This table is used to configure or delete the LDP remote peer.
The index of this table is hwLdpRemoteName.
Parsed from file HUAWEI-MPLSLDP-MIB.mib.txt
Company: huawei
Module: HUAWEI-MPLSLDP-MIB
hwLdpRemoteEntityTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLdpRemoteEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure or delete the LDP remote peer. The index of this table is hwLdpRemoteName. " ::= { hwMplsLdpInfo 51 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.143.1.51.1 | hwLdpRemoteEntityEntry | 12 | 12 | An entry of the remote peer table, used to configure and display some features negotiated with the remote peer. The index of thi… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.143.1.1 | hwMplsLdpProcessName | 0 | 0 | This object indicates the process name of LDP running on the router. By default, the value is LDP. |
| 1.3.6.1.4.1.2011.5.25.143.1.2 | hwMplsLdpLspFec | 0 | 0 | This object indicates the destination address of an LSP. The value is either a destination IP address or a prefix of an IP addre… |
| 1.3.6.1.4.1.2011.5.25.143.1.3 | hwMplsLdpLspInLabel | 0 | 0 | This object indicates that labels are pushed into all the packets for direct MPLS forwarding. |
| 1.3.6.1.4.1.2011.5.25.143.1.4 | hwMplsLdpLspOutLabel | 0 | 0 | This object indicates that all the packets swap labels for MPLS forwarding. |
| 1.3.6.1.4.1.2011.5.25.143.1.5 | hwMplsLdpLspOutIfIndex | 0 | 0 | The value of this object identifies the index of the outgoing interface of the LSP. |
| 1.3.6.1.4.1.2011.5.25.143.1.6 | hwMplsLdpLspDownReason | 0 | 0 | This object indicates the cause that the LSP becomes Down. Options: 1. routeDelete(1) -indicates that a route has been d… |
| 1.3.6.1.4.1.2011.5.25.143.1.7 | hwMplsLdpSessionTable | 1 | 5 | Table containing the session parameters and session age. The index of this table is hwMplsLdpSessionPeerLsrId. |
| 1.3.6.1.4.1.2011.5.25.143.1.8 | hwMplsLdpSessionStateTable | 1 | 17 | This table is used to display the detailed state parameters of the session. The index of this table is hwMplsLdpSessionPeerId. |
| 1.3.6.1.4.1.2011.5.25.143.1.9 | hwLdpCapabilityConfig | 0 | 0 | This object indicates the global configuration or deletion of the LDP capability. Before enabling LDP capability, ensure that th… |
| 1.3.6.1.4.1.2011.5.25.143.1.10 | hwLdpLsrId | 0 | 0 | This object indicates the way to change the LDP LSR ID. The default LDP LSR ID has the same value as the MPLS LSR ID. It is recom… |
| 1.3.6.1.4.1.2011.5.25.143.1.11 | hwLdpPropagateIpPrefix | 0 | 0 | This object indicates the configuration or deletion of the transit policy for the LDP. The object has a valid length ranging fro… |
| 1.3.6.1.4.1.2011.5.25.143.1.12 | hwLdpGlobalRemotePwe3 | 0 | 0 | This object indicates the configuration or deletion of the policy for the LDP remote session. When the object is enabled, it is … |
| 1.3.6.1.4.1.2011.5.25.143.1.13 | hwLdpMtuSignaling | 0 | 0 | This object indicates the configuration or deletion of the MTU signaling function. By default, the MTU signaling function is ena… |
| 1.3.6.1.4.1.2011.5.25.143.1.14 | hwLdpMtuApplyTlv | 0 | 0 | This object conflicts with the object hwLdpMtuSignaling. If the object is enabled, it indicates that the MTU TLV type in the LDP… |
| 1.3.6.1.4.1.2011.5.25.143.1.15 | hwLdpGrCapabilityConfig | 0 | 0 | This object indicates the configuration or deletion of the LDP GR capability. |
| 1.3.6.1.4.1.2011.5.25.143.1.16 | hwLdpGrNeighborLivenessTimer | 0 | 0 | This object indicates the way to configure the value of GR neighbor life timer. Default: 600 Unit: seconds |
| 1.3.6.1.4.1.2011.5.25.143.1.17 | hwLdpGrReconnectTimer | 0 | 0 | This object indicates the way to configure the value of GR reconnect timer. Default: 300 Unit: seconds |
| 1.3.6.1.4.1.2011.5.25.143.1.18 | hwLdpGrRecoveryTimer | 0 | 0 | This object indicates the way to configure the value of GR recovery timer. Default: 300 Unit: seconds |
| 1.3.6.1.4.1.2011.5.25.143.1.19 | hwMplsLspTrigger | 0 | 0 | This object indicates the way to configure the LDP policy for the ingress LSP and egress LSP. Options: 1. all(1) -indicates … |
| 1.3.6.1.4.1.2011.5.25.143.1.20 | hwMplsLspTriggerIpPrefix | 0 | 0 | This object indicates the IP prefix when configuring the LDP policy for the ingress LSP and egress LSP. |
