The value of this object identifies the mode of authenticating Level-1 Hello PDUs:
null(0): indicates that area-based authentication is not configured.
md5(1): indicates that the password is encrypted through MD5 and then sent.
simple(2): indicates that the password is sent in plaintext.
keychain(3): indicates that the key-chain that varies with the time is encrypted through MD5 and then sent.
By default, area-based authentication is not configured.
Parsed from file HUAWEI-ISIS-CONF-MIB.mib.txt
Company: huawei
Module: HUAWEI-ISIS-CONF-MIB
hwIsisCircL1AuthMode OBJECT-TYPE SYNTAX INTEGER { null(0), md5(1), simple(2), keychain(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies the mode of authenticating Level-1 Hello PDUs: null(0): indicates that area-based authentication is not configured. md5(1): indicates that the password is encrypted through MD5 and then sent. simple(2): indicates that the password is sent in plaintext. keychain(3): indicates that the key-chain that varies with the time is encrypted through MD5 and then sent. By default, area-based authentication is not configured. " DEFVAL { 0 } ::= { hwIsisIntfBaseEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.1 | hwIsisInterfaceIndex | 0 | 0 | The value of this object identifies the interface index. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.2 | hwIsisEnableIPProtocol | 0 | 0 | The value of this object identifies the status of IPv4 IS-IS on an interface: enable(1): enables IPv4 IS-IS. disable(2): disables… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.3 | hwIsisEnableIPv6Protocol | 0 | 0 | The value of this object identifies the status of IPv6 IS-IS on an interface: enable(1): enables IPv6 IS-IS. disable(2): disables… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.4 | hwIsisCircLevel | 0 | 0 | The value of this object identifies the level of an interface: level1(1): indicates Level-1. level2(2): indicates Level-2. level12… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.5 | hwIsisCircSimulation | 0 | 0 | The value of this object identifies whether the broadcast interface is simulated as a P2P interface: enable(1): indicates that t… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.6 | hwIsisCircL1HelloInterval | 0 | 0 | The value of this object identifies the interval for sending Level-1 Hello PDUs. The value ranges from 3 to 255, in seconds. By … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.7 | hwIsisCircL2HelloInterval | 0 | 0 | The value of this object identifies the interval for sending Level-2 Hello PDUs. The value ranges from 3 to 255, in seconds. By … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.8 | hwIsisCircL1HelloMultiplier | 0 | 0 | The value of this object identifies the number of Level-1 Hello PDUs that fail to received from the IS-IS neighbor before the n… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.9 | hwIsisCircL2HelloMultiplier | 0 | 0 | The value of this object identifies the number of Level-2 Hello PDUs that fail to received from the IS-IS neighbor before the n… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.11 | hwIsisCircL1AuthText | 0 | 0 | The value of this object identifies the authentication password of Level-1 Hello packets. The password is a string of character… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.12 | hwIsisCircL1AuthSendOnly | 0 | 0 | The value of this object identifies the mode of sending the authentication password of Level-1 Hello PDUs: true(1): indicates th… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.13 | hwIsisCircL1AuthCode | 0 | 0 | The value of this object identifies the authentication code of Level-1 Hello PDUs: none(0): indicates that no authentication is … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.14 | hwIsisCircL2AuthMode | 0 | 0 | The value of this object identifies the mode of authenticating Level-2 Hello PDUs: null(0): indicates that area-based authentica… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.15 | hwIsisCircL2AuthText | 0 | 0 | The value of this object identifies the authentication password of Level-2 Hello packets. The password is a string of character… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.16 | hwIsisCircL2AuthSendOnly | 0 | 0 | The value of this object identifies the mode of sending the authentication password of Level-2 Hello PDUs: true(1): indicates th… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.17 | hwIsisCircL2AuthCode | 0 | 0 | The value of this object identifies the authentication code of Level-2 Hello PDUs: none(0): indicates that no authentication is … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.18 | hwIsisCircLdpSync | 0 | 0 | The value of this object identifies the status of synchronization of IS-IS and LDP: enable(1): enables synchronization of IS-IS … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.19 | hwIsisCircLdpSyncHoldDown | 0 | 0 | The value of this object identifies the timeout period of the Holddown time for synchronization of IS-IS and LDP. The value rang… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.20 | hwIsisCircLdpHldMaxCost | 0 | 0 | The value of this object identifies the timeout period of the Hold-Max-Cost time for synchronization of IS-IS and LDP. The value… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.21 | hwIsisCircSmallHello | 0 | 0 | The value of this object identifies whether IS-IS sends small Hello PDUs without the padding field: enable(1): indicates that IS… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.22 | hwIsisCircIpIgnore | 0 | 0 | The value of this object identifies whether the segment in an IP address is checked: enable(1): indicates that the segment in an… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.23 | hwIsisCircSenseRpr | 0 | 0 | The value of this object identifies whether fast RPR loop detection is enabled: enable(1): enables fast RPR loop detection. disab… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.24 | hwIsisCircPadHello | 0 | 0 | The value of this object identifies whether IS-IS sends standard Hello PDUs with the padding field: enable(1): indicates that IS… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.25 | hwIsisCircLspRetransInterval | 0 | 0 | The value of this object identifies the interval for resending LSPs. The value ranges from 1 to 300, in seconds. The default val… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.26 | hwIsisL1CsnpTimerValue | 0 | 0 | The value of this object identifies the interval for sending Level-1 CSNP PDUs on an interface. The value ranges from 1 to 65535… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.27 | hwIsisL2CsnpTimerValue | 0 | 0 | The value of this object identifies the interval for sending Level-2 CSNP PDUs on an interface. The value ranges from 1 to 65535… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.28 | hwIsisLspThrottleInterval | 0 | 0 | The value of this object identifies the interval for sending batch of LSPs or CSNPs on an interface. The value ranges from 1 to… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.29 | hwIsisLspThrottleCount | 0 | 0 | The value of this object identifies the number of a bundle of LSPs. The value ranges from 1 to 1000. By default, it is 10. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.30 | hwIsisCircL1DisPriority | 0 | 0 | The value of this object identifies the priority of the Level-1 DIS, which is valid only on a broadcast interface. The value ran… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.31 | hwIsisCircL2DisPriority | 0 | 0 | The value of this object identifies the priority of the Level-2 DIS, which is valid only on a broadcast interface. The value ran… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.32 | hwIsisCircSilent | 0 | 0 | The value of this object identifies whether the status of an IS-IS interface is set to silent. enable(1): indicates that the sta… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.33 | hwIsisCircMeshGroup | 0 | 0 | The value of this object identifies the mesh-group ID. The value ranges from 0 to 4294967295. Value 0 indicates that the mesh-g… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.34 | hwIsisCircMeshBlock | 0 | 0 | The value of this object identifies the mesh block function. If this function is configured, the set mesh-group ID is deleted. … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.35 | hwIsisCircDisName | 0 | 0 | The value of this object identifies the DIS name of an interface. The configuration is applicable to only a broadcast interface.… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.36 | hwIsisCircPppNego | 0 | 0 | The value of this object identifies the mode of negotiating the setup of a neighbor relationship on P2P interfaces: none(0): ind… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.37 | hwIsisCircPppOsicpCheck | 0 | 0 | The value of this object identifies whether the OSICP check is required: enable(1): enables the OSICP check. disable(2): disables… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.38 | hwIsisIntfRowStatus | 0 | 0 | The value of this object identifies the setting of two values: createAndGo(4): creates one row. destroy(6): deletes one row. |