Parameter for controlling the aging of the
'inseretion_pool' (Should be long enough to
make sure that the station is not malfunctioning).
Units: milli seconds.
Minimal value: 1500. maximal value 4000.
Factory default: 3000
Setting this variable loads it into
non volatile memory.
The value written into non volatile memory
is loaded into the current value only
after reset.
Parsed from file fibr_FR9230.mib.txt
Company: None
Module: TMU-MIB
Parameter for controlling the aging of the
'inseretion-pool' (Should be long enough to
make sure that the station is not malfunctioning).
Units: milli seconds.
Minimal value: 1500. maximal value 4000.
Factory default: 3000
Setting this variable loads it into
non volatile memory.
The value written into non volatile memory
is loaded into the current value only
after reset.
Parsed from file TMU-MIB.mib
Module: TMU-MIB
Vendor: Fibronics
Module: TMU-MIB
[Automatically extracted from oidview.com]
fibTmuFunctInsPatPerm OBJECT-TYPE SYNTAX INTEGER (1500..4000) ACCESS read-write STATUS mandatory DESCRIPTION "Parameter for controlling the aging of the 'inseretion_pool' (Should be long enough to make sure that the station is not malfunctioning). Units: milli seconds. Minimal value: 1500. maximal value 4000. Factory default: 3000 Setting this variable loads it into non volatile memory. The value written into non volatile memory is loaded into the current value only after reset." ::= { fibTmuFunctRtpGrpVrsPerm 11 }
fibTmuFunctInsPatPerm OBJECT-TYPE SYNTAX INTEGER (1500..4000) ACCESS read-write STATUS mandatory DESCRIPTION "Parameter for controlling the aging of the 'inseretion-pool' (Should be long enough to make sure that the station is not malfunctioning). Units: milli seconds. Minimal value: 1500. maximal value 4000. Factory default: 3000 Setting this variable loads it into non volatile memory. The value written into non volatile memory is loaded into the current value only after reset." ::= { fibTmuFunctRtpGrpVrsPerm 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.22.60.8.2.11.0 | fibTmuFunctInsPatPerm | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.22.60.8.2.1 | fibTmuFunctBeacon2AutotestPerm | 1 | 1 | The time period for starting the 'autoremove' test after start of beaconing. In units of milliseconds. Minimal value: 160. maximal… |
| 1.3.6.1.4.1.22.60.8.2.2 | fibTmuFunctBeacon2OkPerm | 1 | 1 | The upper bound for time period starting at the removal of a problem till ring status indicates no beaconing. In units of millise… |
| 1.3.6.1.4.1.22.60.8.2.3 | fibTmuFunctOk2BeaconPerm | 1 | 1 | The upper bound for time period starting at the insertion of a problem till ring status indicates beaconing. In units of millisec… |
| 1.3.6.1.4.1.22.60.8.2.4 | fibTmuFunctWrapCwtPerm | 1 | 1 | Time delay to apply, after changing warp relay state. In units of milliseconds. Intended to let TMS get the real ring status. Mini… |
| 1.3.6.1.4.1.22.60.8.2.5 | fibTmuFunctWrapWnrPerm | 1 | 1 | Flag indicating whether to release CPU while waiting after warp change. Values: 1 - FALSE, 2 - TRUE. Factory default: TRUE. Setting… |
| 1.3.6.1.4.1.22.60.8.2.6 | fibTmuFunctRingIstPerm | 1 | 1 | Time to poll for consistent Tmu ring status before continuing recovery. In units of milliseconds. Minimal value: 0. maximal value … |
| 1.3.6.1.4.1.22.60.8.2.7 | fibTmuFunctRingIstnrPerm | 1 | 1 | Flag indicating whether to release CPU while waiting for consistent Tmu ring status. Values: 1 - FALSE, 2 - TRUE. Factory default: … |
