Vendor: Compaq
Module: NetWorth-Series-2000-MIB (Compaq-Nws2000.mib)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
nw2NmmInfo OBJECT IDENTIFIER ::= { nw2 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.215.1.1.6.1.1 | nw2ModuleDescr | 1 | 1 | Text description of module. Includes firmware revision level. |
| 1.3.6.1.4.1.215.1.1.6.1.2 | nw2HwVer | 1 | 1 | The hardware version level. |
| 1.3.6.1.4.1.215.1.1.6.1.3 | nw2FwMajorVer | 1 | 1 | The major number of the firmware version. For example, if the firmware version is 2.12, the value of this object would be 2. |
| 1.3.6.1.4.1.215.1.1.6.1.4 | nw2FwMinorVer | 1 | 1 | The minor number of the firmware version. For example, if the firmware version is 2.12, the value of this object would be 12. |
| 1.3.6.1.4.1.215.1.1.6.1.5 | nw2ThisNmm | 1 | 1 | The stack index of the SNMP agent controlling this MIB. This corresponds to an entry in nw2StackTable. The topmost module in the… |
| 1.3.6.1.4.1.215.1.1.6.1.6 | nw2WriteCommunity | 1 | 1 | The write community name FOR ALL MODULES IN THE STACK. If the value is not public, the write community name is not returned for … |
| 1.3.6.1.4.1.215.1.1.6.1.7 | nw2WriteProtected | 1 | 1 | When set to readonly(2), the entire MIB, with the exception of this object is made read only. This may be used in conjunction wi… |
| 1.3.6.1.4.1.215.1.1.6.1.8 | nw2BootpRarpRequests | 1 | 1 | If the hub does not have an IP address assignment it periodically attempts to find one via the BOOTP and RARP protocols. Settin… |
| 1.3.6.1.4.1.215.1.1.6.1.9 | nw2IPFrameType | 1 | 1 | Except when the hub is booting up, it will communicate over IP using a single frame type defining the type of network that the I… |
| 1.3.6.1.4.1.215.1.1.6.1.10 | nw2IPXFrameType | 1 | 1 | The agent uses the frame to send SAP broadcasts, RIP requests, and IPX Traps. The default is ieee80222(3). |
| 1.3.6.1.4.1.215.1.1.6.1.11 | nw2IPXSAPBroadcast | 1 | 1 | The hub will generate SAP broadcasts over IPX. This allows the hub to be auto-discovered by NMS, Novell Management System and i… |
| 1.3.6.1.4.1.215.1.1.6.1.12 | nw2IPAutoDiscoveryState | 1 | 1 | This object will allow a user to enable the unit to send out periodic ICMP echo/request's to ensure that the unit's IP Address i… |
| 1.3.6.1.4.1.215.1.1.6.1.13 | nw2PingPacketRate | 1 | 1 | This object will determine the rate at which ICMP ping will be sent out by the unit to ensure the IP Address remains in the ARP … |
| 1.3.6.1.4.1.215.1.1.6.1.14 | nw2NVRAMStatus | 1 | 1 | This object provides status information of the non-volatile memory for the unit. If the value is error(2), all status infomatio… |
| 1.3.6.1.4.1.215.1.1.6.1.15 | nw2rptrReset | 1 | 1 | Setting this object to reset(2) causes the unit to restart, as if the unit was powered off then back on. All counters are destr… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.215.1.1.6.2 | nw2StackInfo | 1 | 10 | None |
| 1.3.6.1.4.1.215.1.1.6.3 | nw2ExtendedPortInfo | 1 | 5 | None |
| 1.3.6.1.4.1.215.1.1.6.4 | nw2BkUpPortInfo | 1 | 5 | None |
| 1.3.6.1.4.1.215.1.1.6.5 | nw2IPTrapInfo | 1 | 5 | None |
| 1.3.6.1.4.1.215.1.1.6.6 | nw2IPXTrapInfo | 1 | 5 | None |
| 1.3.6.1.4.1.215.1.1.6.7 | nw2DownloadInfo | 4 | 8 | None |
| 1.3.6.1.4.1.215.1.1.6.8 | nw2ExtendedRptrInfo | 8 | 16 | None |
| 1.3.6.1.4.1.215.1.1.6.9 | nw2IntrusionPortInfo | 1 | 6 | None |
| 1.3.6.1.4.1.215.1.1.6.10 | nw2SecurityInfo | 5 | 10 | None |