Indication on whether to check ring status
(for possible problems caused by the currently
inserted stations) or not. Setting 'TRUE' results
in quicker discovery of stations with invalid
frequency but inflicts higher overhead on
legitimate frequency stations.
Values: 1 - FALSE, 2 - TRUE.
Factory default: FALSE.
Setting this variable loads it into
non volatile memory.
The value written into non volatile memory
is loaded into the current value only
after reset.
Parsed from file fibr_FR9230.mib.txt
Company: None
Module: TMU-MIB
Indication on whether to check ring status
(for possible problems caused by the currently
inserted stations) or not. Setting 'TRUE' results
in quicker discovery of stations with invalid
frequency but inflicts higher overhead on
legitimate frequency stations.
Values: 1 - FALSE, 2 - TRUE.
Factory default: FALSE.
Setting this variable loads it into
non volatile memory.
The value written into non volatile memory
is loaded into the current value only
after reset.
Parsed from file TMU-MIB.mib
Module: TMU-MIB
Vendor: Fibronics
Module: TMU-MIB
[Automatically extracted from oidview.com]
fibTmuFunctChkRingInsPerm OBJECT-TYPE SYNTAX INTEGER { dont-check-ring(1), check-ring(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indication on whether to check ring status (for possible problems caused by the currently inserted stations) or not. Setting 'TRUE' results in quicker discovery of stations with invalid frequency but inflicts higher overhead on legitimate frequency stations. Values: 1 - FALSE, 2 - TRUE. Factory default: FALSE. Setting this variable loads it into non volatile memory. The value written into non volatile memory is loaded into the current value only after reset." ::= { fibTmuFunctRtpGrpVrsPerm 13 }
fibTmuFunctChkRingInsPerm OBJECT-TYPE SYNTAX INTEGER { dont-check-ring(1), check-ring(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Indication on whether to check ring status (for possible problems caused by the currently inserted stations) or not. Setting 'TRUE' results in quicker discovery of stations with invalid frequency but inflicts higher overhead on legitimate frequency stations. Values: 1 - FALSE, 2 - TRUE. Factory default: FALSE. Setting this variable loads it into non volatile memory. The value written into non volatile memory is loaded into the current value only after reset." ::= { fibTmuFunctRtpGrpVrsPerm 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.22.60.8.2.13.0 | fibTmuFunctChkRingInsPerm | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.22.60.8.2.1 | fibTmuFunctBeacon2AutotestPerm | 1 | 1 | The time period for starting the 'autoremove' test after start of beaconing. In units of milliseconds. Minimal value: 160. maximal… |
| 1.3.6.1.4.1.22.60.8.2.2 | fibTmuFunctBeacon2OkPerm | 1 | 1 | The upper bound for time period starting at the removal of a problem till ring status indicates no beaconing. In units of millise… |
| 1.3.6.1.4.1.22.60.8.2.3 | fibTmuFunctOk2BeaconPerm | 1 | 1 | The upper bound for time period starting at the insertion of a problem till ring status indicates beaconing. In units of millisec… |
| 1.3.6.1.4.1.22.60.8.2.4 | fibTmuFunctWrapCwtPerm | 1 | 1 | Time delay to apply, after changing warp relay state. In units of milliseconds. Intended to let TMS get the real ring status. Mini… |
| 1.3.6.1.4.1.22.60.8.2.5 | fibTmuFunctWrapWnrPerm | 1 | 1 | Flag indicating whether to release CPU while waiting after warp change. Values: 1 - FALSE, 2 - TRUE. Factory default: TRUE. Setting… |
| 1.3.6.1.4.1.22.60.8.2.6 | fibTmuFunctRingIstPerm | 1 | 1 | Time to poll for consistent Tmu ring status before continuing recovery. In units of milliseconds. Minimal value: 0. maximal value … |
