Array Accelerator Board Bad Data.
The following values are valid:
None (2)
Indicates that no data loss occurred. The battery packs were
properly charged when the system was initialized.
Possible (3)
Indicates that at power up, the battery packs were not
sufficiently charged. Because the batteries did not retain
sufficient charge when the system resumed power, the board
has not retained any data that may have been stored.
If no data was on the board, no data was lost. Several things
may have caused this condition:
* If the system was without power for eight days, and the
battery packs were on (battery packs only activate if
system looses power unexpectedly), any data that may have
been stored in the cache was lost.
* There may be a problem with the battery pack.
See the Battery Status for more information.
* This status will also appear if the Array Accelerator
board is replaced with a new board that has discharged
batteries. No data has been lost in this case, and posted
writes will automatically be enabled when the batteries
reach full charge.
Parsed from file CPQIDA2.MIB.txt
Company: None
Module: CPQIDA-MIB
Array Accelerator Board Bad Data.
The following values are valid:
None (2)
Indicates that no data loss occurred. The battery packs were
properly charged when the system was initialized.
Possible (3)
Indicates that at power up, the battery packs were not
sufficiently charged. Because the batteries did not retain
sufficient charge when the system resumed power, the board
has not retained any data that may have been stored.
If no data was on the board, no data was lost. Several things
may have caused this condition:
* If the system was without power for eight days, and the
battery packs were on (battery packs only activate if
system looses power unexpectedly), any data that may have
been stored in the cache was lost.
* There may be a problem with the battery pack.
See the Battery Status for more information.
* This status will also appear if the Array Accelerator
board is replaced with a new board that has discharged
batteries. No data has been lost in this case, and posted
writes will automatically be enabled when the batteries
reach full charge.
Parsed from file CPQIDA-MIB.mib
Module: CPQIDA-MIB
cpqDaAccelBadData OBJECT-TYPE SYNTAX INTEGER { other(1), none(2), possible(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Array Accelerator Board Bad Data. The following values are valid: None (2) Indicates that no data loss occurred. The battery packs were properly charged when the system was initialized. Possible (3) Indicates that at power up, the battery packs were not sufficiently charged. Because the batteries did not retain sufficient charge when the system resumed power, the board has not retained any data that may have been stored. If no data was on the board, no data was lost. Several things may have caused this condition: * If the system was without power for eight days, and the battery packs were on (battery packs only activate if system looses power unexpectedly), any data that may have been stored in the cache was lost. * There may be a problem with the battery pack. See the Battery Status for more information. * This status will also appear if the Array Accelerator board is replaced with a new board that has discharged batteries. No data has been lost in this case, and posted writes will automatically be enabled when the batteries reach full charge." ::= { cpqDaAccelEntry 4 }
Vendor: Compaq
Module: CPQIDA-MIB
[Automatically extracted from oidview.com]
cpqDaAccelBadData OBJECT-TYPE SYNTAX INTEGER { other(1), none(2), possible(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Array Accelerator Board Bad Data. The following values are valid: None (2) Indicates that no data loss occurred. The battery packs were properly charged when the system was initialized. Possible (3) Indicates that at power up, the battery packs were not sufficiently charged. Because the batteries did not retain sufficient charge when the system resumed power, the board has not retained any data that may have been stored. If no data was on the board, no data was lost. Several things may have caused this condition: * If the system was without power for eight days, and the battery packs were on (battery packs only activate if system looses power unexpectedly), any data that may have been stored in the cache was lost. * There may be a problem with the battery pack. See the Battery Status for more information. * This status will also appear if the Array Accelerator board is replaced with a new board that has discharged batteries. No data has been lost in this case, and posted writes will automatically be enabled when the batteries reach full charge." ::= { cpqDaAccelEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.3.2.2.2.1.1 | cpqDaAccelCntlrIndex | 0 | 0 | Array Accelerator Board Controller Index. This value is a logical number whose meaning is OS dependent. The value has a direct ma… |
| 1.3.6.1.4.1.232.3.2.2.2.1.2 | cpqDaAccelStatus | 0 | 0 | Array Accelerator Board Status. This describes the status of the accelerator write cache. The status can be: Other (1) Indicates th… |
| 1.3.6.1.4.1.232.3.2.2.2.1.3 | cpqDaAccelMemory | 0 | 0 | Write Cache Memory. This shows the amount of memory allocated for the write cache in kilobytes. Because data is kept in duplicat… |
| 1.3.6.1.4.1.232.3.2.2.2.1.5 | cpqDaAccelErrCode | 0 | 0 | Array Accelerator Board Error Code. Use this to determine the status of the write cache operations. The status can be: Other (1) In… |
| 1.3.6.1.4.1.232.3.2.2.2.1.6 | cpqDaAccelBattery | 0 | 0 | Array Accelerator Board Battery Status. This monitors the status of each battery pack on the board. The batteries can only recha… |
| 1.3.6.1.4.1.232.3.2.2.2.1.7 | cpqDaAccelReadErrs | 0 | 0 | Array Accelerator Board Read Errors. This shows the total number of read memory parity errors that were detected while reading fr… |
| 1.3.6.1.4.1.232.3.2.2.2.1.8 | cpqDaAccelWriteErrs | 0 | 0 | Array Accelerator Board Write Errors. This shows the total number of write memory parity errors that were detected while writing … |
| 1.3.6.1.4.1.232.3.2.2.2.1.9 | cpqDaAccelCondition | 0 | 0 | The condition of the device. This value represents the overall condition of this array accelerator. |
| 1.3.6.1.4.1.232.3.2.2.2.1.10 | cpqDaAccelReadMemory | 0 | 0 | Read Cache Memory. This shows the amount of memory allocated for the read cache in kilobytes. Because data is kept in duplicate … |
| 1.3.6.1.4.1.232.3.2.2.2.1.11 | cpqDaAccelSerialNumber | 0 | 0 | Array Accelerator Serial Number. The serial number of the Array Accelerator. This field will be a null (size 0) string if the ac… |
| 1.3.6.1.4.1.232.3.2.2.2.1.12 | cpqDaAccelTotalMemory | 0 | 0 | Total Cache Memory. This value is the total amount of accelerator memory in kilobytes, including both battery-backed and non-batt… |
| 1.3.6.1.4.1.232.3.2.2.2.1.13 | cpqDaAccelReadCachePercent | 0 | 0 | Read Cache Percent. This shows the percent of cache memory allocated for read ahead caching. If the data cannot be determined or… |
| 1.3.6.1.4.1.232.3.2.2.2.1.14 | cpqDaAccelWriteCachePercent | 0 | 0 | Write Cache Percent. This shows the percent of cache memory allocated for posted write caching. If the data cannot be determined… |
| 1.3.6.1.4.1.232.3.2.2.2.1.15 | cpqDaAccelFailedBatteries | 0 | 0 | Array Accelerator Failed Batteries. This lists the location of accelerator failed batteries. Each octet present contains the posi… |
| 1.3.6.1.4.1.232.3.2.2.2.1.16 | cpqDaAccelBackupPowerSource | 0 | 0 | Array Accelerator Board Backup Power Source. This describes the backup power source being used by the Array Accelerator board. The… |