DURABLE: The status of the redundant port pair. The port
being monitored is termed the primary port, and is specified by
n2fePriUnitId and n2fePriPortId. The redundant, or backup, port
is specified by n2feRedUnitId and n2feRedPortId.
Writing enabled(2) to this object enables monitoring of the primary
port. This causes the backup port to be disabled, and remain
disabled until an event (link loss or autopartition) occurs which
causes the backup port to take over for the primary port. Writing
disabled(3) to this object disables monitoring for link status
changes on this port. However, if a port was designated as the
backup port for this one, it is not reenabled. Writing none(1) to
this object deletes the entry from the table. Writing tripped(4)
to this object is rejected with a BAD VALUE error; this status
is generated only by the internal backup port monitor.
NOTE: The SUM port cannot detect autopartitions.
Parsed from file Compaq-n2fe.mib.txt
Company: compaq
Module: CPQN2FE-MIB
n2feRedPortStatus OBJECT-TYPE SYNTAX INTEGER { none(1), enabled(2), disabled(3), tripped(4) } ACCESS read-write STATUS mandatory DESCRIPTION "DURABLE: The status of the redundant port pair. The port being monitored is termed the primary port, and is specified by n2fePriUnitId and n2fePriPortId. The redundant, or backup, port is specified by n2feRedUnitId and n2feRedPortId. Writing enabled(2) to this object enables monitoring of the primary port. This causes the backup port to be disabled, and remain disabled until an event (link loss or autopartition) occurs which causes the backup port to take over for the primary port. Writing disabled(3) to this object disables monitoring for link status changes on this port. However, if a port was designated as the backup port for this one, it is not reenabled. Writing none(1) to this object deletes the entry from the table. Writing tripped(4) to this object is rejected with a BAD VALUE error; this status is generated only by the internal backup port monitor. NOTE: The SUM port cannot detect autopartitions." ::= { n2feRedPortEntry 6 }
Vendor: Compaq
Module: CPQN2FE-MIB (Compaq-n2fe.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.101.1.3.3.1.1.1 | n2fePriRptrId | 0 | 0 | The primary port's logical repeater ID. This number is always 1. |
| 1.3.6.1.4.1.232.101.1.3.3.1.1.2 | n2fePriUnitId | 0 | 0 | The primary port's unit ID within the stack. |
| 1.3.6.1.4.1.232.101.1.3.3.1.1.3 | n2fePriPortId | 0 | 0 | The primary port's port ID. |
| 1.3.6.1.4.1.232.101.1.3.3.1.1.4 | n2feRedUnitId | 0 | 0 | DURABLE: The redundant port's unit ID within the stack. A value of 0 indicates that no redundant port has been specified. |
| 1.3.6.1.4.1.232.101.1.3.3.1.1.5 | n2feRedPortId | 0 | 0 | DURABLE: The redundant port's port ID. A value of 0 indicates that no redundant port has been specified. |