| 1.3.6.1.4.1.22.60.8.2.7 | fibTmuFunctRingIstnrPerm | 1 | 1 | Flag indicating whether to release CPU while waiting for consistent Tmu ring status. Values: 1 - FALSE, 2 - TRUE. Factory default: … |
| 1.3.6.1.4.1.22.60.8.2.8 | fibTmuFunctCheckAogTauPerm | 1 | 1 | Flag is used during BRUTAL recovery (single problem). If TRUE (checck-ring) then check whether the ring is BEACONING after openin… |
| 1.3.6.1.4.1.22.60.8.2.9 | fibTmuFunctMaxNoiPerm | 1 | 1 | When several station wants to insert into the ring, this parameter sets the limit on the maximal number of stations which are allo… |
| 1.3.6.1.4.1.22.60.8.2.10 | fibTmuFunctLinkPtifPerm | 1 | 1 | When problem in TMU segment is discovered then if this flag is TRUE, first of all try to find problem between last inserted statio… |
| 1.3.6.1.4.1.22.60.8.2.11 | fibTmuFunctInsPatPerm | 1 | 1 | Parameter for controlling the aging of the 'inseretion_pool' (Should be long enough to make sure that the station is not malfunct… |
| 1.3.6.1.4.1.22.60.8.2.12 | fibTmuFunctUseMismatchPerm | 1 | 1 | Indication on whether to apply recovery when the number of stations is larger than the number of open ports. Values: 1 - FALSE, 2 … |
| 1.3.6.1.4.1.22.60.8.2.14 | fibTmuFunctChkRingPerPerm | 1 | 1 | Parameter indicating the elapsed time after letting a station into the ring after which a station is considered to be o.k. See 'fi… |
| 1.3.6.1.4.1.22.60.8.2.15 | fibTmuFunctClaimTimeOutPerm | 1 | 1 | Parameter indicating the elapsed time between the detection of a problem and the beginning of sending 'claim'. Units: milli second… |
| 1.3.6.1.4.1.22.60.8.2.16 | fibTmuFunctAnotherCheckPerm | 1 | 1 | Indication on whether to perform another check before disabling a port as a cross check. Values: 1 - FALSE, 2 - TRUE. Factory defa… |
| 1.3.6.1.4.1.22.60.8.2.17 | fibTmuFunctTmsOnOutPerm | 1 | 1 | Parameter indicating the tms to leave out of the ring when carrying out 'warp out': It could be TMS no. 2 (TMS OUT) or the TMS whi… |
| 1.3.6.1.4.1.22.60.8.2.18 | fibTmuFunctUseJitterPerm | 1 | 1 | Indication on whether to use the jitter buster hardware module or not. Values: 1 - FALSE, 2 - TRUE. Factory default: TRUE. Setting … |
| 1.3.6.1.4.1.22.60.8.2.21 | fibTmuFunctForceStpRiPerm | 1 | 1 | This object is used to control the type of the trunk (OPTIC or STP). Algorithm: if (optic-module-exists && do-not-force-ri-stp) { r… |
| 1.3.6.1.4.1.22.60.8.2.22 | fibTmuFunctForceStpRoPerm | 1 | 1 | This object is used to control the type of the trunk (OPTIC or STP). Algorithm: if (optic-module-exists && do-not-force-ro-stp) { r… |
| 1.3.6.1.4.1.22.60.8.2.23 | fibTmuFunctMaxSavRecPerm | 1 | 1 | Parameter indicating how many elements to save in the fifo buffer of containing the history of recovery. Minimal value: 5. maximal… |
| 1.3.6.1.4.1.22.60.8.2.24 | fibTmuFunctReadPerPerm | 1 | 1 | Parameter indicating the elapsed time between two readings of the error counter of a TMS. Too large a period may result in counte… |
| 1.3.6.1.4.1.22.60.8.2.25 | fibTmuFunctDmaThreshPerm | 1 | 1 | Parameter indicating the number of times DMA will attempt retry in case of bus error before giving up. Minimal value: 0. maximal v… |
| 1.3.6.1.4.1.22.60.8.2.26 | fibTmuFunctRemWrapTypePerm | 1 | 1 | Parameter indicating the criterion for removing 'wrap': It could be removed when the ring is not beaconing and it could be removed… |
| 1.3.6.1.4.1.22.60.8.2.27 | fibTmuFunctRemWrapLenPerm | 1 | 1 | Parameter indicating the elapsed time between the time it is decided that wrap can be removed and the actual removal. See 'fibTmuF… |