Used to display the mac address reserved for this MLT
Parsed from file RC-MLT-MIB.mib.txt
Company: avaya
Module: RC-MLT-MIB
rcMltUniAggrMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Used to display the mac address reserved for this MLT" ::= { rcMltEntry 27 }
Vendor: Avaya
Module: RC-MLT-MIB (RC-MLT-MIB.mib)
Type: TABULAR
Access: read-only
Syntax: MacAddress
Automatically extracted from www.mibdepot.com
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.2272.1.17.10.1.1 | rcMltId | 0 | 0 | A value that uniquely identifies the Multi-Link Trunk associated with this entry. |
1.3.6.1.4.1.2272.1.17.10.1.2 | rcMltName | 0 | 0 | An administratively-assigned name for this MLT. |
1.3.6.1.4.1.2272.1.17.10.1.3 | rcMltPortMembers | 0 | 0 | The set of ports that are members of this MLT. |
1.3.6.1.4.1.2272.1.17.10.1.4 | rcMltPortType | 0 | 0 | The type of MLT port: access(1) or trunk(2). |
1.3.6.1.4.1.2272.1.17.10.1.5 | rcMltNumVlanIds | 0 | 0 | Used to indicate the number of VLAN IDs that are stored in the rcMltVlanIds variable. |
1.3.6.1.4.1.2272.1.17.10.1.6 | rcMltVlanIds | 0 | 0 | An array used to identify which VLANs this MLT is associated with. Each VLAN ID is stored as a two octet value. The first octet … |
1.3.6.1.4.1.2272.1.17.10.1.7 | rcMltRowStatus | 0 | 0 | Used to create/delete entries in the rcMltTable. |
1.3.6.1.4.1.2272.1.17.10.1.8 | rcMltEnable | 0 | 0 | Enable the entry. |
1.3.6.1.4.1.2272.1.17.10.1.9 | rcMltLoadBalance | 0 | 0 | Perform load balance? |
1.3.6.1.4.1.2272.1.17.10.1.10 | rcMltDistributionAlgorithm | 0 | 0 | The load balancing algorithm. |
1.3.6.1.4.1.2272.1.17.10.1.11 | rcMltIfIndex | 0 | 0 | Used to indicate the 'logical' ifIndex assigned to this MLT. |
1.3.6.1.4.1.2272.1.17.10.1.12 | rcMltMltType | 0 | 0 | MLT type. |
1.3.6.1.4.1.2272.1.17.10.1.13 | rcMltSmltId | 0 | 0 | Split MLT id. |
1.3.6.1.4.1.2272.1.17.10.1.14 | rcMltRunningType | 0 | 0 | Split MLT running type. |
1.3.6.1.4.1.2272.1.17.10.1.15 | rcMltSvlanPortType | 0 | 0 | Set MLT port type. |
1.3.6.1.4.1.2272.1.17.10.1.16 | rcMltMulticastDistribution | 0 | 0 | Enable/Disable multicast distribution per mlt. |
1.3.6.1.4.1.2272.1.17.10.1.17 | rcMltLacp10gBackup | 0 | 0 | Enable/Disable 10G Mlt reliance backup mode. |
1.3.6.1.4.1.2272.1.17.10.1.18 | rcMltAggregatable | 0 | 0 | Enable/Disable link aggregation on a MLT. |
1.3.6.1.4.1.2272.1.17.10.1.19 | rcMltClearLinkAggregate | 0 | 0 | clear link aggregate, equivalent to disable and re-enable aggregatable on the MLT. |
1.3.6.1.4.1.2272.1.17.10.1.20 | rcMltNtStgEnable | 0 | 0 | Indicates whether this MLT is operating in Nortel Mode or in Cisco Mode. true = Nortel Mode false = Cisco Mode. |
1.3.6.1.4.1.2272.1.17.10.1.21 | rcMltDesignatedPort | 0 | 0 | Indicates the Designated port for the MLT. |
1.3.6.1.4.1.2272.1.17.10.1.22 | rcMltAggOperState | 0 | 0 | Link aggregation state on a MLT. |
1.3.6.1.4.1.2272.1.17.10.1.23 | rcMltAggTimeOfLastOperChange | 0 | 0 | The time value since the interface entered its current operational state. |
1.3.6.1.4.1.2272.1.17.10.1.24 | rcMltVplsMgmtVlan | 0 | 0 | Management Vlan is configured on this mlt |
1.3.6.1.4.1.2272.1.17.10.1.25 | rcMltLoadDistributionOption | 0 | 0 | Used to specify the Load Balancing option for MLT in UNI |
1.3.6.1.4.1.2272.1.17.10.1.26 | rcMltUniAggrMacIdx | 0 | 0 | Used to specify the index of the mac address pool reserved for MLT uni |
1.3.6.1.4.1.2272.1.17.10.1.28 | rcMltQinqEtherType | 0 | 0 | The qinq ether type value. It should be displayed and input as Hex value. It would only be used when MLT is associated with QnQ s… |
1.3.6.1.4.1.2272.1.17.10.1.29 | rcMltEgressCosProfileName | 0 | 0 | Mlt Egress COS Profile Name, which is defined by rcCosProfileTable |
1.3.6.1.4.1.2272.1.17.10.1.30 | rcMltEgressPolicerAdminState | 0 | 0 | Enable/disable Mlt Egress Policer |
1.3.6.1.4.1.2272.1.17.10.1.31 | rcMltAggrEgressBandwidth | 0 | 0 | Aggregated Egress Bandwidth Policer is used. |
1.3.6.1.4.1.2272.1.17.10.1.32 | rcMltAggrIngressBandwidth | 0 | 0 | Aggregated Ingress Bandwidth Policer is used. |
1.3.6.1.4.1.2272.1.17.10.1.33 | rcMltAggrMacAlloc | 0 | 0 | Aggregated Mac Allocation is used |
1.3.6.1.4.1.2272.1.17.10.1.34 | rcMltAggMinLink | 0 | 0 | If number of active links goes below configured minimum-link number, the entire LAG is declared down. |
1.3.6.1.4.1.2272.1.17.10.1.35 | rcMltMtu | 0 | 0 | MTU for ports in Mlt |
1.3.6.1.4.1.2272.1.17.10.1.36 | rcMltInterfaceType | 0 | 0 | This value indicates whether ports in the mlt are of type service only if this attribute is … |
1.3.6.1.4.1.2272.1.17.10.1.37 | rcMltConfiguredMembers | 0 | 0 | The set of ports that are configured members of this MLT. Toronto release allows us to add a port to a LACP enabled MLT. These po… |
1.3.6.1.4.1.2272.1.17.10.1.38 | rcMltMtuAdminState | 0 | 0 | Set Mlt MTU enable or disable |