| 1.3.6.1.4.1.2011.5.25.143.1.21 | hwMplsLspTriggerBgpRoute | 0 | 0 | This object indicates the policy of triggering the BGP route to create the LDP LSP. Default: disabled |
| 1.3.6.1.4.1.2011.5.25.143.1.22 | hwMplsLspTriggerBgpRouteIpPrefix | 0 | 0 | This object indicates the IP prefix when triggering the BGP route to create the LDP LSP. |
| 1.3.6.1.4.1.2011.5.25.143.1.23 | hwLdpReset | 0 | 0 | This object indicates the reset of the LDP protocol. Options: 1. reset(1) -indicates the reset of the LDP protocol. 2. resetall… |
| 1.3.6.1.4.1.2011.5.25.143.1.24 | hwLdpOutBoundSplitHorizonAll | 0 | 0 | This object indicates the way to set the flag of global split horizon. Default: disabled |
| 1.3.6.1.4.1.2011.5.25.143.1.25 | hwLdpDeleteGtsmAll | 0 | 0 | This object indicates the deletion of the global GTSM configurations. 1.delete(1) -indicates that global GTSM configurations are… |
| 1.3.6.1.4.1.2011.5.25.143.1.26 | hwMplsFrrLspTrigger | 0 | 0 | This object indicates the way to configure the LDP policy of global instance for LDP Auto FRR. Options: 1. all(1) -indicates… |
| 1.3.6.1.4.1.2011.5.25.143.1.27 | hwMplsFrrLspTriggerIpPrefix | 0 | 0 | This object indicates the IP prefix when configuring LDP Auto FRR for the public network instance. |
| 1.3.6.1.4.1.2011.5.25.143.1.28 | hwLdpBackOffTimerInit | 0 | 0 | This object indicates the initial value of backoff timer. Default: 15 Unit: seconds |
| 1.3.6.1.4.1.2011.5.25.143.1.29 | hwLdpBackOffTimerMax | 0 | 0 | This object indicates the maximum value of backoff timer. Default: 120 Unit: seconds |
| 1.3.6.1.4.1.2011.5.25.143.1.30 | hwLdpLongestMatch | 0 | 0 | This object indicates that the LDP is enabled with the function of searching for routes according to the longest match rule to … |
| 1.3.6.1.4.1.2011.5.25.143.1.37 | hwLdpRemotePeerAutoDodRequest | 0 | 0 | The value of this object identifies whether the remote peer is globally enabled with the capability of automatically sending a … |
| 1.3.6.1.4.1.2011.5.25.143.1.38 | hwLdpCapabilityAnnouncementConfig | 0 | 0 | The value of this object identifies whether LDP has Capability-Announcement ability. |
| 1.3.6.1.4.1.2011.5.25.143.1.50 | hwLdpVpnTable | 1 | 8 | This table is used to configure or delete the LDP multi-instance. The index of this table is hwLdpVpnInstanceId. |
| 1.3.6.1.4.1.2011.5.25.143.1.52 | hwLdpPeerTable | 1 | 15 | This table is used to configure the LDP peer. The index of this table is hwLdpPeerLsrId. |
| 1.3.6.1.4.1.2011.5.25.143.1.53 | hwLdpVpnPeerTable | 1 | 8 | This table is used to create and delete peer configurations in the LDP multi-instance. The indexs of this table are hwLdpVpnInst… |
| 1.3.6.1.4.1.2011.5.25.143.1.54 | hwLdpInterfaceTable | 1 | 11 | This table is used to configure or delete the LDP capability on the interface. The index of this table is hwLdpInterfaceIndex. |
| 1.3.6.1.4.1.2011.5.25.143.1.58 | hwLdpPeerGroupTable | 1 | 9 | This table is used to configure an LDP peer group. |
| 1.3.6.1.4.1.2011.5.25.143.1.59 | hwLdpOutBoundPolicyPeerAllRange | 0 | 0 | This object indicates the range of IGP routes for a global outbound LDP policy. The default value is all. |
| 1.3.6.1.4.1.2011.5.25.143.1.60 | hwLdpOutBoundPolicyPeerAllFecIpPrefix | 0 | 0 | This object indicates the IP prefix list name of IGP routes for a global outbound LDP policy. The default value is NULL. |
| 1.3.6.1.4.1.2011.5.25.143.1.61 | hwLdpOutBoundPolicyPeerAllBgpRange | 0 | 0 | This object indicates the range of BGP routes for a global outbound LDP policy. The default value is all. |
| 1.3.6.1.4.1.2011.5.25.143.1.62 | hwLdpOutBoundPolicyPeerAllBgpIpPrefix | 0 | 0 | This object indicates the IP prefix list name of BGP routes for a global outbound LDP policy. The default value is NULL. |
| 1.3.6.1.4.1.2011.5.25.143.1.63 | hwLdpInBoundPolicyPeerAllRange | 0 | 0 | This object indicates the range of routes for a global inbound LDP policy. The default value is all. |
| 1.3.6.1.4.1.2011.5.25.143.1.64 | hwLdpInBoundPolicyPeerAllIpPrefix | 0 | 0 | This object indicates the IP prefix list name of routes for a global inbound LDP policy. The default value is NULL. |