The value of this object identifies whether the segment in an IP address is checked:
enable(1): indicates that the segment in an IP address is not checked.
disable(2): indicates that the segment in an IP address is checked.
By default, the segment in an IP address is checked.
This object applies to only P2P interfaces.
Parsed from file HUAWEI-ISIS-CONF-MIB.mib.txt
Company: huawei
Module: HUAWEI-ISIS-CONF-MIB
hwIsisCircIpIgnore OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object identifies whether the segment in an IP address is checked: enable(1): indicates that the segment in an IP address is not checked. disable(2): indicates that the segment in an IP address is checked. By default, the segment in an IP address is checked. This object applies to only P2P interfaces. " ::= { hwIsisIntfBaseEntry 22 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.1 | hwIsisInterfaceIndex | 0 | 0 | The value of this object identifies the interface index. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.2 | hwIsisEnableIPProtocol | 0 | 0 | The value of this object identifies the status of IPv4 IS-IS on an interface: enable(1): enables IPv4 IS-IS. disable(2): disables… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.3 | hwIsisEnableIPv6Protocol | 0 | 0 | The value of this object identifies the status of IPv6 IS-IS on an interface: enable(1): enables IPv6 IS-IS. disable(2): disables… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.4 | hwIsisCircLevel | 0 | 0 | The value of this object identifies the level of an interface: level1(1): indicates Level-1. level2(2): indicates Level-2. level12… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.5 | hwIsisCircSimulation | 0 | 0 | The value of this object identifies whether the broadcast interface is simulated as a P2P interface: enable(1): indicates that t… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.6 | hwIsisCircL1HelloInterval | 0 | 0 | The value of this object identifies the interval for sending Level-1 Hello PDUs. The value ranges from 3 to 255, in seconds. By … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.7 | hwIsisCircL2HelloInterval | 0 | 0 | The value of this object identifies the interval for sending Level-2 Hello PDUs. The value ranges from 3 to 255, in seconds. By … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.8 | hwIsisCircL1HelloMultiplier | 0 | 0 | The value of this object identifies the number of Level-1 Hello PDUs that fail to received from the IS-IS neighbor before the n… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.9 | hwIsisCircL2HelloMultiplier | 0 | 0 | The value of this object identifies the number of Level-2 Hello PDUs that fail to received from the IS-IS neighbor before the n… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.10 | hwIsisCircL1AuthMode | 0 | 0 | The value of this object identifies the mode of authenticating Level-1 Hello PDUs: null(0): indicates that area-based authentica… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.11 | hwIsisCircL1AuthText | 0 | 0 | The value of this object identifies the authentication password of Level-1 Hello packets. The password is a string of character… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.12 | hwIsisCircL1AuthSendOnly | 0 | 0 | The value of this object identifies the mode of sending the authentication password of Level-1 Hello PDUs: true(1): indicates th… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.13 | hwIsisCircL1AuthCode | 0 | 0 | The value of this object identifies the authentication code of Level-1 Hello PDUs: none(0): indicates that no authentication is … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.14 | hwIsisCircL2AuthMode | 0 | 0 | The value of this object identifies the mode of authenticating Level-2 Hello PDUs: null(0): indicates that area-based authentica… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.15 | hwIsisCircL2AuthText | 0 | 0 | The value of this object identifies the authentication password of Level-2 Hello packets. The password is a string of character… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.16 | hwIsisCircL2AuthSendOnly | 0 | 0 | The value of this object identifies the mode of sending the authentication password of Level-2 Hello PDUs: true(1): indicates th… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.17 | hwIsisCircL2AuthCode | 0 | 0 | The value of this object identifies the authentication code of Level-2 Hello PDUs: none(0): indicates that no authentication is … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.18 | hwIsisCircLdpSync | 0 | 0 | The value of this object identifies the status of synchronization of IS-IS and LDP: enable(1): enables synchronization of IS-IS … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.19 | hwIsisCircLdpSyncHoldDown | 0 | 0 | The value of this object identifies the timeout period of the Holddown time for synchronization of IS-IS and LDP. The value rang… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.20 | hwIsisCircLdpHldMaxCost | 0 | 0 | The value of this object identifies the timeout period of the Hold-Max-Cost time for synchronization of IS-IS and LDP. The value… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.21 | hwIsisCircSmallHello | 0 | 0 | The value of this object identifies whether IS-IS sends small Hello PDUs without the padding field: enable(1): indicates that IS… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.23 | hwIsisCircSenseRpr | 0 | 0 | The value of this object identifies whether fast RPR loop detection is enabled: enable(1): enables fast RPR loop detection. disab… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.24 | hwIsisCircPadHello | 0 | 0 | The value of this object identifies whether IS-IS sends standard Hello PDUs with the padding field: enable(1): indicates that IS… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.25 | hwIsisCircLspRetransInterval | 0 | 0 | The value of this object identifies the interval for resending LSPs. The value ranges from 1 to 300, in seconds. The default val… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.26 | hwIsisL1CsnpTimerValue | 0 | 0 | The value of this object identifies the interval for sending Level-1 CSNP PDUs on an interface. The value ranges from 1 to 65535… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.27 | hwIsisL2CsnpTimerValue | 0 | 0 | The value of this object identifies the interval for sending Level-2 CSNP PDUs on an interface. The value ranges from 1 to 65535… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.28 | hwIsisLspThrottleInterval | 0 | 0 | The value of this object identifies the interval for sending batch of LSPs or CSNPs on an interface. The value ranges from 1 to… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.29 | hwIsisLspThrottleCount | 0 | 0 | The value of this object identifies the number of a bundle of LSPs. The value ranges from 1 to 1000. By default, it is 10. |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.30 | hwIsisCircL1DisPriority | 0 | 0 | The value of this object identifies the priority of the Level-1 DIS, which is valid only on a broadcast interface. The value ran… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.31 | hwIsisCircL2DisPriority | 0 | 0 | The value of this object identifies the priority of the Level-2 DIS, which is valid only on a broadcast interface. The value ran… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.32 | hwIsisCircSilent | 0 | 0 | The value of this object identifies whether the status of an IS-IS interface is set to silent. enable(1): indicates that the sta… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.33 | hwIsisCircMeshGroup | 0 | 0 | The value of this object identifies the mesh-group ID. The value ranges from 0 to 4294967295. Value 0 indicates that the mesh-g… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.34 | hwIsisCircMeshBlock | 0 | 0 | The value of this object identifies the mesh block function. If this function is configured, the set mesh-group ID is deleted. … |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.35 | hwIsisCircDisName | 0 | 0 | The value of this object identifies the DIS name of an interface. The configuration is applicable to only a broadcast interface.… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.36 | hwIsisCircPppNego | 0 | 0 | The value of this object identifies the mode of negotiating the setup of a neighbor relationship on P2P interfaces: none(0): ind… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.37 | hwIsisCircPppOsicpCheck | 0 | 0 | The value of this object identifies whether the OSICP check is required: enable(1): enables the OSICP check. disable(2): disables… |
| 1.3.6.1.4.1.2011.5.25.24.2.1.21.1.38 | hwIsisIntfRowStatus | 0 | 0 | The value of this object identifies the setting of two values: createAndGo(4): creates one row. destroy(6): deletes one row. |