This bitmap describes the use of the facili-
ties data link, and is the sum of the capabili-
ties:
'other' indicates that a protocol other than
one following is used.
'dsx1Ansi-T1-403' refers to the FDL exchange
recommended by ANSI.
'dsx1Att-54016' refers to ESF FDL exchanges.
'dsx1Fdl-none' indicates that the device does
not use the FDL.
Parsed from file xldv20.mib.txt
Company: None
Module: XLDV20-MIB
This bitmap describes the use of the facili-
ties data link, and is the sum of the capabili-
ties:
'other' indicates that a protocol other than
one following is used.
'dsx1Ansi-T1-403' refers to the FDL exchange
recommended by ANSI.
'dsx1Att-54016' refers to ESF FDL exchanges.
'dsx1Fdl-none' indicates that the device does
not use the FDL.
Parsed from file XLDV20-MIB.mib
Module: XLDV20-MIB
Vendor: Fujitsu Siemens Computers
Module: XLDV20-MIB
[Automatically extracted from oidview.com]
xldv20Dsx1Fdl OBJECT-TYPE SYNTAX INTEGER { other(1), dsx1Ansi-T1-403(2), dsx1Att-54016(4), dsx1Fdl-none(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: 'other' indicates that a protocol other than one following is used. 'dsx1Ansi-T1-403' refers to the FDL exchange recommended by ANSI. 'dsx1Att-54016' refers to ESF FDL exchanges. 'dsx1Fdl-none' indicates that the device does not use the FDL. " ::= { xldv20Dsx1ConfigEntry 6 }
xldv20Dsx1Fdl OBJECT-TYPE SYNTAX INTEGER { other(1), dsx1Ansi-T1-403(2), dsx1Att-54016(4), dsx1Fdl-none(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: 'other' indicates that a protocol other than one following is used. 'dsx1Ansi-T1-403' refers to the FDL exchange recommended by ANSI. 'dsx1Att-54016' refers to ESF FDL exchanges. 'dsx1Fdl-none' indicates that the device does not use the FDL. " ::= { xldv20Dsx1ConfigEntry 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.1 | xldv20Dsx1LineType | 0 | 0 | This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits… |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.2 | xldv20Dsx1LineCoding | 0 | 0 | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its chara… |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.3 | xldv20Dsx1LoopbackConfig | 0 | 0 | This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should retur… |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.4 | xldv20Dsx1SignalMode | 0 | 0 | The signal mode. 'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that T1 Robbed … |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.11.1.5 | xldv20Dsx1TransmitClockSource | 0 | 0 | The source of Transmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTi… |