The VLAN ID to be used for tagging BPDUs.
Parsed from file xlr30.mib.txt
Company: None
Module: RAPID-CITY-MIB
The VLAN ID to be used for tagging BPDUs.
Parsed from file RAPID-CITY.mib
Module: RAPID-CITY
rcStgTaggedBpduVlanId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN ID to be used for tagging BPDUs." ::= { rcStgEntry 3 }
Vendor: Rapid City Communication
Module: RAPID-CITY
[Automatically extracted from oidview.com]
rcStgTaggedBpduVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The VLAN ID to be used for tagging BPDUs." ::= { rcStgEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.13.4.1.1 | rcStgId | 0 | 0 | An identifier used to identify a STG in the device. |
| 1.3.6.1.4.1.2272.1.13.4.1.2 | rcStgTaggedBpduAddress | 0 | 0 | The MAC address to be assigned to the destination mac address field in tagged BPDUs. The default address is the well known multic… |
| 1.3.6.1.4.1.2272.1.13.4.1.4 | rcStgBridgeAddress | 0 | 0 | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numeric… |
| 1.3.6.1.4.1.2272.1.13.4.1.5 | rcStgNumPorts | 0 | 0 | The number of ports controlled by this bridging entity. |
| 1.3.6.1.4.1.2272.1.13.4.1.6 | rcStgProtocolSpecification | 0 | 0 | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 10… |
| 1.3.6.1.4.1.2272.1.13.4.1.7 | rcStgPriority | 0 | 0 | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (las… |
| 1.3.6.1.4.1.2272.1.13.4.1.8 | rcStgTimeSinceTopologyChange | 0 | 0 | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.2272.1.13.4.1.9 | rcStgTopChanges | 0 | 0 | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.2272.1.13.4.1.10 | rcStgDesignatedRoot | 0 | 0 | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. Thi… |
| 1.3.6.1.4.1.2272.1.13.4.1.11 | rcStgRootCost | 0 | 0 | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.2272.1.13.4.1.12 | rcStgRootPort | 0 | 0 | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.2272.1.13.4.1.13 | rcStgMaxAge | 0 | 0 | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hu… |
| 1.3.6.1.4.1.2272.1.13.4.1.14 | rcStgHelloTime | 0 | 0 | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the span… |
| 1.3.6.1.4.1.2272.1.13.4.1.15 | rcStgHoldTime | 0 | 0 | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by th… |
| 1.3.6.1.4.1.2272.1.13.4.1.16 | rcStgForwardDelay | 0 | 0 | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving tow… |
| 1.3.6.1.4.1.2272.1.13.4.1.17 | rcStgBridgeMaxAge | 0 | 0 | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range… |
| 1.3.6.1.4.1.2272.1.13.4.1.18 | rcStgBridgeHelloTime | 0 | 0 | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified … |
| 1.3.6.1.4.1.2272.1.13.4.1.19 | rcStgBridgeForwardDelay | 0 | 0 | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the… |
| 1.3.6.1.4.1.2272.1.13.4.1.20 | rcStgEnableStp | 0 | 0 | Indicate whether the spanning tree protocol should be active in this STG. |
| 1.3.6.1.4.1.2272.1.13.4.1.21 | rcStgStpTrapEnable | 0 | 0 | Indicate whether traps relating to the spanning tree protocol should be sent for this STG. |
| 1.3.6.1.4.1.2272.1.13.4.1.22 | rcStgPortMembers | 0 | 0 | A bitfield used to identify which ports in the system are members this STG. The bitfield is 32 octets long representing ports 0 to… |
| 1.3.6.1.4.1.2272.1.13.4.1.23 | rcStgRowStatus | 0 | 0 | Row status. |
| 1.3.6.1.4.1.2272.1.13.4.1.24 | rcStgPortStpState, rcStgPortStgState | 0 | 0 | Every 2 bitfields used to identify a port state in this STG. Port state is cataloged as non-stp(0), blocking(1), learning(2), and… |
| 1.3.6.1.4.1.2272.1.13.4.1.25 | rcStgType | 0 | 0 | Type of Stg. |
| 1.3.6.1.4.1.2272.1.13.4.1.26 | rcStgNtStgEnable | 0 | 0 | Indicates whether this STG is Operating in Nortel Mode or in Cisco Mode. true = Nortel Mode false = Cisco Mode. |