This value indicates whether ports in the mlt are of type
service only if this attribute is set to uni. If the port
is not part of any VLAN the interface-type is set to silent.
Before adding a port to a VLAN the interface type should
be changed to normal.
Parsed from file RC-MLT-MIB.mib.txt
Company: avaya
Module: RC-MLT-MIB
rcMltInterfaceType OBJECT-TYPE SYNTAX INTEGER { normal(1), silent(2), uni(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This value indicates whether ports in the mlt are of type
. A port can be included in any EVPN service only if this attribute is set to uni. If the port is not part of any VLAN the interface-type is set to silent. Before adding a port to a VLAN the interface type should be changed to normal." DEFVAL { silent } ::= { rcMltEntry 36 }
Vendor: Avaya
Module: RC-MLT-MIB (RC-MLT-MIB.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.17.10.1.1 | rcMltId | 0 | 0 | A value that uniquely identifies the Multi-Link Trunk associated with this entry. |
| 1.3.6.1.4.1.2272.1.17.10.1.2 | rcMltName | 0 | 0 | An administratively-assigned name for this MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.3 | rcMltPortMembers | 0 | 0 | The set of ports that are members of this MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.4 | rcMltPortType | 0 | 0 | The type of MLT port: access(1) or trunk(2). |
| 1.3.6.1.4.1.2272.1.17.10.1.5 | rcMltNumVlanIds | 0 | 0 | Used to indicate the number of VLAN IDs that are stored in the rcMltVlanIds variable. |
| 1.3.6.1.4.1.2272.1.17.10.1.6 | rcMltVlanIds | 0 | 0 | An array used to identify which VLANs this MLT is associated with. Each VLAN ID is stored as a two octet value. The first octet … |
| 1.3.6.1.4.1.2272.1.17.10.1.7 | rcMltRowStatus | 0 | 0 | Used to create/delete entries in the rcMltTable. |
| 1.3.6.1.4.1.2272.1.17.10.1.8 | rcMltEnable | 0 | 0 | Enable the entry. |
| 1.3.6.1.4.1.2272.1.17.10.1.9 | rcMltLoadBalance | 0 | 0 | Perform load balance? |
| 1.3.6.1.4.1.2272.1.17.10.1.10 | rcMltDistributionAlgorithm | 0 | 0 | The load balancing algorithm. |
| 1.3.6.1.4.1.2272.1.17.10.1.11 | rcMltIfIndex | 0 | 0 | Used to indicate the 'logical' ifIndex assigned to this MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.12 | rcMltMltType | 0 | 0 | MLT type. |
| 1.3.6.1.4.1.2272.1.17.10.1.13 | rcMltSmltId | 0 | 0 | Split MLT id. |
| 1.3.6.1.4.1.2272.1.17.10.1.14 | rcMltRunningType | 0 | 0 | Split MLT running type. |
| 1.3.6.1.4.1.2272.1.17.10.1.15 | rcMltSvlanPortType | 0 | 0 | Set MLT port type. |
| 1.3.6.1.4.1.2272.1.17.10.1.16 | rcMltMulticastDistribution | 0 | 0 | Enable/Disable multicast distribution per mlt. |
| 1.3.6.1.4.1.2272.1.17.10.1.17 | rcMltLacp10gBackup | 0 | 0 | Enable/Disable 10G Mlt reliance backup mode. |
| 1.3.6.1.4.1.2272.1.17.10.1.18 | rcMltAggregatable | 0 | 0 | Enable/Disable link aggregation on a MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.19 | rcMltClearLinkAggregate | 0 | 0 | clear link aggregate, equivalent to disable and re-enable aggregatable on the MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.20 | rcMltNtStgEnable | 0 | 0 | Indicates whether this MLT is operating in Nortel Mode or in Cisco Mode. true = Nortel Mode false = Cisco Mode. |
| 1.3.6.1.4.1.2272.1.17.10.1.21 | rcMltDesignatedPort | 0 | 0 | Indicates the Designated port for the MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.22 | rcMltAggOperState | 0 | 0 | Link aggregation state on a MLT. |
| 1.3.6.1.4.1.2272.1.17.10.1.23 | rcMltAggTimeOfLastOperChange | 0 | 0 | The time value since the interface entered its current operational state. |
| 1.3.6.1.4.1.2272.1.17.10.1.24 | rcMltVplsMgmtVlan | 0 | 0 | Management Vlan is configured on this mlt |
| 1.3.6.1.4.1.2272.1.17.10.1.25 | rcMltLoadDistributionOption | 0 | 0 | Used to specify the Load Balancing option for MLT in UNI |
| 1.3.6.1.4.1.2272.1.17.10.1.26 | rcMltUniAggrMacIdx | 0 | 0 | Used to specify the index of the mac address pool reserved for MLT uni |
| 1.3.6.1.4.1.2272.1.17.10.1.27 | rcMltUniAggrMacAddress | 0 | 0 | Used to display the mac address reserved for this MLT |
| 1.3.6.1.4.1.2272.1.17.10.1.28 | rcMltQinqEtherType | 0 | 0 | The qinq ether type value. It should be displayed and input as Hex value. It would only be used when MLT is associated with QnQ s… |
| 1.3.6.1.4.1.2272.1.17.10.1.29 | rcMltEgressCosProfileName | 0 | 0 | Mlt Egress COS Profile Name, which is defined by rcCosProfileTable |
| 1.3.6.1.4.1.2272.1.17.10.1.30 | rcMltEgressPolicerAdminState | 0 | 0 | Enable/disable Mlt Egress Policer |
| 1.3.6.1.4.1.2272.1.17.10.1.31 | rcMltAggrEgressBandwidth | 0 | 0 | Aggregated Egress Bandwidth Policer is used. |
| 1.3.6.1.4.1.2272.1.17.10.1.32 | rcMltAggrIngressBandwidth | 0 | 0 | Aggregated Ingress Bandwidth Policer is used. |
| 1.3.6.1.4.1.2272.1.17.10.1.33 | rcMltAggrMacAlloc | 0 | 0 | Aggregated Mac Allocation is used |
| 1.3.6.1.4.1.2272.1.17.10.1.34 | rcMltAggMinLink | 0 | 0 | If number of active links goes below configured minimum-link number, the entire LAG is declared down. |
| 1.3.6.1.4.1.2272.1.17.10.1.35 | rcMltMtu | 0 | 0 | MTU for ports in Mlt |
| 1.3.6.1.4.1.2272.1.17.10.1.37 | rcMltConfiguredMembers | 0 | 0 | The set of ports that are configured members of this MLT. Toronto release allows us to add a port to a LACP enabled MLT. These po… |
| 1.3.6.1.4.1.2272.1.17.10.1.38 | rcMltMtuAdminState | 0 | 0 | Set Mlt MTU enable or disable |