The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.
Parsed from file xlr30.mib.txt
Company: None
Module: RAPID-CITY-MIB
The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originated by this node.
Parsed from file RAPID-CITY.mib
Module: RAPID-CITY
rcStgDesignatedRoot OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.1" ::= { rcStgEntry 10 }
Vendor: Rapid City Communication
Module: RAPID-CITY
[Automatically extracted from oidview.com]
rcStgDesignatedRoot OBJECT-TYPE SYNTAX BridgeId ACCESS read-only STATUS mandatory DESCRIPTION "The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node." REFERENCE "IEEE 802.1D-1990: Section 4.5.3.1" ::= { rcStgEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.13.4.1.1 | rcStgId | 0 | 0 | An identifier used to identify a STG in the device. |
| 1.3.6.1.4.1.2272.1.13.4.1.2 | rcStgTaggedBpduAddress | 0 | 0 | The MAC address to be assigned to the destination mac address field in tagged BPDUs. The default address is the well known multic… |
| 1.3.6.1.4.1.2272.1.13.4.1.3 | rcStgTaggedBpduVlanId | 0 | 0 | The VLAN ID to be used for tagging BPDUs. |
| 1.3.6.1.4.1.2272.1.13.4.1.4 | rcStgBridgeAddress | 0 | 0 | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numeric… |
| 1.3.6.1.4.1.2272.1.13.4.1.5 | rcStgNumPorts | 0 | 0 | The number of ports controlled by this bridging entity. |
| 1.3.6.1.4.1.2272.1.13.4.1.6 | rcStgProtocolSpecification | 0 | 0 | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 10… |
| 1.3.6.1.4.1.2272.1.13.4.1.7 | rcStgPriority | 0 | 0 | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (las… |
| 1.3.6.1.4.1.2272.1.13.4.1.8 | rcStgTimeSinceTopologyChange | 0 | 0 | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.2272.1.13.4.1.9 | rcStgTopChanges | 0 | 0 | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.2272.1.13.4.1.11 | rcStgRootCost | 0 | 0 | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.2272.1.13.4.1.12 | rcStgRootPort | 0 | 0 | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.2272.1.13.4.1.13 | rcStgMaxAge | 0 | 0 | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hu… |
| 1.3.6.1.4.1.2272.1.13.4.1.14 | rcStgHelloTime | 0 | 0 | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the span… |
| 1.3.6.1.4.1.2272.1.13.4.1.15 | rcStgHoldTime | 0 | 0 | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by th… |
| 1.3.6.1.4.1.2272.1.13.4.1.16 | rcStgForwardDelay | 0 | 0 | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving tow… |
| 1.3.6.1.4.1.2272.1.13.4.1.17 | rcStgBridgeMaxAge | 0 | 0 | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range… |
| 1.3.6.1.4.1.2272.1.13.4.1.18 | rcStgBridgeHelloTime | 0 | 0 | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified … |
| 1.3.6.1.4.1.2272.1.13.4.1.19 | rcStgBridgeForwardDelay | 0 | 0 | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the… |
| 1.3.6.1.4.1.2272.1.13.4.1.20 | rcStgEnableStp | 0 | 0 | Indicate whether the spanning tree protocol should be active in this STG. |
| 1.3.6.1.4.1.2272.1.13.4.1.21 | rcStgStpTrapEnable | 0 | 0 | Indicate whether traps relating to the spanning tree protocol should be sent for this STG. |
| 1.3.6.1.4.1.2272.1.13.4.1.22 | rcStgPortMembers | 0 | 0 | A bitfield used to identify which ports in the system are members this STG. The bitfield is 32 octets long representing ports 0 to… |
| 1.3.6.1.4.1.2272.1.13.4.1.23 | rcStgRowStatus | 0 | 0 | Row status. |
| 1.3.6.1.4.1.2272.1.13.4.1.24 | rcStgPortStpState, rcStgPortStgState | 0 | 0 | Every 2 bitfields used to identify a port state in this STG. Port state is cataloged as non-stp(0), blocking(1), learning(2), and… |
| 1.3.6.1.4.1.2272.1.13.4.1.25 | rcStgType | 0 | 0 | Type of Stg. |
| 1.3.6.1.4.1.2272.1.13.4.1.26 | rcStgNtStgEnable | 0 | 0 | Indicates whether this STG is Operating in Nortel Mode or in Cisco Mode. true = Nortel Mode false = Cisco Mode. |