This variable represents the loopback confi-
guration of the DS1 interface. Agents support-
ing read/write access should return badValue in
response to a requested loopback state that the
interface does not support. The values mean:.
dsx1NoLoop
Not in the loopback state. A device that
is not capable of performing a loopback on
the interface shall always return this as
it's value.
dsx1PayloadLoop
The received signal at this interface is
looped through the device. Typically the
received signal is looped back for re-
transmission after it has passed through
the device's framing function.
dsx1LineLoop
The received signal at this interface does
not go through the device (minimum pene-
tration) but is looped back out.
dsx1OtherLoop
Loopbacks that are not defined here.
Parsed from file xldv20.mib.txt
Company: None
Module: XLDV20-MIB
This variable represents the loopback confi-
guration of the DS1 interface. Agents support-
ing read/write access should return badValue in
response to a requested loopback state that the
interface does not support. The values mean:.
dsx1NoLoop
Not in the loopback state. A device that
is not capable of performing a loopback on
the interface shall always return this as
it's value.
dsx1PayloadLoop
The received signal at this interface is
looped through the device. Typically the
received signal is looped back for re-
transmission after it has passed through
the device's framing function.
dsx1LineLoop
The received signal at this interface does
not go through the device (minimum pene-
tration) but is looped back out.
dsx1OtherLoop
Loopbacks that are not defined here.
Parsed from file XLDV20-MIB.mib
Module: XLDV20-MIB
Vendor: Fujitsu Siemens Computers
Module: XLDV20-MIB
[Automatically extracted from oidview.com]
xldv20Dsx1LoopbackConfig OBJECT-TYPE SYNTAX INTEGER { dsx1NoLoop(1), dsx1PayloadLoop(2), dsx1LineLoop(3), dsx1OtherLoop(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should return badValue in response to a requested loopback state that the interface does not support. The values mean:. dsx1NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as it's value. dsx1PayloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for re- transmission after it has passed through the device's framing function. dsx1LineLoop The received signal at this interface does not go through the device (minimum pene- tration) but is looped back out. dsx1OtherLoop Loopbacks that are not defined here. " ::= { xldv20Dsx1ConfigEntry 3 }
xldv20Dsx1LoopbackConfig OBJECT-TYPE SYNTAX INTEGER { dsx1NoLoop(1), dsx1PayloadLoop(2), dsx1LineLoop(3), dsx1OtherLoop(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should return badValue in response to a requested loopback state that the interface does not support. The values mean:. dsx1NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as it's value. dsx1PayloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for re- transmission after it has passed through the device's framing function. dsx1LineLoop The received signal at this interface does not go through the device (minimum pene- tration) but is looped back out. dsx1OtherLoop Loopbacks that are not defined here. " ::= { xldv20Dsx1ConfigEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.1 | xldv20Dsx1LineType | 0 | 0 | This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits… |
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.2 | xldv20Dsx1LineCoding | 0 | 0 | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its chara… |
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.4 | xldv20Dsx1SignalMode | 0 | 0 | The signal mode. 'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that T1 Robbed … |
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.5 | xldv20Dsx1TransmitClockSource | 0 | 0 | The source of Transmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTi… |
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.6 | xldv20Dsx1Fdl | 0 | 0 | This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: 'other' indicates that a pro… |