Number of CRC/Alignment Errors on Port 1. CRC errors are frames
which have been damaged. The Cyclic Redundancy
Checksum used to confirm the validity of the frames contents
shows that the frame is not valid.
Alignment Errors are frames which are misaligned, a frame
which does not end on an 8-bit boundary is considered an
Alignment Error.
A value of 4294967294 indicates unknown.
Parsed from file CODIMA-EXPRESS-MIB.my.txt
Company: None
Module: CODIMA-EXPRESS-MIB
Number of CRC/Alignment Errors on Port 1. CRC errors are frames
which have been damaged. The Cyclic Redundancy
Checksum used to confirm the validity of the frames contents
shows that the frame is not valid.
Alignment Errors are frames which are misaligned, a frame
which does not end on an 8-bit boundary is considered an
Alignment Error.
A value of 4294967294 indicates unknown.
Parsed from file CODIMA-EXPRESS-MIB.mib
Module: CODIMA-EXPRESS-MIB
Vendor: CODIMA Technologies Ltd
Module: CODIMA-EXPRESS-MIB
[Automatically extracted from oidview.com]
slp1Crc OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of CRC/Alignment Errors on Port 1. CRC errors are frames which have been damaged. The Cyclic Redundancy Checksum used to confirm the validity of the frames contents shows that the frame is not valid. Alignment Errors are frames which are misaligned, a frame which does not end on an 8-bit boundary is considered an Alignment Error. A value of 4294967294 indicates unknown." ::= { slPortEntry 11 }
slp1Crc OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of CRC/Alignment Errors on Port 1. CRC errors are frames which have been damaged. The Cyclic Redundancy Checksum used to confirm the validity of the frames contents shows that the frame is not valid. Alignment Errors are frames which are misaligned, a frame which does not end on an 8-bit boundary is considered an Alignment Error. A value of 4294967294 indicates unknown." ::= { slPortEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.1 | slp1TimeStampIndex | 0 | 0 | Identifies the History Time-stamp for this row. This is UTC time, measured in seconds from Midnight January 1st 1970. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.2 | slp1TimeStamp | 0 | 0 | A textual representation of the associated TimeStampIndex object which shows the History time-stamp for this row. The value is in … |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.3 | slp1Frames | 0 | 0 | Number of Frames monitored on Port 1. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.4 | slp1Bytes | 0 | 0 | Number of Bytes monitored on Port 1. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.5 | slp1FrameSize | 0 | 0 | Average Frame Size in bytes for frames monitored on Port 1. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.6 | slp1Utilization | 0 | 0 | Percent Wire Speed for Port 1. Divide this objects value by 1000 to get the real floating point percentage value, e.g. 132 = 0.13… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.7 | slp1LineSpeed | 0 | 0 | Line speed in bits per second for Port 1. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.8 | slp1SoftErrors | 0 | 0 | Number of software errors for Port 1. Protocol/Soft errors are valid frames designed to report anomalies. For example the Intern… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.9 | slp1Runts | 0 | 0 | Number of Runts on Port 1. Runts are frames which are smaller than the Ethernet minimum frames size of 64 bytes. A value of 42949… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.10 | slp1Jabbers | 0 | 0 | Number of Jabber Frames on Port 1. Jabbers are frames which exceed the Ethernet maximum packets size of 1518, they are most ofte… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.12 | slp1Collisions | 0 | 0 | Number of Collisions monitored on Port 1. Collisions are the result of two workstations trying to use shared a transmission mediu… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.13 | slp1LateCollisions | 0 | 0 | Number of Late Collisions monitored on Port 1. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.14 | slp1LineNoise | 0 | 0 | Line noise level (number of bursts) on Port 1. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.15 | slp2Frames | 0 | 0 | Number of Frames monitored on Port 2. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.16 | slp2Bytes | 0 | 0 | Number of Bytes monitored on Port 2. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.17 | slp2FrameSize | 0 | 0 | Average Frame Size, in bytes, for frames monitored on Port 2. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.18 | slp2Utilization | 0 | 0 | Percent Wire Speed for Port 2. Divide this objects value by 1000 to get the real floating point percentage value, e.g. 132 = 0.13… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.19 | slp2LineSpeed | 0 | 0 | Line speed in bits per second for Port 2. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.20 | slp2SoftErrors | 0 | 0 | Number of software errors for Port 2. Protocol/Soft errors are valid frames designed to report anomalies. For example the Intern… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.21 | slp2Runts | 0 | 0 | Number of Runts on Port 2. Runts are frames which are smaller than the Ethernet minimum frames size of 64 bytes. A value of 42949… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.22 | slp2Jabbers | 0 | 0 | Number of Jabber Frames on Port 2. Jabbers are frames which exceed the Ethernet maximum packets size of 1518, they are most ofte… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.23 | slp2Crc | 0 | 0 | Number of CRC/Alignment Errors on Port 2. CRC errors are frames which have been damaged. The Cyclic Redundancy Checksum used to … |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.24 | slp2Collisions | 0 | 0 | Number of Collisions monitored on Port 2. Collisions are the result of two workstations trying to use shared a transmission mediu… |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.25 | slp2LateCollisions | 0 | 0 | Number of Late Collisions monitored on Port 2. A value of 4294967294 indicates unknown. |
| 1.3.6.1.4.1.226.3.2.1.1.2.1.6.1.26 | slp2LineNoise | 0 | 0 | Line noise level (number of bursts) on Port 2. A value of 4294967294 indicates unknown. |