Vendor: Fujitsu Siemens Computers
Module: XLDV20-MIB
[Automatically extracted from oidview.com]
xldv20VdcControl OBJECT IDENTIFIER ::= { xldv20Tlm 3 }
xldv20VdcControl OBJECT IDENTIFIER ::= { xldv20Tlm 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.1 | xldv20VdcCtrlControlReq | 1 | 1 | Feature not supported. This attribute marks the command to activate a configured set of (command: activateData), which includes m… |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.2 | xldv20VdcCtrlControlStatus | 1 | 1 | This attribute indicates the status of a control request. requestIdle, requestBusy, requestPassed, requestFailed . |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.3 | xldv20VdcCtrlIfIndex | 1 | 1 | It is the relevant interface index of the VDSL-C PPTP. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.4 | xldv20VdcCtrlMinRateDn | 1 | 1 | The desired lower limit of the downstream data rate. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.5 | xldv20VdcCtrlMinRateUp | 1 | 1 | The desired lower limit of the upstream data rate. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.6 | xldv20VdcCtrlMaxRateDn | 1 | 1 | The upper limit of the downstream data rate. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.7 | xldv20VdcCtrlMaxRateUp | 1 | 1 | The upper limit of the upstream data rate. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.8 | xldv20VdcCtrlLatencyDn | 1 | 1 | Selects interleave depth (i.e. latency time) used for error correction in downstream direction. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.9 | xldv20VdcCtrlLatencyUp | 1 | 1 | Selects interleave depth (i.e. latency time) used for error correction in upstream direction. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.10 | xldv20VdcCtrlPowerBoost | 1 | 1 | Configured power boost mode. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.11 | xldv20VdcCtrlWarmStart | 1 | 1 | Configured warmstart option. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.12 | xldv20VdcCtrlVdslMode | 1 | 1 | Configured VDSL mode option. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.13 | xldv20VdcCtrlSleepMode | 1 | 1 | Configured sleep mode option. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.14 | xldv20VdcCtrlPsdMask | 1 | 1 | Configured PSD mask option (electro-magnetic interference effects, M1 for strong and M2 for weak effects). |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.15 | xldv20VdcCtrlPowerAdaptation | 1 | 1 | Configured power adaptation option. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.16 | xldv20VdcCtrlControlReqResult | 1 | 1 | This read-only attribute informs about the result of the last user command. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.3.17 | xldv20VdcCtrlControlTimeStamp | 1 | 1 | This read-only attribute informs about the time stamp of the last command (end of command). |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.231.7.1.2.1.1.4.4.1 | xldv20IfTable | 1 | 12 | xldv20Iftable |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.2 | xldv20AdcControl | 17 | 34 | None |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.4 | xldv20AdcPPTPTable | 1 | 29 | The physical path termination point table for ADSL Central interface. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.5 | xldv20VdcPPTPTable | 1 | 21 | Feature not supported. The physical path termination point table for VDSL C. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.6 | xldv20IbmPPTPTable | 1 | 3 | The physical path termination point table for the IBM IF. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.7 | xldv20Ds3NePPTPTable | 1 | 6 | The near end physical path termination point table for the DS3 interface. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.8 | xldv20E3NePPTPTable | 1 | 11 | The physical path termination point table for the E3 IF. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.9 | xldv20Stm1NePPTPTable | 1 | 15 | The physical path termination point table for the STM1 IF. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.10 | xldv20Sts3NePPTPTable | 1 | 17 | The physical path termination point table for the STS3c IF. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.11 | xldv20Dsx1ConfigTable | 1 | 7 | The DS1 Configuration table. |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.12 | xldv20SdcControl | 8 | 16 | None |
1.3.6.1.4.1.231.7.1.2.1.1.4.4.13 | xldv20SdcPPTPTable | 1 | 16 | The physical path termination point table for SDSL C. |