This object describes how Db Record Change Trap for a given Db Record Type
is being handle by IPMI. For the Db Record Type listed below, IPMI can send
db Record change Trap to EMS via two different mechanism:
(i) Generic Db Interface
(ii) Respective Table Interface
Octet[0] represents the version of the packed format of Db Record Change
Trap Handling Mask described below.
For this release the Version number will be 0x01.
For version equal 0x01 the format of the following octets will be :
Octet[1-2] Bit 15 to 0 of Db Record Change Trap Handling Mask
Where..
Bit 0 corresponds to TR08 Db Record
Bit 1 corresponds to GR303 Db Record
Bit 2 corresponds to Cross-Connect(Ckt-to-Ckt and ATM Virtual Ckt.) Db Record
Bit 3 corresponds to Protection Group Db Record
Bit 4 corresponds to Port Profile Db Record
Bit 5 corresponds to Channel Attribute Db Record
Bit 6 corresponds to V5 (V5 Group and V5 Variant) Db Record
Bit 7 corresponds to Facility Alarm String Db Record
Bit 8 corresponds to TL1 Interface Provisioning Db Record
Bit 9-15 Ignored
For a give Db Record Type if corresponding bit is set to 1, The Db Record Change
Trap for that Db Record Type shall be send through Generic Db Interface,
Otherwise The Db Record Change Trap for that Db Record Type shall be send through
it's own Trap handling mechanism.
Parsed from file umc1000.mib.txt
Company: None
Module: UMC1000-MIB
This object describes how Db Record Change Trap for a given Db Record Type
is being handle by IPMI. For the Db Record Type listed below, IPMI can send
db Record change Trap to EMS via two different mechanism:
(i) Generic Db Interface
(ii) Respective Table Interface
Octet[0] represents the version of the packed format of Db Record Change
Trap Handling Mask described below.
For this release the Version number will be 0x01.
For version equal 0x01 the format of the following octets will be :
Octet[1-2] Bit 15 to 0 of Db Record Change Trap Handling Mask
Where..
Bit 0 corresponds to TR08 Db Record
Bit 1 corresponds to GR303 Db Record
Bit 2 corresponds to Cross-Connect(Ckt-to-Ckt and ATM Virtual Ckt.) Db Record
Bit 3 corresponds to Protection Group Db Record
Bit 4 corresponds to Port Profile Db Record
Bit 5 corresponds to Channel Attribute Db Record
Bit 6 corresponds to V5 (V5 Group and V5 Variant) Db Record
Bit 7 corresponds to Facility Alarm String Db Record
Bit 8 corresponds to TL1 Interface Provisioning Db Record
Bit 9-15 Ignored
For a give Db Record Type if corresponding bit is set to 1, The Db Record Change
Trap for that Db Record Type shall be send through Generic Db Interface,
Otherwise The Db Record Change Trap for that Db Record Type shall be send through
it's own Trap handling mechanism.
Parsed from file UMC1000-MIB.mib
Module: UMC1000-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
umc1DbRecordChangeTrapHandleMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3..3)) ACCESS read-write STATUS mandatory DESCRIPTION "This object describes how Db Record Change Trap for a given Db Record Type is being handle by IPMI. For the Db Record Type listed below, IPMI can send db Record change Trap to EMS via two different mechanism: (i) Generic Db Interface (ii) Respective Table Interface Octet[0] represents the version of the packed format of Db Record Change Trap Handling Mask described below. For this release the Version number will be 0x01. For version equal 0x01 the format of the following octets will be : Octet[1-2] Bit 15 to 0 of Db Record Change Trap Handling Mask Where.. Bit 0 corresponds to TR08 Db Record Bit 1 corresponds to GR303 Db Record Bit 2 corresponds to Cross-Connect(Ckt-to-Ckt and ATM Virtual Ckt.) Db Record Bit 3 corresponds to Protection Group Db Record Bit 4 corresponds to Port Profile Db Record Bit 5 corresponds to Channel Attribute Db Record Bit 6 corresponds to V5 (V5 Group and V5 Variant) Db Record Bit 7 corresponds to Facility Alarm String Db Record Bit 8 corresponds to TL1 Interface Provisioning Db Record Bit 9-15 Ignored For a give Db Record Type if corresponding bit is set to 1, The Db Record Change Trap for that Db Record Type shall be send through Generic Db Interface, Otherwise The Db Record Change Trap for that Db Record Type shall be send through it's own Trap handling mechanism. " DEFVAL { '010100'h } ::= { umc1System 20 }
umc1DbRecordChangeTrapHandleMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(3..3)) ACCESS read-write STATUS mandatory DESCRIPTION "This object describes how Db Record Change Trap for a given Db Record Type is being handle by IPMI. For the Db Record Type listed below, IPMI can send db Record change Trap to EMS via two different mechanism: (i) Generic Db Interface (ii) Respective Table Interface Octet[0] represents the version of the packed format of Db Record Change Trap Handling Mask described below. For this release the Version number will be 0x01. For version equal 0x01 the format of the following octets will be : Octet[1-2] Bit 15 to 0 of Db Record Change Trap Handling Mask Where.. Bit 0 corresponds to TR08 Db Record Bit 1 corresponds to GR303 Db Record Bit 2 corresponds to Cross-Connect(Ckt-to-Ckt and ATM Virtual Ckt.) Db Record Bit 3 corresponds to Protection Group Db Record Bit 4 corresponds to Port Profile Db Record Bit 5 corresponds to Channel Attribute Db Record Bit 6 corresponds to V5 (V5 Group and V5 Variant) Db Record Bit 7 corresponds to Facility Alarm String Db Record Bit 8 corresponds to TL1 Interface Provisioning Db Record Bit 9-15 Ignored For a give Db Record Type if corresponding bit is set to 1, The Db Record Change Trap for that Db Record Type shall be send through Generic Db Interface, Otherwise The Db Record Change Trap for that Db Record Type shall be send through it's own Trap handling mechanism. " DEFVAL { '010100'h } ::= { umc1System 20 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2067.1.1.2.1.20.0 | umc1DbRecordChangeTrapHandleMask | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2067.1.1.2.1.1 | umc1SystemDateTime | 1 | 1 | The system date and time is accessible as follows: octet[0] Timezone (0 through 24) octet[1] High-order 8-bits (MSB) of Year o… |
1.3.6.1.4.1.2067.1.1.2.1.2 | umc1SystemSysProv | 11 | 30 | None |
1.3.6.1.4.1.2067.1.1.2.1.3 | umc1SystemPitProv | 10 | 48 | None |
1.3.6.1.4.1.2067.1.1.2.1.4 | umc1CpuSoftwareFeatures | 1 | 1 | This object lists the features built into the UMC system. The list information required by the IPMI and EMS to determine the type… |
1.3.6.1.4.1.2067.1.1.2.1.5 | umc1SystemRelearnTrapSeqNum | 1 | 1 | A sequence number used to indicate the number of times the ACO operation has been performed since the agent last restarted. When… |
1.3.6.1.4.1.2067.1.1.2.1.6 | umc1RestrictedAccess | 1 | 1 | A change in the value of certain MIB objects could be service affecting. Henceforth, such objects are called restricted objects.… |
1.3.6.1.4.1.2067.1.1.2.1.7 | umc1Service | 6 | 33 | None |
1.3.6.1.4.1.2067.1.1.2.1.8 | umc1XConnect | 3 | 10 | None |
1.3.6.1.4.1.2067.1.1.2.1.9 | umc1SystemAllSeqNbr | 1 | 1 | This object encapsulates all sequence numbers. The format of this object is: Octet[0] contains version, 0x01 for this relea… |
1.3.6.1.4.1.2067.1.1.2.1.10 | umc1AtmProtTableChangeSeqNum | 1 | 1 | A sequence number used to indicate that the ATM Protection group provisioning Table, umc1AtmProtGrpTable, has been modified and … |
1.3.6.1.4.1.2067.1.1.2.1.11 | umc1AtmProtGrpTable | 1 | 3 | A Management Station uses this table to read, modify, create or delete a ATM Protection Group in the UMC system. The MIB Table h… |
1.3.6.1.4.1.2067.1.1.2.1.12 | umc1AtmProtGrpChgTable | 1 | 3 | The EMS uses this table to synchronize its internal representation of the ATM Protection Group Provisioning data with that manag… |
1.3.6.1.4.1.2067.1.1.2.1.13 | umc1PortProfTableChangeSeqNum | 1 | 1 | umc1PortProftableChangeSeqNum |
1.3.6.1.4.1.2067.1.1.2.1.14 | umc1PortProfTable | 1 | 3 | umc1PortProftable |
1.3.6.1.4.1.2067.1.1.2.1.15 | umc1PortProfChgTable | 1 | 3 | The EMS uses this table to synchronize its internal representation of the Port Profile Provisioning data with that managed by th… |
1.3.6.1.4.1.2067.1.1.2.1.16 | umc1MyAgentSoftwareFeatures | 1 | 1 | This object lists the features built into this load of IPMI software. Octet[0] represents the version of the packed format of … |
1.3.6.1.4.1.2067.1.1.2.1.17 | umc1Security | 3 | 10 | None |
1.3.6.1.4.1.2067.1.1.2.1.18 | umc1SystemGenericDbProv | 3 | 10 | None |
1.3.6.1.4.1.2067.1.1.2.1.19 | umc1MibVersion | 1 | 1 | This object gives Version of MIB supported by this load of IPMI software. Octet[0] represents the version of the packed format… |
1.3.6.1.4.1.2067.1.1.2.1.21 | umc1SystemAutonomousEvent | 2 | 6 | None |