or deletion of the transit policy for the LDP. The object has a valid length ranging fro… |
| 1.3.6.1.4.1.2011.5.25.143.1.12 | hwLdpGlobalRemotePwe3 | 0 | 0 | This object indicates the configuration or deletion of the policy for the LDP remote session. When the object is enabled, it is … |
| 1.3.6.1.4.1.2011.5.25.143.1.14 | hwLdpMtuApplyTlv | 0 | 0 | This object conflicts with the object hwLdpMtuSignaling. If the object is enabled, it indicates that the MTU TLV type in the LDP… |
| 1.3.6.1.4.1.2011.5.25.143.1.15 | hwLdpGrCapabilityConfig | 0 | 0 | This object indicates the configuration or deletion of the LDP GR capability. |
| 1.3.6.1.4.1.2011.5.25.143.1.16 | hwLdpGrNeighborLivenessTimer | 0 | 0 | This object indicates the way to configure the value of GR neighbor life timer. Default: 600 Unit: seconds |
| 1.3.6.1.4.1.2011.5.25.143.1.17 | hwLdpGrReconnectTimer | 0 | 0 | This object indicates the way to configure the value of GR reconnect timer. Default: 300 Unit: seconds |
| 1.3.6.1.4.1.2011.5.25.143.1.18 | hwLdpGrRecoveryTimer | 0 | 0 | This object indicates the way to configure the value of GR recovery timer. Default: 300 Unit: seconds |
| 1.3.6.1.4.1.2011.5.25.143.1.19 | hwMplsLspTrigger | 0 | 0 | This object indicates the way to configure the LDP policy for the ingress LSP and egress LSP. Options: 1. all(1) -indicates … |
| 1.3.6.1.4.1.2011.5.25.143.1.20 | hwMplsLspTriggerIpPrefix | 0 | 0 | This object indicates the IP prefix when configuring the LDP policy for the ingress LSP and egress LSP. |
| 1.3.6.1.4.1.2011.5.25.143.1.21 | hwMplsLspTriggerBgpRoute | 0 | 0 | This object indicates the policy of triggering the BGP route to create the LDP LSP. Default: disabled |
| 1.3.6.1.4.1.2011.5.25.143.1.22 | hwMplsLspTriggerBgpRouteIpPrefix | 0 | 0 | This object indicates the IP prefix when triggering the BGP route to create the LDP LSP. |
| 1.3.6.1.4.1.2011.5.25.143.1.23 | hwLdpReset | 0 | 0 | This object indicates the reset of the LDP protocol. Options: 1. reset(1) -indicates the reset of the LDP protocol. 2. resetall… |
| 1.3.6.1.4.1.2011.5.25.143.1.24 | hwLdpOutBoundSplitHorizonAll | 0 | 0 | This object indicates the way to set the flag of global split horizon. Default: disabled |
| 1.3.6.1.4.1.2011.5.25.143.1.25 | hwLdpDeleteGtsmAll | 0 | 0 | This object indicates the deletion of the global GTSM configurations. 1.delete(1) -indicates that global GTSM configurations are… |
| 1.3.6.1.4.1.2011.5.25.143.1.26 | hwMplsFrrLspTrigger | 0 | 0 | This object indicates the way to configure the LDP policy of global instance for LDP Auto FRR. Options: 1. all(1) -indicates… |
| 1.3.6.1.4.1.2011.5.25.143.1.27 | hwMplsFrrLspTriggerIpPrefix | 0 | 0 | This object indicates the IP prefix when configuring LDP Auto FRR for the public network instance. |
| 1.3.6.1.4.1.2011.5.25.143.1.28 | hwLdpBackOffTimerInit | 0 | 0 | This object indicates the initial value of backoff timer. Default: 15 Unit: seconds |
| 1.3.6.1.4.1.2011.5.25.143.1.29 | hwLdpBackOffTimerMax | 0 | 0 | This object indicates the maximum value of backoff timer. Default: 120 Unit: seconds |
| 1.3.6.1.4.1.2011.5.25.143.1.30 | hwLdpLongestMatch | 0 | 0 | This object indicates that the LDP is enabled with the function of searching for routes according to the longest match rule to … |
| 1.3.6.1.4.1.2011.5.25.143.1.37 | hwLdpRemotePeerAutoDodRequest | 0 | 0 | The value of this object identifies whether the remote peer is globally enabled with the capability of automatically sending a … |
| 1.3.6.1.4.1.2011.5.25.143.1.38 | hwLdpCapabilityAnnouncementConfig | 0 | 0 | The value of this object identifies whether LDP has Capability-Announcement ability. |
| 1.3.6.1.4.1.2011.5.25.143.1.50 | hwLdpVpnTable | 1 | 8 | This table is used to configure or delete the LDP multi-instance. The index of this table is hwLdpVpnInstanceId. |
| 1.3.6.1.4.1.2011.5.25.143.1.51 | hwLdpRemoteEntityTable | 1 | 13 | This table is used to configure or delete the LDP remote peer. The index of this table is hwLdpRemoteName. |
| 1.3.6.1.4.1.2011.5.25.143.1.52 | hwLdpPeerTable | 1 | 15 | This table is used to configure the LDP peer. The index of this table is hwLdpPeerLsrId. |
| 1.3.6.1.4.1.2011.5.25.143.1.53 | hwLdpVpnPeerTable | 1 | 8 | This table is used to create and delete peer configurations in the LDP multi-instance. The indexs of this table are hwLdpVpnInst… |
| 1.3.6.1.4.1.2011.5.25.143.1.54 | hwLdpInterfaceTable | 1 | 11 | This table is used to configure or delete the LDP capability on the interface. The index of this table is hwLdpInterfaceIndex. |
| 1.3.6.1.4.1.2011.5.25.143.1.58 | hwLdpPeerGroupTable | 1 | 9 | This table is used to configure an LDP peer group. |
| 1.3.6.1.4.1.2011.5.25.143.1.59 | hwLdpOutBoundPolicyPeerAllRange | 0 | 0 | This object indicates the range of IGP routes for a global outbound LDP policy. The default value is all. |
| 1.3.6.1.4.1.2011.5.25.143.1.60 | hwLdpOutBoundPolicyPeerAllFecIpPrefix | 0 | 0 | This object indicates the IP prefix list name of IGP routes for a global outbound LDP policy. The default value is NULL. |
| 1.3.6.1.4.1.2011.5.25.143.1.61 | hwLdpOutBoundPolicyPeerAllBgpRange | 0 | 0 | This object indicates the range of BGP routes for a global outbound LDP policy. The default value is all. |
| 1.3.6.1.4.1.2011.5.25.143.1.62 | hwLdpOutBoundPolicyPeerAllBgpIpPrefix | 0 | 0 | This object indicates the IP prefix list name of BGP routes for a global outbound LDP policy. The default value is NULL. |
| 1.3.6.1.4.1.2011.5.25.143.1.63 | hwLdpInBoundPolicyPeerAllRange | 0 | 0 | This object indicates the range of routes for a global inbound LDP policy. The default value is all. |
| 1.3.6.1.4.1.2011.5.25.143.1.64 | hwLdpInBoundPolicyPeerAllIpPrefix | 0 | 0 | This object indicates the IP prefix list name of routes for a global inbound LDP policy. The default value is NULL. |