Feature not supported.
This attribute marks the command to activate a configured set of
(command: activateData), which includes minimum and maximum
bandwidth in upstream and downstream direction, latency and some
additional modem parameters (power boost, warmstart, VDSL mode,
Sleep mode, PSD mask, power adaptation).
Parsed from file xldv20.mib.txt
Company: None
Module: XLDV20-MIB
Feature not supported.
This attribute marks the command to activate a configured set of
(command: activateData), which includes minimum and maximum
bandwidth in upstream and downstream direction, latency and some
additional modem parameters (power boost, warmstart, VDSL mode,
Sleep mode, PSD mask, power adaptation).
Parsed from file XLDV20-MIB.mib
Module: XLDV20-MIB
Vendor: Fujitsu Siemens Computers
Module: XLDV20-MIB
[Automatically extracted from oidview.com]
xldv20VdcCtrlControlReq OBJECT-TYPE SYNTAX Xldv20ControlReq ACCESS not-accessible STATUS mandatory DESCRIPTION " Feature not supported. This attribute marks the command to activate a configured set of (command: activateData), which includes minimum and maximum bandwidth in upstream and downstream direction, latency and some additional modem parameters (power boost, warmstart, VDSL mode, Sleep mode, PSD mask, power adaptation). " ::= { xldv20VdcControl 1 }
xldv20VdcCtrlControlReq OBJECT-TYPE SYNTAX Xldv20ControlReq ACCESS not-accessible STATUS mandatory DESCRIPTION " Feature not supported. This attribute marks the command to activate a configured set of (command: activateData), which includes minimum and maximum bandwidth in upstream and downstream direction, latency and some additional modem parameters (power boost, warmstart, VDSL mode, Sleep mode, PSD mask, power adaptation). " ::= { xldv20VdcControl 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.1.0 | xldv20VdcCtrlControlReq | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.2 | xldv20VdcCtrlControlStatus | 1 | 1 | This attribute indicates the status of a control request. requestIdle, requestBusy, requestPassed, requestFailed . |
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.3 | xldv20VdcCtrlIfIndex | 1 | 1 | It is the relevant interface index of the VDSL-C PPTP. |
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.4 | xldv20VdcCtrlMinRateDn | 1 | 1 | The desired lower limit of the downstream data rate. |
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.5 | xldv20VdcCtrlMinRateUp | 1 | 1 | The desired lower limit of the upstream data rate. |
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.6 | xldv20VdcCtrlMaxRateDn | 1 | 1 | The upper limit of the downstream data rate. |
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.7 | xldv20VdcCtrlMaxRateUp | 1 | 1 | The upper limit of the upstream data rate. |
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.8 | xldv20VdcCtrlLatencyDn | 1 | 1 | Selects interleave depth (i.e. latency time) used for error correction in downstream direction. |
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.9 | xldv20VdcCtrlLatencyUp | 1 | 1 | Selects interleave depth (i.e. latency time) used for error correction in upstream direction. |
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.10 | xldv20VdcCtrlPowerBoost | 1 | 1 | Configured power boost mode. |
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.11 | xldv20VdcCtrlWarmStart | 1 | 1 | Configured warmstart option. |
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.12 | xldv20VdcCtrlVdslMode | 1 | 1 | Configured VDSL mode option. |
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.13 | xldv20VdcCtrlSleepMode | 1 | 1 | Configured sleep mode option. |
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.14 | xldv20VdcCtrlPsdMask | 1 | 1 | Configured PSD mask option (electro-magnetic interference effects, M1 for strong and M2 for weak effects). |
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.15 | xldv20VdcCtrlPowerAdaptation | 1 | 1 | Configured power adaptation option. |
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.16 | xldv20VdcCtrlControlReqResult | 1 | 1 | This read-only attribute informs about the result of the last user command. |
| 1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.17 | xldv20VdcCtrlControlTimeStamp | 1 | 1 | This read-only attribute informs about the time stamp of the last command (end of command). |