| 1.3.6.1.4.1.22.60.8.2.8 | fibTmuFunctCheckAogTauPerm | 1 | 1 | Flag is used during BRUTAL recovery (single problem). If TRUE (checck-ring) then check whether the ring is BEACONING after openin… |
| 1.3.6.1.4.1.22.60.8.2.9 | fibTmuFunctMaxNoiPerm | 1 | 1 | When several station wants to insert into the ring, this parameter sets the limit on the maximal number of stations which are allo… |
| 1.3.6.1.4.1.22.60.8.2.10 | fibTmuFunctLinkPtifPerm | 1 | 1 | When problem in TMU segment is discovered then if this flag is TRUE, first of all try to find problem between last inserted statio… |
| 1.3.6.1.4.1.22.60.8.2.12 | fibTmuFunctUseMismatchPerm | 1 | 1 | Indication on whether to apply recovery when the number of stations is larger than the number of open ports. Values: 1 - FALSE, 2 … |
| 1.3.6.1.4.1.22.60.8.2.13 | fibTmuFunctChkRingInsPerm | 1 | 1 | Indication on whether to check ring status (for possible problems caused by the currently inserted stations) or not. Setting 'TRU… |
| 1.3.6.1.4.1.22.60.8.2.14 | fibTmuFunctChkRingPerPerm | 1 | 1 | Parameter indicating the elapsed time after letting a station into the ring after which a station is considered to be o.k. See 'fi… |
| 1.3.6.1.4.1.22.60.8.2.15 | fibTmuFunctClaimTimeOutPerm | 1 | 1 | Parameter indicating the elapsed time between the detection of a problem and the beginning of sending 'claim'. Units: milli second… |
| 1.3.6.1.4.1.22.60.8.2.16 | fibTmuFunctAnotherCheckPerm | 1 | 1 | Indication on whether to perform another check before disabling a port as a cross check. Values: 1 - FALSE, 2 - TRUE. Factory defa… |
| 1.3.6.1.4.1.22.60.8.2.17 | fibTmuFunctTmsOnOutPerm | 1 | 1 | Parameter indicating the tms to leave out of the ring when carrying out 'warp out': It could be TMS no. 2 (TMS OUT) or the TMS whi… |
| 1.3.6.1.4.1.22.60.8.2.18 | fibTmuFunctUseJitterPerm | 1 | 1 | Indication on whether to use the jitter buster hardware module or not. Values: 1 - FALSE, 2 - TRUE. Factory default: TRUE. Setting … |
| 1.3.6.1.4.1.22.60.8.2.21 | fibTmuFunctForceStpRiPerm | 1 | 1 | This object is used to control the type of the trunk (OPTIC or STP). Algorithm: if (optic-module-exists && do-not-force-ri-stp) { r… |
| 1.3.6.1.4.1.22.60.8.2.22 | fibTmuFunctForceStpRoPerm | 1 | 1 | This object is used to control the type of the trunk (OPTIC or STP). Algorithm: if (optic-module-exists && do-not-force-ro-stp) { r… |
| 1.3.6.1.4.1.22.60.8.2.23 | fibTmuFunctMaxSavRecPerm | 1 | 1 | Parameter indicating how many elements to save in the fifo buffer of containing the history of recovery. Minimal value: 5. maximal… |
| 1.3.6.1.4.1.22.60.8.2.24 | fibTmuFunctReadPerPerm | 1 | 1 | Parameter indicating the elapsed time between two readings of the error counter of a TMS. Too large a period may result in counte… |
| 1.3.6.1.4.1.22.60.8.2.25 | fibTmuFunctDmaThreshPerm | 1 | 1 | Parameter indicating the number of times DMA will attempt retry in case of bus error before giving up. Minimal value: 0. maximal v… |
| 1.3.6.1.4.1.22.60.8.2.26 | fibTmuFunctRemWrapTypePerm | 1 | 1 | Parameter indicating the criterion for removing 'wrap': It could be removed when the ring is not beaconing and it could be removed… |
| 1.3.6.1.4.1.22.60.8.2.27 | fibTmuFunctRemWrapLenPerm | 1 | 1 | Parameter indicating the elapsed time between the time it is decided that wrap can be removed and the actual removal. See 'fibTmuF… |