A bitmap summary of any failures detected during the unit's
Power On Self Test (POST). If the value of this object is 0,
then no failures were detected. A value of 0 is also returned
if there is no unit in that position. Users should refer to the
n2feBaseUnitType object above to determine if the unit is present.
For each type of detected failure, 2 raised to the power noted
below is logically ORed into this object.
Power Post Failure
0 NVRAM failure
1 CAM/internal switch failure
Note these are non-fatal POST errors. The agent cannot report
fatal POST errors in most cases since such errors prevent the
affected unit from being recognizable.
Parsed from file Compaq-n2fe.mib.txt
Company: compaq
Module: CPQN2FE-MIB
n2fePOSTStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A bitmap summary of any failures detected during the unit's Power On Self Test (POST). If the value of this object is 0, then no failures were detected. A value of 0 is also returned if there is no unit in that position. Users should refer to the n2feBaseUnitType object above to determine if the unit is present. For each type of detected failure, 2 raised to the power noted below is logically ORed into this object. Power Post Failure 0 NVRAM failure 1 CAM/internal switch failure Note these are non-fatal POST errors. The agent cannot report fatal POST errors in most cases since such errors prevent the affected unit from being recognizable." ::= { n2feStackEntry 9 }
Vendor: Compaq
Module: CPQN2FE-MIB (Compaq-n2fe.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.232.101.1.3.1.1.1.1 | n2feUnitIndex | 0 | 0 | The position of the unit in the stack. The managing unit is always unit 1 in the stack. A manageable unit can be connected to … |
1.3.6.1.4.1.232.101.1.3.1.1.1.2 | n2feUnitDescr | 0 | 0 | A text description of the unit. |
1.3.6.1.4.1.232.101.1.3.1.1.1.3 | n2feBaseUnitType | 0 | 0 | The type of unit in this physical position. A value of unknown(1000) indicates a newer unit than this version of the agent suppo… |
1.3.6.1.4.1.232.101.1.3.1.1.1.4 | n2feSUMType | 0 | 0 | The type of Smart Uplink Module (SUM) attached to the unit in this physical position. |
1.3.6.1.4.1.232.101.1.3.1.1.1.5 | n2feManUnmSwitchStatus | 0 | 0 | The status of the MAN/UNM (Managed/Unmanaged) DIP switch. This switch is present on the rear panel of manageable units only. Man… |
1.3.6.1.4.1.232.101.1.3.1.1.1.7 | n2feSUMResetStatus | 0 | 0 | This object allows the user to physically reset the SUM port on a unit in the stack. Issuing the reset-SUM-port(2) value causes… |
1.3.6.1.4.1.232.101.1.3.1.1.1.8 | n2feBkplnStatus | 0 | 0 | DURABLE: The backplane connection status of the unit. If no unit is present, not-applicable(3) is returned. Attempts to set t… |
1.3.6.1.4.1.232.101.1.3.1.1.1.10 | n2feForce10MbpsSwitchStatus | 0 | 0 | The status of the 10Mbps-only rotary switch on port 1 of models 2724 and 2824. When this object is force10(1), auto-negotiation… |