To enable buffer wrap-around when buffer is full.
If set, pcap will continue to capture pkts, otherwise
stops pkt storing
Parsed from file RC-DIAG-MIB.mib.txt
Company: avaya
Module: RC-DIAG-MIB
rcDiagPcapBufferWrap OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "To enable buffer wrap-around when buffer is full. If set, pcap will continue to capture pkts, otherwise stops pkt storing" DEFVAL { false } ::= { rcDiagPcap 2 }
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.23.15.2.0 | rcDiagPcapBufferWrap | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.23.15.1 | rcDiagPcapEnable | 1 | 1 | To enable pcap in secondary CPU |
| 1.3.6.1.4.1.2272.1.23.15.3 | rcDiagPcapPcmciaWrap | 1 | 1 | To wrap around the PCMCIA when saving data in PCMCIA |
| 1.3.6.1.4.1.2272.1.23.15.4 | rcDiagPcapFrameSize | 1 | 1 | Number of bytes of pkts needs to be stored |
| 1.3.6.1.4.1.2272.1.23.15.5 | rcDiagPcapBufferSize | 1 | 1 | memory to be allocated for capturing the pkt |
| 1.3.6.1.4.1.2272.1.23.15.6 | rcDiagPcapAutoSave | 1 | 1 | To save data automatically when buffer is full |
| 1.3.6.1.4.1.2272.1.23.15.7 | rcDiagPcapAutoSaveFileName | 1 | 1 | Name of the file in which the pkt is to be stored |
| 1.3.6.1.4.1.2272.1.23.15.8 | rcDiagPcapAutoSaveDevice | 1 | 1 | Where to store the captured pkts. If the option is network, the user need to enter an IP address also |
| 1.3.6.1.4.1.2272.1.23.15.9 | rcDiagPcapAutoSaveNetworkIpAddress | 1 | 1 | ip address of the remote host where the data needs to be stored. This field is valid only if the device is network |
| 1.3.6.1.4.1.2272.1.23.15.10 | rcDiagPcapFilterTableSize | 1 | 1 | Used to indicate the number of entries in the Filter table |
| 1.3.6.1.4.1.2272.1.23.15.11 | rcDiagPcapFilterTable | 1 | 34 | A table used to store pcap secondary filters |
| 1.3.6.1.4.1.2272.1.23.15.12 | rcDiagPcapAdvancedFilterTableSize | 1 | 1 | Used to indicate the number of entries in the Filter table advanced parameter |
| 1.3.6.1.4.1.2272.1.23.15.13 | rcDiagPcapAdvancedFilterTable | 1 | 16 | A table used to store pcap secondary filters |
| 1.3.6.1.4.1.2272.1.23.15.14 | rcDiagPcapCopyFileName | 1 | 1 | Used to indicate the file name. When set, the PCAP data from PCAP engine RAM is stored into this file in PCAP engine |
| 1.3.6.1.4.1.2272.1.23.15.15 | rcDiagPcapResetStat | 1 | 1 | To Reset PCAP statistics |
| 1.3.6.1.4.1.2272.1.23.15.16 | rcDiagPcapStatPacketCapacityCount | 1 | 1 | Packet Capacity Count |
| 1.3.6.1.4.1.2272.1.23.15.17 | rcDiagPcapStatNumberOfPacketsReceived | 1 | 1 | Number of packets received in PCAP engine |
| 1.3.6.1.4.1.2272.1.23.15.18 | rcDiagPcapStatNumberOfPacketsAccumulated | 1 | 1 | Number of packets captured in PCAP engine |
| 1.3.6.1.4.1.2272.1.23.15.19 | rcDiagPcapStatNumberOfPacketsDroppedInPcapEngine | 1 | 1 | Number of packets dropped in PCAP engine by filters |
| 1.3.6.1.4.1.2272.1.23.15.20 | rcDiagPcapStatNumberOfPacketsDroppedInHardware | 1 | 1 | Number of packets dropped in Hardware |
| 1.3.6.1.4.1.2272.1.23.15.21 | rcDiagPcapDataValid | 1 | 1 | A true/false value that indicate the return data whether is valid. |
| 1.3.6.1.4.1.2272.1.23.15.22 | rcDiagPcapEtherTypeForSvlanLevel | 1 | 1 | EtherType of svlan level. |