A table of CODIMA Express History Long Term
Segment Database Port Object. Based on 15
minute intervals Segment statistics are gathered
on the network segment to which the Express is attached.
The Port object implements statistics that are specific
to the segment that are monitored on port 1 and port 2
of the Express hardware, e.g.,
Port 1 Frames, Port 1 Bytes, Port 2 Frames, Port 2 Bytes.
This object is most relevant when you are using the Express
as a dual port analyzer, i.e., monitoring full duplex.
The number of rows in this table is dependant on the value
chosen for the Long Term dcTimeSlots object.
Parsed from file CODIMA-EXPRESS-MIB.my.txt
Company: None
Module: CODIMA-EXPRESS-MIB
A table of CODIMA Express History Long Term
Segment Database Port Object. Based on 15
minute intervals Segment statistics are gathered
on the network segment to which the Express is attached.
The Port object implements statistics that are specific
to the segment that are monitored on port 1 and port 2
of the Express hardware, e.g.,
Port 1 Frames, Port 1 Bytes, Port 2 Frames, Port 2 Bytes.
This object is most relevant when you are using the Express
as a dual port analyzer, i.e., monitoring full duplex.
The number of rows in this table is dependant on the value
chosen for the Long Term dcTimeSlots object.
Parsed from file CODIMA-EXPRESS-MIB.mib
Module: CODIMA-EXPRESS-MIB
Vendor: CODIMA Technologies Ltd
Module: CODIMA-EXPRESS-MIB
[Automatically extracted from oidview.com]
slPortEntry OBJECT-TYPE SYNTAX SlPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of CODIMA Express History Long Term Segment Database Port Object. Based on 15 minute intervals Segment statistics are gathered on the network segment to which the Express is attached. The Port object implements statistics that are specific to the segment that are monitored on port 1 and port 2 of the Express hardware, e.g., Port 1 Frames, Port 1 Bytes, Port 2 Frames, Port 2 Bytes. This object is most relevant when you are using the Express as a dual port analyzer, i.e., monitoring full duplex. The number of rows in this table is dependant on the value chosen for the Long Term dcTimeSlots object." INDEX { slp1TimeStampIndex } ::= { slPortTable 1 }
slPortEntry OBJECT-TYPE SYNTAX SlPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of CODIMA Express History Long Term Segment Database Port Object. Based on 15 minute intervals Segment statistics are gathered on the network segment to which the Express is attached. The Port object implements statistics that are specific to the segment that are monitored on port 1 and port 2 of the Express hardware, e.g., Port 1 Frames, Port 1 Bytes, Port 2 Frames, Port 2 Bytes. This object is most relevant when you are using the Express as a dual port analyzer, i.e., monitoring full duplex. The number of rows in this table is dependant on the value chosen for the Long Term dcTimeSlots object." INDEX { slp1TimeStampIndex } ::= { slPortTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.1 | slp1TimeStampIndex | 0 | 0 | Identifies the History Time-stamp for this row. This is UTC time, measured in seconds from Midnight January 1st 1970. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.2 | slp1TimeStamp | 0 | 0 | A textual representation of the associated TimeStampIndex object which shows the History time-stamp for this row. The value is in … |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.3 | slp1Frames | 0 | 0 | Number of Frames monitored on Port 1. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.4 | slp1Bytes | 0 | 0 | Number of Bytes monitored on Port 1. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.5 | slp1FrameSize | 0 | 0 | Average Frame Size in bytes for frames monitored on Port 1. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.6 | slp1Utilization | 0 | 0 | Percent Wire Speed for Port 1. Divide this objects value by 1000 to get the real floating point percentage value, e.g. 132 = 0.13… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.7 | slp1LineSpeed | 0 | 0 | Line speed in bits per second for Port 1. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.8 | slp1SoftErrors | 0 | 0 | Number of software errors for Port 1. Protocol/Soft errors are valid frames designed to report anomalies. For example the Intern… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.9 | slp1Runts | 0 | 0 | Number of Runts on Port 1. Runts are frames which are smaller than the Ethernet minimum frames size of 64 bytes. A value of 42949… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.10 | slp1Jabbers | 0 | 0 | Number of Jabber Frames on Port 1. Jabbers are frames which exceed the Ethernet maximum packets size of 1518, they are most ofte… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.11 | slp1Crc | 0 | 0 | Number of CRC/Alignment Errors on Port 1. CRC errors are frames which have been damaged. The Cyclic Redundancy Checksum used to … |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.12 | slp1Collisions | 0 | 0 | Number of Collisions monitored on Port 1. Collisions are the result of two workstations trying to use shared a transmission mediu… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.13 | slp1LateCollisions | 0 | 0 | Number of Late Collisions monitored on Port 1. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.14 | slp1LineNoise | 0 | 0 | Line noise level (number of bursts) on Port 1. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.15 | slp2Frames | 0 | 0 | Number of Frames monitored on Port 2. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.16 | slp2Bytes | 0 | 0 | Number of Bytes monitored on Port 2. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.17 | slp2FrameSize | 0 | 0 | Average Frame Size, in bytes, for frames monitored on Port 2. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.18 | slp2Utilization | 0 | 0 | Percent Wire Speed for Port 2. Divide this objects value by 1000 to get the real floating point percentage value, e.g. 132 = 0.13… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.19 | slp2LineSpeed | 0 | 0 | Line speed in bits per second for Port 2. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.20 | slp2SoftErrors | 0 | 0 | Number of software errors for Port 2. Protocol/Soft errors are valid frames designed to report anomalies. For example the Intern… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.21 | slp2Runts | 0 | 0 | Number of Runts on Port 2. Runts are frames which are smaller than the Ethernet minimum frames size of 64 bytes. A value of 42949… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.22 | slp2Jabbers | 0 | 0 | Number of Jabber Frames on Port 2. Jabbers are frames which exceed the Ethernet maximum packets size of 1518, they are most ofte… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.23 | slp2Crc | 0 | 0 | Number of CRC/Alignment Errors on Port 2. CRC errors are frames which have been damaged. The Cyclic Redundancy Checksum used to … |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.24 | slp2Collisions | 0 | 0 | Number of Collisions monitored on Port 2. Collisions are the result of two workstations trying to use shared a transmission mediu… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.25 | slp2LateCollisions | 0 | 0 | Number of Late Collisions monitored on Port 2. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.26 | slp2LineNoise | 0 | 0 | Line noise level (number of bursts) on Port 2. A value of 4294967294 indicates unknown. |